Thermo ScientificTKA Reverse Osmosis System 120-RDS

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)a warning light flashes. It was not tested further. It is sold for spares/repairs

Labconco FreeZone Stoppering Tray Dryer with 6-Port Manifold FreeZone Stoppering Tray Dryers lyophi (more)lize moderate to largeloads of vials or serum bottles and stopper them under vacuum. They offertemperature control from -40 to +40C. Options include a 6-port manifold,isolation valve and sample trays. A pneumatic mechanism stoppers containers undervacuum on three large adjustable processing shelves, 16.5” x 12” each. AnHCFC/CFC-free refrigeration system and electric heater cool and heat fluidmedium that is circulated through the shelves to maintain shelf temperatureswithin ±1C. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen.Features Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors Chamber pre-freezes samples to save time and money by eliminating need for separate freezer and product transfer Up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C 1/8 in. OD backfill port introduces sterile air or inert gas from outside source to chamber, protecting samples from atmospheric moisture and contaminants Lyo-Works™ OS provides real time display of freeze dryer and tray dryer parameters on 5 in. full color, capacitive touch screen on connected FreeZone 6, 12, or 18L Freeze Dryer (sold separately) Microprocessor-based controller allows up to 30 different temperature programs to be stored and repeated, each using up to 16 different steps Display provides navigation to manual or program mode, probe temperatures, vacuum in mBar, Torr or Pa, step of program in progress, time remaining in present step, and end of program, as well as alarms Optional 6-Port Tray Dryer Manifold accommodates either 1/2 in. or 3/4 in. flask adapters and connect to flasks and other glassware Optional built-in isolation valve separates Stoppering Tray Dryer from freeze dryer to shorten time necessary to reestablish working vacuum levels and to provide means for determining end point Freeze dryer, vacuum pump with displacement of at least 163L/minute, and freeze dry glassware (if not bulk freeze drying) are required (not included) INCLUDED: The Labconco 794801100 FreeZone Stoppering Tray Dryer with 6-Port Manifold 115V, 60Hz includes: - Sample Temp Sensor x 3 - Communication Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Edwards Auto 306 Thermal Evaporator Coating System This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but has not been tested further. The system boots up and the internal pump runs. Item contains:Edwards RV12 PumpSerial#: 006774738 Edwards Oil Mist Filter EMF10Code#: A223 04 198 Edwards PV25EKASerial#: 006693767 Edwards B3060424ASerial#: 006739951

PROFESSIONAL SCALE, SUITABLE FOR DIFFERENT USES Striking the ideal balance of inventive features and (more) simple, functional weighing capabilities, the OHAUS Adventurer Series has all the applications you need for routine weighing and measurement tasks. Featuring a color touchscreen, GLP/GMP compliance features, two USB ports, and more, the Adventurer is the most comprehensive scale in its class. - Color touchscreen, with icons and intuitive guidance - Useful for a wide variety of applications - Structure and construction among the best Ohaus: resistant, large weighing surfaces, space-saving design of the draft shield and protective hood allow use in laboratory, educational and industrial environments. Other standard features and equipment RS232 interface, integrated weigh below hook, protective cover for the entire base structure, removable stainless steel pan, die-cast metal base, safety bracket, front and illuminated level bubble, four feet adjustable, software lockout menu, stability indicator, overload/underload indicators in software, user selectable environmental settings, audible indicator, user selectable brightness level settings, auto dimming, touchscreen calibration, auto tare, operating language user selectable (nine). MODELLI DISPONIBILI LABORATORY INSTRUMENT Dual USB ports. Front USB easily accessible and simplifies data downlaod. On the back of the scale there is a second USB port to be able to connect it to the PC. It will also be possible to upload user settings to USB, saving different profiles and transporting them to other Adventurer scales. Real time clock with GLP/GMP data. This feature keeps accurate time even in the event of a power failure, and the GLP data function has the ability to log sample name, project names, and balance IDs to help meet traceability and compliance requirements. The draft shield doors consist of two glass panels that will take up very little space on your counter. The large side entrance will allow for unobstructed access and easy cleaning, ensuring a safe working environment while minimizing contamination. Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Dynamic/Animal Weighing, Totalization/Statistics, Formulation, Density Determination, Display Hold Display 4.3' (109 mm) touchscreen display with color VGA graphics resolution and user controlled brightness Operation AC adapter (included) Communication RS232, USB host, USB device (included). Real time clock with GLP/GMP data output. Framework Metal base, ABS top housing, stainless steel pan, glass draft shield with two-piece top-mounted side doors and sliding top door (1 mg models only), illuminated front level bubble, hook for weighing below, safety bar Construction features Selectable environmental filters, auto tare, user selectable pot life calibration points, software lockout and reset menu, user selectable communication settings and print options, user configurable project and user IDs, up to 9 operating languages

Yamato IC-903CW General Purpose Incubator with Window 567L, 115V Temperature Range Ambient +5°C to  (more)80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 567L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 567L natural convection incubator with communication port. Dual door system permits contents to be viewed easily without disrupting atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C INCLUDED: The Yamato IC-903CW General Purpose Incubator with Window 567L, 115V includes: - 8 x Shelves w/ 16 Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Thermo Multifuge X3 FR refrigerated centrifuge. Maximum speed for oscillating rotors 6000 rpm (7164  (more)xg) and for fixed angle rotors 15200 rpm (25,830 xg). Adjustable temperature from -10°C to +40°C (CFC-free). Timed from 1 to 99 h, 59 min or continuous operation. Programmable and 99 preset programs. (HxWxD) 840*546*670mm; 152.20 kg plus rotor. PDF User Manual. Includes TX-750 oscillating rotor (75003607) of 4 x 1000 ml and maximum speed of 4,700 rpm. (4.301 xg) Acceleration and braking time 65/50 s. - Precooling with direct button. - Maintenance-free induction motor. - Automatic rotor locking system with button. - Microprocessor control. - Internal memory that saves the most recent data. - RCF selection. - Temperature and pre-temperature control. - 9 acceleration curves and 10 braking curves. - Automatic rotor recognition - Recognition of electronic imbalance. - Auto-Lock® III rotor system allowing installation and exchange of rotors with the push of a button. - Automatic lid closure and locking. - Digital display. The Thermo Multifuge X3 FR refrigerated centrifuge is high-quality laboratory equipment that offers exceptional performance. Designed to meet the needs of scientists and research professionals, this centrifuge features a 4 x 1000 ml TX-750 (75003607) swing rotor, allowing large sample volumes to be processed efficiently. Thanks to its advanced cooling system, this centrifuge ensures a constant and precise temperature during the centrifugation process, which is especially important to preserve the integrity of heat-sensitive samples. Additionally, its ergonomic design and intuitive interface make it easy to use and allow for hassle-free operation. Thermo Multifuge X3 FR offers a wide range of functions and features, such as the ability to program different spin profiles, adjust spin speed and time, and select between different acceleration and deceleration modes. In addition, it has a high-resolution LCD screen that clearly displays centrifugation parameters and allows real-time monitoring. It has four with lockable wheels. With its ability to process up to 4 1000 mL tubes simultaneously, this centrifuge is ideal for high-demand applications such as separation of cellular components, protein purification, and sample preparation for molecular analysis. Its robust and durable construction ensures long life and reliable performance. 17 optional rotors In short, the Thermo Multifuge X3 FR refrigerated centrifuge is an indispensable tool in any laboratory that requires efficient and reliable centrifugation. With its high-capacity oscillating rotor and advanced cooling system, this centrifuge delivers exceptional performance and ensures the integrity of heat-sensitive samples. Its ergonomic design and intuitive interface make it easy to use, while its wide range of functions makes it a versatile choice for a variety of research applications.

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

IKA PETTE MicroKit B Vario: 0.1-2 ul, 2-20 ul, 20-200 ul, Linea Stand, Tip xs box, Tip s box Design  (more)Air Displacement Piston Operated Pipette Volume Variable Number of Channels 1 Channel Features - Mechanical air-cushion pipettes manufactured in Germany - Fully automated calibration by robots - Volume-locking feature to prevent any accidental volume changes - Large and clearly visible display - Ergonomic and lightweight pipette with low pipetting and tip ejection forces to reduce strain and fatigue - Durable and robust construction using high quality UV resistant and chemical resistant materials - Fully autoclavable to ensure sterility and compliance to stringent laboratory standards - Maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance The IKA PETTE MicroKit B Vario features mechanical air-cushion pipettes with variable volume ranges of 0.1-2 µl, 2-20 µl, and 20-200 µl, all manufactured in Germany. These pipettes undergo fully automated calibration by robots and include a volume-locking feature to prevent accidental volume changes. The large, clearly visible display and ergonomic, lightweight design ensure low pipetting and tip ejection forces, reducing strain and fatigue. Constructed with high-quality UV and chemical-resistant materials, these pipettes are durable, robust, and fully autoclavable, ensuring sterility and compliance with stringent laboratory standards. The kit includes a Linea Stand, Tip xs box, and Tip s box, offering maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance.INCLUDED: The IKA PETTE MicroKit B Vario: 0.1-2 ul, 2-20 ul, 20-200 ul, Linea Stand, Tip xs box, Tip s box includes: - IKA PETTE vario 0.1-2 µl - IKA PETTE vario 2-20 µl - IKA PETTE vario 20-200 µl - IKA Linea - Tip s box (96 tips) - Tip xs box (96 tips) - Two Year Manufacturer's Warranty