Set of 4 Cell Micro Controls MAN81 Manifold 8 to 1 NEW, Sealed

Heidolph Hei-VAP Core HL/G3 Non Coated Hand Lift w/ G3 Vertical Glassware Features - Clear digital d (more)isplay showing actual and set values - Two separete knobs with dynamic control for setting the rotation speed and heating bath - Accidental changing of the values can be prevented by the lock function - Intuitive LED ring light system makes activated functions clearly visible even from a distance - Easy adjustment of the immersion depth up to 160 mm and the inclination angle from 20° to 80° - Standby function and residual heat warning at heating bath temperatures above 50°C - Available as hand or motor lift models - The standby button stops all functions and, when using a motor lift model, lifts the evaporation flask from the heating bath Temperature of the water bath can be easily controlled by utilizing the right knob on the interface controller. Heating bath temperature can be set from 20 to 210 degrees Celsius. (oil) Heating bath can be easily removed from the system base and contents can be disposed of with ease. Rotation speed of the evaporation flaskcan be easily controlled by utilizing the left knob on the interface controller. Rotational speed can be set from 10 to 280 rotations per minute. .features-side.third img{height:unset;} The Hei-VAP Series of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. The PTFE vacuum seals are highly resistant and can achieve maximum tightness and reduce expensive spare parts. The 210℃ universal heating bath is suitable for all flasks up to 5 liters. Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm. Corrosion free die cast housing features condensation repellent varnish. The Heidolph Hei-VAP Core features an operating concept that is focused on the essentials: clear and with access to the basic parameters rotation speed and heating bath temperature at any time. Two separate knobs with dynamic control for setting the rotation speed and heating bath temperature: fast turning for large jumps, slow turning for precise setting of the set values. The Intuitive LED ring light system makes activated functions clearly visible even from a distance. Features: - Digital display - Direct access to rotation and heating bath temperature - Lock function - Standby button - Residual heat warning Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Core HL/G3 Non Coated Hand Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3 Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Julabo MAGIO MS-600F Refrigerated Circulator, 115V/60Hz Working Temperature Range -35°C to 200°C Co (more)oling Capacity 600W at 20°C Refrigerant R449A Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in drain tap The MAGIO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations offer low temperature capabilities from -30°C to -50°C with an upper temperature limit of 200°C. The MAGIO™ MS circulator incorporates easy operation via a large color TFT touchscreen. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A multilingual interface, integrated programmer, Pt100 port for external temperature control, RS232/RS485, USB and Ethernet connections for external PC control and data-logging. Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pressure/suction pump capacity of 16-31 L/min with pressure to 3.4-13.3 psi. Stainless steel bath tanks with integrated drain port. 115V version with 1 kW heating power; 230V version with 2 kW heating power. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MS-600F Refrigerated Circulator, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Vinitex Door cabinet high LT White 600

The KR-01 converter is designed to adjust the RS 232 and RS 485 signals. It is intended for balances (more) and scales with RS 232 port (DB9/M connector) operating in weighing systems. The device automatically detects data transfer direction. Its interfaces, RS 232 and RS 485, are galvanically separated. The converter features 1.7-meter-long RS 232 cable with DB9/F plug, 1-meter-long, two-wire RS 485 cable, a plastic housing and a power supply permanently connected to the converter with 1.8-meter-long cable.

Lancer 820 LX Undercounter Laboratory Washer and Dryer This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks. Internal dimensions - D51 W52 H52cm

This was removed from a university lab where it was surplus to requirements. The cabinet was purchas (more)ed in 2011 but we are told it was never used. The run hours of 53 reflect this. It is in excellent cosmetic condition and in full working order. Inner compartment 200 x 110 x 115cm

Leica Leitz DMRB Trinocular Fluorescence Microscope Lab This item was removed from a university wher (more)e it was surplus to requirement. It is in good cosmetic condition and working order; however, one noticeable flaw is the missing paint on the top of the unit. This does not affect its functionality. This microscope was tested with an in-house objective. (not included in sale) Features the following: 1 x Leica Leitz DMRB Trinocular Fluorescence Microscope body.Type 301-371.010.Fitted with the following filter cubes:- I3 513808 - For Blue Excitation. - B/G/R 513836 - For DAPF/FITC/TEXAS RED Excitation. - TX 513802 - For FITC Excitation. - A 513804 - For UV Excitation. 1 x Leica 12volt 100watt Halogen lamp.Type 307-155.001. 1 x Leica 501049 Top swing condenser fitted with a Leica 501000 0.90 S1 Lens. 1 x Leica mechanical stage with specimen holder. 2 x Leica L Plan 10x 25 eyepieces. 1 x QImaging Firewire Camera.01-RET-2000R-F-CLR-12-CCooled Colour 12 Bit.

IKA C-Mag HS 7 Magnetic Hotplate Stirrer Speed Range 100 to 1,500 RPM Heating Temp. Range 50 to 50 (more)0°C Stirring Quantity Max. 10 l Features - Powerful motor for stirring quantities of up to 10 l (H2O) - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Exact temperature setting via digital display (LED) - Bushing according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-Mag HS 7 Magnetic Hotplate Stirrer features one stirring position with a maximum stirring quantity of 10 liters (H2O). It is equipped with a powerful motor with an output of 1.5 W and a speed range of 100 - 1500 rpm. The heat output is 1000 W, and it offers a heating temperature range from 50 to 500 °C. The set-up plate, made of chemical-resistant ceramic, measures 180 x 180 mm. The stirrer includes an LED temperature display for both set and actual values, a turning knob for heat control, and a fixed safety circuit of 550 °C. Additionally, it has a Hot Top indicator for safety and a bushing for connecting an external temperature sensor (ETS-D5). The dimensions are 220 x 105 x 335 mm, and it weighs 5 kg.

Ohaus VXMTDG Multi-Tube Vortex Mixer, 120V Speed Range 600 rpm to 2,500 rpm Maximum Capacity 4.5 kg  (more)Duty Rating Continuous Features - Easily process up to 50 samples at one time - the Multi-Tube Vortex Mixer can be customized for your application with six different tube racks and a post extension kit. - Configured with stainless steel housing to provide durability in heavy duty applications. - Wide speed range of 1,200 rpm to 2,400 rpm ensuring the VXMTALB meets a variety of application requirements. - Strong suction feet reduce motion and prevent sliding during operation. The Ohaus VXMTALB Multi-Tube Vortex Mixer, 120V is ideal for hands-free, high throughput sample processing. Includes stainless steel foam rack for 12mm tubes, and is compatible with interchangeable foam racks for vortexing of tubes from 10 to 29mm in diameter ensuing your laboratories varying vortexing requirements are met. INCLUDED: The Ohaus VXMTDG Multi-Tube Vortex Mixer, 120V includes: - Stainless steel foam rack for (50) 12 mm diameter tubes - Detachable 3-wire cord and plug - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Thermal Cycler C1000 Touch + Real-Time System CFX96 BIO-RAD Year of manufacture: 2020 Chassis : C100 (more)0 Touch Maximum ramp rate, °C/sec : 2.5 Average ramp rate, °C/sec : 2 Heating and cooling method : Peltier Lid, °C : Heats up to 105 Temperature Range, °C : 0–100 Accuracy, °C : ±0.2 of programmed target at 90°C Uniformity, °C : ±0.4 well-to-well within 10 sec of arrival at 90°C Gradient Operational range, °C : 30–100 Programmable span, °C : 1–24 Dimensions (W x D x H), cm/in : 33 x 46 x 36/13 x 18 x 14 Weight, kg/lb : 21/47 With CFX96 BIORAD for 96-well PCR plates In excellent condition Equipment tested