Schott H6180 + H6280 Electrode Elektrode pH Einstabmesskette

FLX-10-1061 fluidX XTT-96 Microtube Thawing Station, 100-240 V New equipment in its original packagi (more)ng For gentle but rapid thawing of sample storage tubes in 96-well format Damage to samples is minimized because room temperature air is forced over the cooled microtubes, direct heat is not applied Compatible with most rack tubes This compact design is capable of defrosting 96 rack tubes simultaneously

IKA DB 4.2 Round Bottom Tubes Dry Block (10 mm)

96-well acrylic manifold for proteins and nucleic acids: Dot-, spot- and slot-blot array systems. Co (more)mpatible with multi channel pipettes Tension on the clamping is adjustable, permitting use of a variety of blotting and filtration media The Minifold system consists of four basic components: Sample well plate, filter support plate, vacuum plenum and metal clamping plate. 96-well spot-blot system: Standard microplate format. Sample volumes as low as 25 μl can be applied, with very high signal intensity.

This device is used to neutralize static charges (ESD) present on surfaces or components. Features:  (more)Compact structure, light weight, portable design and angle adjustable. Quick static electricity neutralization. Large-range ion air zone. Speed-adjustable fan generates large-range air flow. Stable and adjustable ion balance. Leakage transformer equipped, long lifetime, short circuit prevention. Built-in ion emitter cleaner to facilitate cleaning. Ion balance: ≤ ± 10V Air volume: ≤ 2.4 m3/min Effective range: 400 – 1500 mm Ozone generating amount: Lower than 0.03 PPM (measured at 15 cm in front of the fan) Dimensions: 140 x 84 x 220 mm Weight: 2.6 kg

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PMV 50.5Y moisture analyzer is an advanced solution for measurement of moisture content of samples c (more)ontaining significant amount of moisture (up to 100%). The drying process is carried out by means of microwaves which enable to evenly heat the whole sample’s volume. The PMV 50.5Y, when compared to standard moisture analyzers, significantly shortens the drying time. The PMV 50.5Y microwave moisture analyzer can be successfully used wherever materials containing large amounts of water are dried. These materials are, for example, dairy products, fish, meat, fruit products, syrups, creams or liquid resin. The sample is placed in the drying chamber on a glass fibre filter. At the bottom of the chamber there is one end of the waveguide from where the microwaves are emitted. Upon process start, microwaves are equally distributed on the filter’s surface and dry the sample. The moisture content is determined on the basis of the mass loss obtained during drying. A respective drying program is selected depending on sample mass and its chemical composition. The average duration of this process depends on the type and mass of used substance, and takes 1 to 10 minutes. In contrast, drying using the traditional halogen moisture analyzer takes 5 to 40 minutes. The PMV 50.5Y microwave moisture analyzer is equipped with a temperature sensor and enables to monitor device power in order to prevent exceeding the boiling point during the process. A preset microwave power is displayed on the indicator throughout the drying procedure. The PMV 50.5Y’s main features: intended for drying of samples containing significant amount of moisture (up to 100%), ultra-short drying time when compared to traditional moisture analyzers and standard drying methods, microwave-based solution, uniform heating of entire sample’s surface, complex database of drying programs, finish mode: manual, automatic, time-defined, user-defined, advanced reports, time and statistical graphs, easy operation due to a touch screen. The PMV 50.5Y moisture analyzer is based on an advanced-class Y series system intended for laboratory balances. Expanded 16 GB memory enables saving and storing sophisticated reports and time and statistical graphs. Wireless communication improves ergonomics and operation safety. Wi-Fi® enables sending data between the moisture analyzer and a mobile device. Large 10’’ touch screen guarantees comfort of operation. Proximity sensors ensure touch-free access to user-specified operations. For each purchase of the PMV 50.5Y moisture analyzer the customer is supplied with: 60 glass fibre filters of ø90 mm, a sample of sodium chloride 10% ± 0,5% to determine correctness of the operation at the workstation, a service concerning determination of drying parameters for five customer-selected samples carried out by RADWAG employee. The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. * All trademarks and registered trademarks are the property of their respective owners. Terminal 5Y in Microwave Moisture Analyzer With the 5Y terminal, microwave moisture analyzer PMV gain new capabilities and functionalities, such as: 10-inch display, Digital Weighing Auditor (DWA), uncompromised user verification, Ambient Light, hotspot, RFID*, Live Note voice and text notes, voice commands for the device, measurement history within the Handy Library, widgets. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

SCILOGEX SCI120-S LED Digital Dry-Bath, Single-BlockThe SCILOGEX SCI120-S LED Digital Dry Bath is id (more)eal for molecular biology, histology, clinical, environmental and industrial laboratories, including melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in-situ hybridizations. With a low profile and space saving design, control of temperature and time is displayed in real-time with clear independent displays. Various high grade aluminum blocks are available for common tube sizes providing excellent temperature uniformity from ambient +5 to 120°C. Product Features - Easy-to-read LED displays - Continuous and timer functions - Real-time independent displays of temperature and time - Over temperature safety protection - Various high quality aluminum blocks (15 x 9.5 x 5cm) for common tube sizes, 0.2, 0.5, 1.5/2.0, 5/15, 50 mL - See through cover included INCLUDED: The SCILOGEX SCI120-S LED Digital Dry-Bath, Single-Block includes: - Block - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex DS-160/T14 Saw-tooth Generator Probe The Scilogex DS-160/T14 Saw-tooth Generator Probe is a (more) specialized tool designed for use with the Benchmark D160 Homogenizer, specifically for homogenizing samples in a volume range of 100 to 1000ml. With dimensions of 14mm x 130mm, this generator is a 14 mm saw tooth attachment that fits easily onto the homogenizer. The saw tooth design ensures efficient and thorough homogenization of samples, while the length of the generator allows for homogenization of larger sample volumes. INCLUDED: The Scilogex DS-160/T14 Saw-tooth Generator Probe includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty