S+B Plinth cabinet 5 drawer Ice blue 1200

AARIAC Clean Air CLR 20/30 S T UK Compressor Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit was installed in late 2023 and had not seen much use. Also included is the following: Nardi Compressor - Dryer 400Installed/Replaced - 23/11/23

Scilogex iFlow Motorized LCD Digital Bottle Top Dispenser, 0.1-99.9ml, 110-240V Volume Range 0.1 to (more) 99.9ml - 100ul resolution Max. piston capacity 10ml Volume increments 0.1ml Features - Two dispensing modes. Single volume dispensing to 99.9ml or multi-dispensing (from 0.2ml x 50 times, to 5ml x 2 times) - High quality stepper motor provides smooth and accurate dispensing - Aspirate and dispense speed is adjustable - Recirculation feature minimizes waste when priming - TFT display module for simple volume selection and control - Comes with corded remote control to start and stop dispensing - Comes with adjustable titrating nozzle with flexible length - 45mm plus included adapters (GL25, GL28, GL32, GL38 & S40mm) to fit all common lab bottles Scilogex iFlow Electronic Motorized Digital Bottletop Dispensers are ideal for safe, accurate and precise dispensing of bases, saline solutions, acids and some organic solvents. (Please check our chemical compatibility chart below for compatible liquids and permissible concentrations). Dispense from 0.01ml to 99.99ml (10ml piston capacity, so the piston will refill 10 times for the 99.99ml maximum volume) simply controlled by the TFT touch screen display module. Choose from either the fixed position dispense nozzle or the included adjustable dispensing nozzle with flexible tube. A recirculation feature minimizes waste when priming. A corded remote control is also included. The iFlow is totally portable and can be recharged in 4 hours providing approximately 5 hours usage. Alternatively the 110-240V multi-voltage power adapter can be used for uninterrupted use. INCLUDED: The Scilogex iFlow Motorized LCD Digital Bottle Top Dispenser, 0.1-99.9ml, 110-240V includes: - GL25, GL28, GL32, GL38 & S40mm Adapters - Adjustable Dispersing Nozzle - Corded Remote Control - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

IKA ICC basic IB R RO 15 ICC basic IB R RO 15 ecoIKA facilitates the configuration of your temperatu (more)re control system by offering “ready for connection“ packages with all necessary accessories.Circulating bath with 15 stirring positions for glass beakers up to 250 ml.INCLUDED: The IKA ICC basic IB R RO 15 includes: - Power Cord - Two Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

DWM HPE is a combination of a checkweigher system and a labelling system, designed for weighing and  (more)marking of products of variable weight. These parameters speak for themselves: Maximum capacity: 7,5 kg Readability [d]: 1 g Throughput: up to 60 pcs./min You See Everything Even From a Distance The device has been equipped with 12-inch, colour screen and a touch pannel. It can be programmed either using a terminal or remotely, with the Label Editor and E2R Checkweigher software run. Go for the solution which you find more convenient. And you design the labels from the Label Editor. Apply the Labels the Way You Like You can adjust the label application system to particular requirements of the production process of yours (application from the top, application from the side). To meet the most demanding requirements, we can apply tamp or blow label applicators mounted on the actuator or the rotary arm. Should you need to use metal detection and rejection systems, we can equip the device with them – its modular design allows that. You Want to Know What For You Need It? Well, the answer is this: mainly for industry. The DWM labelling checkweighers are intended for industry since it requires pre-packaged products of variable weight to be marked with labels including price. Our devices’ functions are as follows: Constant-weight product labelling, Variable-weight product labelling, Single/ bulk/ pallet label printing, Product sorting, Contamination check-ups, Weighed product record, Freely configurable report module. Plus, They Conform to Worldwide Standards The DWM labelling checkweighers have type approval accordant with MID directive and are tested in accordance with OIML R51 reccomendations. The software enables creation and printout of any labels, also those that include product price. Software Tools Label Editor R02 E2R Checkweigher

M1 Mass Standard - knob weights - set (1 g - 200 g), wooden box.

Ohaus ISTHBLHTS Heated Thermal Shaker The Ohaus ISTHBLHTS Thermal Shakers is designed for applicati (more)ons that require consistent and precise results. With heating and shaking capabilities. These shakers use interchangeable blocks to accommodate a wide variety of tubes and microplates. The easy-to-use, 4.3", color, LCD touch screen allows the user to save and visibly track progress through the live status bar for five user defined programs, each with five individual steps. The unit's enhanced electronics and dual temperature sensors provide accurate, dependable temperature settings across the operating range with a temperature accuracy of ± 0.5° C between 20° C and 45° C; ± 2° C below 20° C and above 45° C. The ISTHBLHTS is designed for applications that require consistent and precise high-speed shaking with temperature control to 100° C. With heating and shaking capabilities, our shakers use interchangeable blocks to accommodate tubes and microplates. Intuitive LCD touchscreen allows the user to save and track progress of 5 user-defined programs, each with 5 individual steps. Enhanced electronics provide dependable temp. settings across the operating range. Program control capabilities allow user programmable operation for automated use and memory. Storage for five separate, 5-step programs, or unlimited if using the USB. Enhanced electronics provide accurate and dependable temperature settings across the operating range. The USB port allows for easily transferring test data to a flash drive for data logging and storage. Also ideal for program storage and performing software updates.Click Here to View Product Video INCLUDED: The Ohaus ISTHBLHTS Heated Thermal Shaker includes: - 1.5mL Block - Clear Rack - Cover - Hex Head Screwdriver - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISTHBLHTS Heated Thermal Shaker Specifications Temperature Range4° C above ambient to 100° CTemperature Accuracy± 1° C between 20° C and 45° C± 2° C above 45° CSpeed Range300 to 3000 rpmSpeed Accuracy± 2%Timer1 minute to 99 hours, 59 minutesOrbit3 mm (0.12")Cooling Rateabove ambient 2-3° C/min; below ambient 0.5-1.0° C/minHeating Rate5° C/minOverall Dimensions (L x W x H)10.25 x 9.75 x 5.2" (26 x 24.8 x 13.2 cm)Ship Weight11.9 lbs (5.4 kg)Request a Formal Quote

IKA ROTATEMP me-vi Viscometer Package Viscosity Measuring Range 40,000,000 mPas Speed Range 0.01 to  (more)200 rpm Time Setting Range 0.017 to 6000 min Features - The combination of ROTAVISC viscometer and ROTATEMP high-temperature system simplifies the viscosity measurement of difficult-to-measure, highly viscous samples. - The complete system is supplied ready for connection. With its space-saving design, it fits easily into any laboratory. - ROTAVISC and ROTATEMP are compatible with the labworldsoft ® laboratory software, which makes it easy to automate, control and document your measurement results. - Samples can reach 300°C in 16 minutes without overheating. The ROTATEMP me-vi Package is the ideal solution for precise and reliable viscosity measurement of difficult-to-measure, highly viscous samples. The package combines the ROTAVISC me-vi rotational viscometer with the ROTATEMP high-temperature system to ensure optimum temperature control during the measurement process. ROTAVISC me-vi is a high-performance rotational viscometer for applications in a measuring range from 100 to 40,000,000 mPas. The space-saving ROTATEMP high-temperature system is the perfect complement for measuring temperature-dependent samples that are not able to flow at room temperature, such as asphalt, bitumen, wax, polymers, candy base or hot melt adhesives. Thanks to precise and efficient temperature control, based on the proven IKA magnetic stirrer technology, samples can be heated up to 300 °C in just 16 minutes without overheating. This allows precise and reproducible measurements to be carried out. INCLUDED: The IKA ROTATEMP me-vi Viscometer Package includes: - ROTAVISC me-vi control S000 - ROTASTAND - ROTATEMP - SP set-2 - PT 100.8 - Power Cord - Operator's Guide - Two Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW