Sysmex UF-1000i Urine Analyzer

The Invitrogen Tali Image-Based Cytometer is a 3-channel (bright field, green fluorescence, red fluo (more)rescence) imaging platform that performs suspension cell–based assays right from the benchtop. With the Tali cytometer, three-parameter population analysis can be completed in approximately 1 minute per sample using 25 μL sample volumes. In addition to the bright field channel, the Tali Image-Based Cytometer features two fluorescent channels (green and red), enabling it to simultaneously count green or red fluorescent stains, as well as cells expressing GFP and RFP. The Tali also offers an intuitive user interface, provides the option to save data and generate a report, which can then be transferred to a PC using the USB drive. Other features include presenting comprehensive data with graphic reports and allowing the export of data as .csv (comma separated value), .jpg, .fcs, and .pdf files for archiving and sample comparisons. Processing time: 10 seconds to 2 minutes, depending on the number of fields captured Sample concentration range: 1 x 105 – 1 x 107 cells/mL Particle/cell diameter range: 5 – 60 µm Required sample volume: 25 µL Optics: 3 channels (bright field, green fluorescence, red fluorescence) Excitation: Green channel LED (458 ± 20 nm), Red channel LED (530 ± 20 nm) Green channel filter: 466/40 EX, 495 LP Di, 525/50 EM Red channel filter: 543/22 EX, 580 LP Di, 585 LP EM Camera: 1.3 Mega pixels, 4x objective, 4x or 16x digital zoom Dimensions (WxDxH): 290 x 450 x 290 mm Weight: 9 kg

Ethernet cable with angle connector: scale (HRP, MWSH, MWLH) – terminal (HY10, PUE5). Cable le (more)ngth: 5 m Compatible with: HRP platform MWSH weighing module MWLH weighing module

Scilogex Block, used for 1.5mL tubes, 24 holesThe Scilogex 1.5mL Block accomodates 24 x 1.5mL tubes  (more)with a diameter of 10.9mm and 31mm depth. INCLUDED: The Scilogex 1.5mL Block includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco 9000521 WaterPro PS Pistol Polishing Station, 115V, 60HzFeatures - Timed dispense for unat (more)tended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Dispensing gun for additional flexability - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000521 WaterPro PS Pistol Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf 1 x 75ml Adapters for 100ml Buckets, Cat. # 022637703 New in box Eppendorf 1 x 75ml Adapte (more)rs for Rectangular 100ml Buckets, Cat. # 022637703. For use with 5804/R and 5810/R centrifuges. This is a two piece set, and the adapters are new in packaging. The Eppendorf 1x 75ml Adapters for 100ml Buckets, Cat. # 022637703 are discounted, brand-new,and includes a 6 Month Full Parts and Labor Warranty.

Boekel Scientific 14792 Round Tissue Bath, 115V The Boekel Scientific Round Tissue Flotation Bath ha (more)s a black ceramic coated basin and a wide rim for drying microscope slides. The unit has analog control with a heating light indicator and an on/off switch. Supplied with dust cover, thermometer holder and non-skid rubber feet. Made in the USA. Features: •Edges serve as a convenient drying surface for processed slides •Bath surface is black ceramic coated steel for improved visibility of tissue sections •Supplied with dust cover, thermometer holder and non-skid rubber feet •Equipped with on/off switch, pilot light, and thermostat •Durable and inexpensive •Rapid heat-up •Easy to clean and maintain INCLUDED: The Boekel Scientific 14792 Round Tissue Bath, 115V includes: - Dust Cover - Thermometer Holder - Non-skid Rubber Feet - Power Cord - Operator's Guide - Manufacturer's Documentation Boekel Scientific 14792 Round Tissue Bath, 115V Technical SpecificationsCatalog Number:14792, 14792-2Temperature Range:35°C to 65°CCapacity:1 LShipping Weight:3.2 kg (7 lbs.)Chamber Dimensions in/cm:8 1/4 dia x 2" D 21 cm x 5.1 cmProduct Dimensions W x D x H in/cm:11 D x 3 3/4 H 27.9 cm x 9.2 cmElectrical:14792 115 VAC 50/60Hz 190WComparison of ModelsSpecification145702 Illuminated Tissue Bath145951 Illuminated Tissue Bath w/ Dryer & Orienter14792 Round Tissue BathTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°C35°C to 65°CTemperature Accuracy±1°C±1°C at 55°CN/AStability±1°C±1°CN/AOverall Dimensions (W x L x H)36.2 x 36.2 x 11.4 cm (14.25 x 14.25 x 4.5 in)36.2 x 36.2 x 11.4 cm (14.25 x 14.25 x 4.5 in)27.9 cm D x 9.2 cm H (11" D x 3 3/4" H)Shipping Weight12 lbs (5.44 kg)12 lbs (5.4 kg)7 lbs (3.2 kg)Electrical115 VAC 50/60 Hz 272 W UL and CSA Certified115 VAC 50/60 Hz 272 W UL and CSA Certified115 VAC 50/60Hz 190W.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

This listing is for 1 of 2 VWR 2KG Weight.The unit is in full working condition and is ready for imm (more)ediate release.The VWR® Calibration Weights are meticulously crafted from high-grade stainless steel to ensure long-lasting durability and reliable performance. Designed for use in various precision weighing applications, these weights are ideal for laboratory, industrial, and calibration purposes. They feature a cylindrical shape with a knob for easy handling and come in OIML Class E2, F1, or F2 options to meet diverse accuracy requirements.Each weight comes in a protective plastic storage case, ensuring safe storage and handling. For quality assurance, you have the option to include a Statement of Accuracy or an ISO 17025:2017 Certificate of Calibration. The ISO certification guarantees full traceability, providing critical information such as the date of manufacture, serial number, nominal mass, conventional mass, and uncertainty of measurement.Key Features:High-Grade Stainless Steel Construction: Ensures long-lasting durability and resistance to wear and corrosion.Plastic Storage Case: Provides secure and safe storage for each calibration weight.OIML Classification: Available in E2, F1, or F2 classes, offering precision options for various applications.Cylindrical Shape with Knob: Ergonomically designed for easy handling.High Polish Finish: Offers a smooth, polished surface and low magnetic permeability for precision applications.Optional Certification: Available with either a Statement of Accuracy or an ISO 17025:2017 Certificate of Calibration, ensuring traceable calibration and compliance with industry standards.

Manufacturer: VWR Model: Micro Star 1.7 Pico Centrifuge + 24x 1.5/2mL Description: Ideal for everyda (more)y laboratory use, the Thermo Scientific Pico 17 microcentrifuges offer excellent processing performance, unique safety features and a wide range of microcentrifuge rotors and accessories for microcentrifuge tube processing. Core features: - 24-position rotor can be used for all 1.5 to 2.0 ml tubes, including mini-preps and centrifuge columns - Unique ClickSeal® rotor lid with bio-seal audibly clicks into place; one-click opening for faster removal compared to screw caps - Transparent PPSU lids have improved strength and chemical resistance compared to polycarbonate/metal lids and provide visibility of samples for increased safety and convenience - Intuitive controls and easy-to-read display simplify operation Technical data: Max. Capacity: 24×1.5/2.0 ml Max. speed: 13300 min-¹ Max. RZB: 17000 ×g Start/stop time: 12/12 s Timer: 1 - 99 min (in steps of 1 min) + hold Noise level: 56 dB(A) Power supply: 230 V 50/60 Hz W×D×H: 243×352×225 mm Weight: 11 kg Included in delivery: - Micro Star 1.7 Pico Centrifuge + 24x 1.5/2mL - Operating instructions as PDF via e-mail The device is in absolute top condition and has been 100% tested for function.

DW Scientific Whitley Automated Spiral Plater with Whitley Vacuum Source (WASP) This system was remo (more)ved from a university lab where it was surplus to requirements. The unit powered up and read “System Error”. Therefore, it is listed as Spares or Repairs. Includes the following: 1x DW Scientific Whitley Automatic Spiral Plater with Whitley Vacuum SourceS/N: WA03DB 1x DW Scientific Whitley Vacuum SourceS/N: NV06CM

Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1060L (37.4 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP1060eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP1060eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP1060eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Labconco FreeZone 6L -84C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collecto (more)rFeatures - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers with Stoppering TrayDryers are designed for lyophilizing moderate to large loads and stopperingvials or serum bottles under vacuum. The console features a front viewingwindow and interior space for a vacuum pump (sold separately). The console'supright stainless steel collector coil holds 6 liters of ice before defrosting.Two 1/3 hp HCFC/CFC-free refrigeration systems cool the collector to -84C(-119F), suitable for low eutectic point samples including acetonitrile. TheStoppering Tray Dryer features three 16.5" x 12" processing shelves.A single 1 hp HCFC/CFC-free refrigeration system and 1000-watt electric heatercool and heat the fluid medium circulating through channels in the shelves.Lyo-Works™ OS provides a real time display of freeze dryer and tray dryerparameters on a 5" full color, capacitive touch screen. Models with PTFE-coatedcollectors that can withstand corrosive compounds are available. Features Upright stainless steel collector coil holds 6L of ice before defrosting Environmentally-friendly HCFC/CFC-free refrigeration system cools the collector to -84C (-119°F) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. The console provides interior space for vacuum pump (sold separately) Lyo-Works OS provides real time display of collector temperature and vacuum level Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time FreeZone™ exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors provide up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C INCLUDED: The Labconco 710622000 FreeZone 6L -84C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty