Rohde & Schwarz DAF Matching Pad 75-60 Ohm 0-1000 MHz 0.5 W Att. 4 dB / 6 dB

Scilogex MicroPette Pipettor, Starter Kit-1. 0.5-10ul, 2-20ul, 20-200ul, 100-1000ul & Linear Sta (more)nd The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Pipettor, Starter Kit-1. 0.5-10ul, 2-20ul, 20-200ul, 100-1000ul & Linear Stand includes: - Two Year Manufacturer's Warranty

Focusing Block for BA310MET-H Focusing Block for BA310MET-H. Valid for BA310MET-H Binocular and BA31 (more)0MET-H Trinocular (Upright image).INCLUDED: The Focusing Block for BA310MET-H includes: - Manufacturer's Documentation

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Dimensions (HxWxD): 760 x 560 x 520 mm Internal drawer dimensions (HxWxD): 100 x 470 x 420 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of ECO Silver immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PBD model - For tanks of 320 mm deep - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

Don Whitley Scientific miniMACS DG250 Anaerobic Workstation Glovebox This was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up and is in good working order but has not been tested under a vacuum. It is in good cosmetic condition with minor marks from use. It is supplied with; miniMACS Vacuum pump. Serial No. 2633819.miniMACS Footswitch assembly. Part No. A03107.Whitley DG250 Anaerobic Workstation User Manual.don whitley scientific 500/1000 Catalyst Sachet. Part No. A02130.don whitley scientific 500/1000 Anotox Sachet. Part No. A02129.don whitley scientific Natural Superflex Tubing. Part No. A00454.

Thermoregulation and thermal stability at their best The Auto-Tuning thermoregulation system guarant (more)ees excellent thermal homogeneity and stability (±0.5°C). Ecological cooling system and low operating costs. Selectable incubation temperature and working range from 3 to 50°C. Uniform temperature thanks to VELP ventilation technology. 3-digit DIGITAL DISPLAY, resolution 0.1°C. Reliable and easy to control Volume of 169 liters net. Internal sockets to power devices. Intuitive digital interface, with three buttons for easy setup of the instrument. Constant monitoring according to GLP (Good Laboratory Practice). Adjustable recording time (in case of connection to VELP Ermes and TempSoft™). The optional TempSoft ™ incorporates high / low alarm thresholds. Quick and easy calibration. In the photo: the interior of the FOC 120E model, with the two electrical sockets, forced ventilation and the 6-position system for BOD Sensor Velp analysis; the control panel with the clear digital display to the tenth of a degree. Our life is connected, giving us previously unimaginable possibilities, why not connect your laboratory too? Improved productivity and safety; sharing analysis and assistance in a few clicks! Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. The Ermes cloud subscription, which allows you to connect up to 10 instruments, is available for 1 or 3 years and must be ordered separately. IN OPTION! Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with GLP (Good Laboratory Practice) FOC Connect is supplied with the MODBUS communication protocol.

Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V Temperature Range Ambient +5°C to (more) 70°C Heater Power 1.0 kW Chamber Volume 92L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer The Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V is expertly designed for effective drying and storage of lab instruments. It operates in the temperature range of room temperature plus 5°C to 70°C, utilizing natural convection. Key features include a large observation window for monitoring, adjustable feet for stability on uneven surfaces, and a stainless-steel interior that's both easy to clean and corrosion resistant. The oven is equipped with a stainless-steel pipe heater (1.0kW) and a water receiving plate at the bottom. Temperature control is managed by a PID controller with a microprocessor, allowing precise settings via digital ▲/▼ keys. It includes a K thermocouple temperature sensor and liquid-expansion temperature controller for overheat protection. Safety and usability are enhanced with a silicon rubber-packed single door and a standard 3mm glass observation window measuring 250x300mm. The oven offers a shelf plate load capacity of 15kg and has 10 shelf rest steps with a 30mm pitch. Weighing approximately 45kg, its internal dimensions are 450×450×450 mm, and external dimensions are 504×562×788 mm. The DG-400C is an excellent choice for laboratories needing a reliable and efficient solution for drying glassware and other instruments. INCLUDED: The Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V includes: - 2 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty