Siemens Sitrans LR250 7ML5431-0AC20-1AA0

Mettler Waagen Windschutz Balance Wind Shiled Glass Housing Schutzgehäude PB

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€250.00 ex VAT

€297.50 incl. VAT if applicable

Agilent Needle holder, flanged / G1946-20174

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€130.00 ex VAT

€154.70 incl. VAT if applicable

Gestigkeit SD 7 Sand Bath

Temperature range: Ambient +5°C to 370°C Dimensions (WxDxH): 358 x 358 x 220 mm Hotplate: 360 x 360 (more)mm Weight: 13 kg

€750.00 ex VAT

Heidolph Overflow Sensor for Condensate / Residue Vessels

Unused demo product in original packaging. Stupendous condition. 12 months warranty. For rotary evap (more)orators

D20-S25C-P-R25C Velp dispersion tool

Samples and applications - Homogenization of foods (smoothies, homogenized foods, drinks) and prepar (more)ation of stuffings for food (e.g., meat, vegetables) - Homogenization/crushing of tablets - Homogenization of tobacco leaves - Preparation of ceramics and ceramic paste - Processing of textile fibers TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-10 µm - Ultimate fineness, suspensions: 15-50 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

€951.00 ex VAT

€1,131.69 incl. VAT if applicable

Italy

Stuart Cole Parmer SSL1 SSL2 Rocker Shaker Flask Holder Assembly Platform

People are watching right now:

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€150.00 ex VAT

€178.50 incl. VAT if applicable

scanning electron microscopes

Brandel PXR-96-MS Programmable Plate Liquid Dispensing System 96 Well 10-999 µl

Manufacturer: Brandel, USA Model: PXR-96-MS Programmable Plate Dispensing System Description: Brande (more)l's Micro Dispensing Systems offer high efficiency, repeatable accuracy and maximum flexibility – at a cost far below most dispensers currently on the market.MicroDispensers consist of a Dispensing Unit and a separate, Pump/Controller with keypad. Dispensers can also be operated by remote computer using the Controller's built-in RS232 port. PXR - For dispensing viscous solutions such as scintillation cocktail Specifications/Features: Delivers user defined volumes between 10 and 999 µl ±5% relation to calibration with ±3% repeatability Configuration for 96-well plates Operations are menu driven. Simply enter the volume you wish to deliver and set pump dial to dispense. Critical components are made of Teflon, stainless steel or Teflon-coated aluminum to resist corrosion. MicroDispenser and Pump/Controller occupy less than 18 x 18. in. of bench space Dispensing manifolds can be easily interchanged. Liquids of similar viscosity can be used in the same MicroDispenser. Reversible pump clears the system and saves solution. Dispenser can be operated remotely, through an RS232 port, or from controller keypad. Self-priming delivery manifold, Teflon delivery tubing Digital speed control Power Supply 220V MicroDispensers include one-year warranty and full factory support. Custom configurations for 6, 12, 24, 48-well plates and others upon request. Items delivered: - Pump Control Unit- PXR-96 MS Dispensing Unit- Power Cord- Underlay base for liquid safety (not pictured) The System is in very good cosmetic condition (just 1-2 scratches on top) and all tubes are very clean (as it's to see on the photos).It's 100% functional tested!Ready for your use!

€1,500.00 ex VAT

€1,785.00 incl. VAT if applicable

Agilent G1313-87301 Capillary stainless steel 0.25 x 160 mm S/SH ps/ps

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€50.00 ex VAT

€59.50 incl. VAT if applicable

Bruker LC-NMR-MS Interface

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis. The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

€1,499.00 ex VAT

Hawo HPL 450 A Impulse Bar Sealer

nmr spectrometers

The impulse bar sealer hpl 450 A seals any type of thermoplastic (as well as compostable and biodegr (more)adable materials such as ORGANIXprotect) plastic film and aluminium laminate film. The sealing and cooling time can be set separately and the film length can easily be adapted to the item being packaged. Thanks to the impulse process, the device is very cost-effective since it only draws power when it is being used. A standard 3 mm wide sealing seam, consistent contact pressure thanks to an integrated interlock magnet and constant temperature distribution over both sealing bars ensure a fast and reliable sealing process. The simple operation is effected via a footswitch.

€199.00 ex VAT

Invitrogen Qubit Flex Fluorometer

The Qubit Flex Fluorometer is a benchtop fluorometer designed for highly accurate quantification of (more)DNA, RNA, microRNA, and protein. With the Qubit Flex Fluorometer you have the flexibility to directly measure fluorescence of up to eight samples simultaneously, which reduces assay variability. Paired with Qubit reagents, the Qubit Flex Fluorometer is part of an optimized workflow generating highly accurate and reproducible results. The fluorometer has a large screen and intuitive user interface, making it easy to select and run your desired assay with results displayed in just a few seconds. Sample Volume: 1 to 20 μL Excitation Wavelength: Blue LED (max 460 – 480 nm), Red LED (max 620 – 640 nm)

€2,499.00 ex VAT