Thermo Heraeus Centri-Lab CentriLab Adapter Red Rot 16x Set of 4

Flow rate: 0.1 to 50 mL/min Maximum operating pressure: 1 MPa Tubing ID (flow path): 0.75 mm Single  (more)wavelength detection: Mercury lamp and 254 and 280 nm filters included Flow path length: 2 mm Buffer selection: 2 inlets pH stability long term: 2 to 12 Viscosity: Max 10 cP (<10mL/min), max 5 cP (>10mL/min) Dimensions (WxHxD): 400 x 530 x 250 mm

Scilogex DS-160/T7 Saw-tooth Generator ProbeThe Scilogex DS-160/T7 Saw-tooth Generator Probe is for  (more)use with D160 Homogenizer and has a diameter of 7mm x 130mm. The Scilogex DS-160/T7 is for tissue and can hold volumes 1-50mL.INCLUDED: The Scilogex DS-160/T7 Saw-tooth Generator Probe includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Acid SystemVacuum Concentrator: Acid-Resistant benchtop type with glass lid B (more)rushed stainless steel and glacier white, powder-coated steel exterior with blue accents 300w heater with heat from OFF to HI (100C) in one degree increments and heat time from 1 to 999 minutes PTFE-coated chamber with Hastelloy shaft Cold Trap: HCFC/CFC-free refrigeration system with 1/3 hp compressor lowers cold trap to -50C Temperature graph that illuminates green when the collector coil reaches operating temperature INCLUDED: The Labconco 7983013 CentriVap Acid System, 115V, 60Hz includes: - Acid-Resistant Benchtop Vacuum Concentrator - Cold Trap -50°C - Clear Canister 7460900 - Acid Insert 7814800 - 12-13 mm Acid-Resistant Rotor 7455101 - Glass Trap 7397605 - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

System consisting of: Gilson GX-281 sample robot 2 Gilson 6 position valves 2 Gilson 306 pump Gilson (more) 322 pump

Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order when heated to 36ºc, when set to 100ºc item would not climb beyond 60ºc. The shaking plate and Rotisserie shaker are both in good working order. It is in reasonably good cosmetic condition with surface damage present.

This Leica ATC 2000 Compound Microscope was removed from a university lab where it was surplus to re (more)quirements. The unit powers on and is in good cosmetic condition. The Lamp and stage are operational. We tested it with a slide and it is fully working. Included with it are 3 x Objectives; 1 x Red Leica 438 Achro 4/0.1 ∞ /0.17 1 x Yellow Leica 439 Achro 10/0.25 ∞/0.17 1 x Blue Leica 440 Achro 40/0.66 ∞/0.17 2x EyepiecesLeitz Wetzlar Germany Periplan GF 12.5x

Beckman Coulter BioMek FXP Laboratory Automation Workstation System This system was removed from a u (more)niversity where it was surplus to requirement. It is in good cosmetic condition and powers on, although due to the following error; "D1 axis error:pump failed to send boot request. (0512)."we are unable to test it further, and it is listed as Spares/Repair. We suspect the tip loader is faulty. This error prevents the system from connecting to the software. This system also includes the following: - Beckman Coulter Accuframe - Thomas 669BESUU44TFE Pump - BioTek Valve Module - All relevant manuals and guides - Sami WorkStation EX Software 4.0 - Software setup guide - 2 x 96 well tip holders with all tips present - 2 x light curtain test rods - Filter regulator NAW2000-N02D-C - 2 x boxes of spare parts and replacement parts - 9 x bottles - pipes and connectors for bottles - PC + Monitor - Keyboard - Microscan MS3

IKA HS 501 digital reciprocating shaker. Adjustable speed from 0 to 300 min-1. Orbit: 30mm. Maximum  (more)load: 15 Kg. Timer from 0 to 56 min. Includes two holding brackets. The HS 501 digital shaker accepts a maximum of 50 25mL flasks, 48 50mL flasks, 25 100mL flasks, 16 250mL flasks or 12 500mL flasks. Dimensions: 505x585x120mm. User manual. The IKA HS 501 digital reciprocating shakers have a large support surface and digital display. Continuous operation even with extreme loads. Ideal for all types of containers such as settling funnels and for applications such as extractions. Wide variety of optional supports to hold different containers.

Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V Temperature Range 0° (more)C (at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1060L (37.4 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP1060ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP1060ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP1060ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software &amp; AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty