Thermo Scientific Fiberlite 12x 010-0167 50ml to 30ml adapter

Manufacturer: Cohesive Technologies Model: TurboFlow HPLC Cyclone P 0,5 x 50 mm P/N: 952707 S/N: 618 (more)029 Description: TurboFlow HPLC Cyclone P 0.5 x 50 mm. Items delivered: - Cohesive Technologies TurboFlow HPLC Cyclone P 0.5 x 50 mm Condition: The column is in new condition, fully functional and ready for you to use.

Labconco 9000720 WaterPro PS/UF Life Science Model Polishing Station, 115V, 60Hz Features - Timed  (more)dispense for unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000720 WaterPro PS/UF Life Science Model Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark Analog Hotplate Benchmark hotplates feature an exceptionally durable, chemical resistant w (more)hite ceramic work surface. Their space-efficient design (8 x 9 in. footprint), makes them ideal for use on crowded benchtops and inside of bio-hoods. Advanced microprocessor controls with convenient turn knobs allow quick, precise adjustment and maintenance of temperature. Safety indicator LED’s on the front panel indicate when the heating function has been activated. With a square 7.1 in work surface, this hotplate is compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles and other vessels. INCLUDED: The Benchmark Analog Hotplate, 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Ci3000+ Weather-Ometer with its advanced digital control systems, represent monumental achieveme (more)nts in applying digital and optical technologies in easy-to-use laboratory weathering instrument. The 3000 Series is approved by many OEMs in the textiles, paints & coatings and plastics industries as the exclusive platform to deliver accurate, reproducible and repeatable results for predicting service life. The 3000 Series has been certified CE, UL, CSA, ISO and EN compliant. 4500 W water-cooled xenon arc lamp Total exposure area of 2,188 cm2 TFT full color 12″ touch screen control panel display of all test parameters Direct setting and control of Black Panel Temperature, uninsulated (BPT) or insulated (BST) Direct setting and control of relative humidity Direct setting and control of specimen chamber air temperature Display of diagnostic messages 14 factory pre-programmed test methods Space for 12 custom programs, sub-cycle capability SmartDamper to reduce test variability in chamber temperature and humidity and compensates for changes in ambient lab conditions SmartLight Monitor verifies that correct light capsule is installed Chamber viewing window in door Meets CE, UL, ISO EN and CSA safety requirements Automatic test countdown based on time or radiant exposure VibraSonic Humidification System Calibrated xenon reference lamp Water purity indicator Standards: AATCC TM16-2004: Colorfastness to Light AATCC TM 16.3 (2014): Colorfastness to Light, Xenon-Arc AATCC TM169: Weather Resistance of Textiles: Xenon Lamp Exposure ASTM C1442: Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus ASTM D2565: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications ASTM D3424: Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter ASTM D4303: Standard Test Methods for Lightfastness of Pigments Used in Artist Paints ASTM D4355: Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water ASTM D4459: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications ASTM D4798: Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method) ASTM D5071: Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus ASTM D6551: Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus ASTM D6695: Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings ASTM D7869: Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings ASTM D904: Standard Practice for Exposure of Adhesive Specimens to Artificial Light ASTM G151: Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources ASTM G155: Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials GME 60292: Designation of Colour Fastness and Resistance to Artificial Light IEC 60068-2-5: Environmental testing – Part 2-5: Tests – Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering ISO 105-B02: Textiles – Tests for colour fastness – Part B02: Colour fastness to artificial light: Xenon arc fading lamp test ISO 105-B04: Textiles – Tests for colour fastness – Part B04: Colour fastness to weathering: Xenon arc test ISO 105-B07: Textiles – Tests for Colour Fastness – Part B07: Colour Fastness to Light of Textiles Wetted with Artificial Perspiration ISO 105-B10: Textiles – Tests for colour fastness – Part B10: Artificial weathering – Exposure to filtered xenon-arc radiation ISO 12040: Graphic technology – Prints and printing inks – Assessment of light fastness using filtered xenon arc light ISO 16474-1: Paints and varnishes – Methods of exposure to laboratory light sources – Part 1: General guidance ISO 16474-2: Paints and varnishes – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps ISO 18909: Photography – Processed photographic colour films and paper prints – Methods for measuring image stability ISO 18930: Imaging materials – Pictorial colour reflection prints – Methods for evaluating image stability under outdoor conditions ISO 18937: Imaging materials – Photographic reflection prints – Methods for measuring indoor light stability ISO 3917: Road vehicles – Safety glazing materials – Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering ISO 4892-1: Plastics – Methods of exposure to laboratory light sources – Part 1: General guidance ISO 4892-2: Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc sources JASO M346: Light-exposure test method by xenon-arc lamp for automotive interior part MIL-STD 810F: Environmental engineering considerations and laboratory tests – Part 2: Laboratory test methods – 505.4: Solar radiation (Sunshine) Peugeot Citroen (PSA) D47 1431: Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures SAE J2412: Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus SAE J2527: Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus VDA 75202: Automotive interior materials – Colorfastness and ageing test against light at high temperatures: Xenon arc VW PV 1303: Non-metallic materials – Lightfastness test for interior parts VW PV 3929: Non-Metallic Materials – Weather Ageing in Dry, Hot Climate VW PV 3930: Non-Metallic Materials – Weathering in Moist, Hot Climate

Analog Dynamic Range: >140 dB (<2Hz) typical Input Signal Range: 18 mV to +1.0 Volt Input Noise: 40  (more)nV RMS typical (Max. 150 nV RMS) 15 Hz Bandwidth Resolution: 24 Bit Common-mode Rejection: 140 dB min., dc to 100Hz Data Acquisition Rate: 0.1 to 100 Hz Monotonicity: 24 Bits, 0.004% FS typical Power: 115/230 VAC 50-60 Hz 135 Watts Dimensions (H x D x W): 104 x 285 x 325 mm

Manufacturer: Eppendorf, Germany Model: F45-12-11 Fixed-angle rotor for 12 x 1.5/2 ml Description: F (more)or 1.5/2.0 ml tubesMaximum rotational speed: 13,4000 rpm Rotor and adapters are autoclavable (121°C, 20 min) For the following centrifuges: - MiniSpin 5452- MiniSpin Plus 5453

Quality, reliable and affordable incubators. Additional technical features: - Powerful and fast refr (more)igeration system - Working temperature from 0°C to 100°C - External structure in oven-painted steel sheet - with antacid epoxy powder - Forced ventilation - Internal chamber completely in stainless steel - Second door in tempered glass - Display resolution 0.1 - RS-485 output - Data management software, cable and USB adapter as standard - Sterilization cycle (160°C for 2.5 hours) Uniformity of temperatures: - at 4°C: 0.7°C - at 37°C: 0.5°C - at 60°C: 1.0°C Temperature stability at: - at 37°C: 0.2°C Time to reach temperature: - at 37°C: 5 minutes - at 44°C: 6 minutes - at 60°C: 6 minutes Quality materials: - External structure in steel sheet painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel - Internal door in tempered glass

Cable with jack for plugging to a car lighter 12V (PUE C315). Standard cable length: 1.7 m Compatibl (more)e with: Scales with PUE C315 terminal PUE C315 terminal

IKA Oven 125 Basic Drying Oven Heat Output 1500 W Working Temperature room temp. +5 - 250 °C Opera (more)ting Area Inner chamber 550 x 525 x 450 mm Features - Temperature range: RT + 5°C to 250°C - Capacity: 125 l - Electronically adjustable ventilation - Clear display and control menu - Key lock function - Timer - Adjustable temperature limit Universal oven for tempering, drying, aging and heatingapplication in the laboratory. The IKA OVEN 125 basic dry covers applications in industry, schools /universities, research, quality control and science. Fast heat up times and a precise temperature control guarantee reproducibletest results. A special odorless insulation also ensures lower operating costs. The oven can be controlled by USB and test parameters can be recorded forfurther analyses. INCLUDED: The IKA Oven 125 Basic Drying Oven includes: - IKA Oven 125 basic dry - Wire grid tray, chrome plated (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Basic Drying Oven Specifications Heat output1500 WWorking temperatureroom temp. +5 - 250 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature display yesTimer yesTimer display 7 segment LEDTime setting range1 - 144000 minNumber of trays max.6Load for one tray max.30 kgOperating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight74 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20USB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1550 WPower input standby1 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Benchmark BenchWaver 3D Rocker Speed Variable, 2 to 30 RPM Tilt Angle Variable, 0° to 30° Platform (more) 12 x 12 in Features - 3D "undulating" motion for molecular biology. - Adjustable tilt angle from 0 to 10°. - Speed control from 5 to 105 rpm on LCD. - Variable tilt and speed for versatile use. - Timed operation from 1 min to 99 hours. - Large 13.5 x 13 inch non-slip platform. - Optional stack platform for more capacity. Your browser does not support the video tag. The BenchWaver combines the basic rocking motion of traditional platform rockers with the circular motion of an orbital shaker. This combination is ideal for generating the optimum 3-dimensional “undulating” motion commonly preferred for molecular biology applications. The tilt angle is instantly adjustable (no tools or disassembly required) from 0 to 10° and the mixing speed can be adjusted from 5 to 105 rpm, using the large, user-friendly LCD control panel. Combined control of both parameters (tilt and speed) makes the BenchWaver a versatile workhorse that can provide anything from gentle, slow moving waves to a rapid, more vigorous motion. Additionally, time of operation can be selected from1 minute up to 99 hours or for continuous operation. The large 13.5 x 13 inch platform is supplied complete with a non-slip, rubber mat. An optional stacking platform is available for users requiring additional mixing capacity. BenchWaver is a reliable and versatile instrument and can be used in refrigerated or incubated. Click Here to View Product Video INCLUDED: The Benchmark BenchWaver 3D Rocker includes: - 13.5 x 13 inch Platform w/ Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hettich 2 place swing out centrifuge rotor for 320/320R Centrifuge.

Dimensions (WxD): 1500 x 600 mm