Tosoh HLC-723G7 Glycohemoglobin Analyzer

Flow control unit is not included

Yamato WA-301B Auto Pure Benchtop Type 1 Water Purification System, 120V Configuration Benchtop Flo (more)w Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, benchtop or wall mount water purification system in 120V producing Type 1 deionized water. Low cost of ownership. Water is purified using a stage purification process which includes high-purity ion exchange resins to remove dissolved minerals and internal recirculation to maintain purity. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WA-301B Auto Pure Benchtop Type 1 Water Purification System, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus 30400153 Modular Heat Block, 12 x 15/16 mm Tubes The Ohaus 30400153 Modular Heat Block, 12 x 1 (more)5/16 mm Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400153 Modular Heat Block, 12 x 15/16 mm Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 4 x 9-15ml Adapters, Cat. # 022639129 New in box Eppendorf 4 x 9-15ml adapters (Cat. # 022 (more)639129) for round 85ml buckets with the A-4-38 rotor. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 4 x 9-15ml Adapters, Cat. # 022639129 includes: - Full 6 Month Parts and Labor Warranty

Program list: See photo’s Maximum allowable pressure: 2.8 bar Maximum allowable temparature: 142°C W (more)ater supply: Distilled or deionized water Average water consumption per cycle: 3.5 L Required air supply: 3 – 6 bar Maximum load: Instruments – 30 kg, Textiles – 17 kg, Liquids – 21 Liter Chamber volume: 84 L Chamber dimensions (⌀xD): 413 x 610 mm Dimensions (WxHxD): 735 x 945 x 600 mm Weight: 170 kg

Dimensions (HxWxD): 1750 x 1160 x 520 mm

LTE Scientific Unitemp Drying Cabinet This item was removed from a university lab where it was surpl (more)us to requirements. It is in good condition and powers on with the heater running and both bottom and top circulating fans operating. Specifications:- Capacity: 534 litres - Six heat settings, max temperature 65˚C - Four adjustable wire shelf racks - Toughened glass door The item was temperature tested (thermometer not included), and the following observations were made:- Maximum setting (6) only reached 47°C with the top circulating fan on. - When the top fan was turned off, the temperature climbed to 65.8°C and stabilised. Model: Unitemp Serial No.: K10183

This MP FastPrep - 24 Sample Preparation System was removed from a university lab where it was surpl (more)us to requirements. The item powers on and is in a reasonably used cosmetic condition, unable to test further due to a 'Cancel Error' "Improper closing of the dome will be indicated by display Cancel" Due to this error, this item is sold as Spares or Repairs.

Applied Biosystems MDS SCIEX QStar System Software This was removed from a university lab where it w (more)as surplus to requirements. Included are the following: 1x Analyst® QS 1.1 SoftwareP/N 1012847 1x Metabolite ID 1.3 for Analyst® QS 1.1 SoftwareP/N 1012866 1x Analyst QS 1.1 Software Validation CertificateDated 03/12/20041x Metabolite ID 1.3 for Analyst® QS 1.1 Validation CertificateDated 03/12/2004. 2x Copies of License Agreement for Analyst® QS 1.1 Software1x Metabolite ID 1.3 for Analyst® QS 1.1 Software Release Notes

Pfeiffer MVP 020-3 Diaphragm Pump Final Pressure 2 hPa / 1.5 Torr / 2 mbar Maximum Pumping Speed 1. (more)4 m 3/h / 0.82404 cfm / 23.3338 l/min Number of Heads/Stages 2/3 Features - Diaphragm pump with a pumping speed of up to 1.4 m3/h - No hydrocarbons: Completely dry & oil-free diaphragm pump - Low noise level, minimal vibrations and compact design, ideal also for use in laboratories - Low operating costs thanks to the highest quality, short maintenance times and long maintenance intervals - Suitable for all voltages worldwide The Pfeiffer MVP 020-3 Diaphragm Pump represents the pinnacle of performance in vacuum technology, offering a robust solution for demanding laboratory environments. With a pumping speed that reaches up to 1.4 m³/h and compatibility with all global voltage standards, this diaphragm pump ensures a seamless and powerful operation across a variety of applications. The MVP 020-3 is completely dry and oil-free, eliminating contamination risks and reducing maintenance requirements. This pump is designed with user convenience in mind, featuring a compact and low-vibration operation that produces only 48 dB(A) of noise, making it one of the quietest in its class. It's engineered for reliability with short maintenance intervals and long maintenance times, significantly lowering operating costs. Additionally, the MVP 020-3 comes with an integral leak rate of 1 Pa m³/s, and it can handle intake and exhaust pressures up to 1,100 hPa. Certified according to UL/CSA 61010-1 standards and equipped with a gas ballast as an optional accessory, this pump is suited for a wide range of applications, from basic laboratory tasks to complex industrial processes. INCLUDED: The Pfeiffer MVP 020-3 Diaphragm Pump includes: - Silencer - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty