Rack aluminum

ÄKTAxpress is a liquid chromatography system intended for automated, multi steppurification processe (more)s. The system has been developed and optimized for purificationof Histidine-tagged and Glutathione S-Transferase (GST)-tagged recombinant proteins from clarified or crude cell lysates. ÄKTAxpress supports a number of purification protocols containing up to four chromatography steps, for example, affinity chromatography followed by desalting, ion exchange, and gel filtration. Protocols for purification of both low expressed proteins and well expressed proteins are included. Also protocols supporting purification of double tagged proteins and protocols that can be combined with on-column and off-line (batch) tag cleavage are provided. ÄKTAxpress provides the following features: •Automatic purification of up to four samples in a single run. •Purification protocols containing up to four chromatography steps. •Automated on-column affinity tag removal in the first step of purification protocols starting with an affinity/ion exchange chromatography step. •Purification protocols supporting purification of both well expressed and low expressed proteins, double tagged proteins and proteins that have been cleaved off-line. •Up to 50 mg of protein can be purified per sample. •Up to twelve ÄKTAxpress systems can be run in parallel, controlled from one computer (not included). Different purification protocols can be run simultaneously. •The systems can be placed next to each other or they can stand separately if preferred. Flow rate: 0.1 – 65 mL/min Flow rate accuracy: ±2% or ±0.02 ml/min whichever is greater Flow rate reprocibility: RSD < 0.5% Pressure range: 0 – 30 bar Step gradients (quasi-isocratic mixing) formation conditions: Water based buffers with different concentrations of salts Gradient mmix proportions: 5 – 95% Concentration accuracy: ±2%B Linear gradients conditions: Water based buffers with different concentrations of salts Linearity: ±2%B within 20 – 80%B UV monitor wavelengths: 280 and 254 nm set by lamp position and filter Optical path length: 2 nm Opitcal cell volume: 2 µL Detector cell volume: 30 µL Absorbance range: 0.01 – 5 AU Auto zero range: -0.2 – 2.0 AU Linearity, deviation: < 3% up to 2 AU Static noise, short and long term: < 40 μAU Static drift: ±0.1 mAU/h Conductivity range: 0.01 – 300.00 mS/cm Accuracy: Max. ±2% of full scale calibrated range or ±0.1 mS/cm whichever is greater Reproducibility, short and long term: Max. ±1% or ±5 μS/cm whichever is greater Noise: Max. ±0.5% of full scale calibrated range, typically ±0.1% Response time: Max. 4 s (0–95% of step) Internal volume: 24 μl Dimensions (WxdxH): 250 x 490 x 660 mm Weight: 30 kg

PT0453 Cable is used to connect the 5Y series balance or the PUE CY10 terminal to a PA-04/H Automati (more)c Feeder. Its standard length is 2 m.

Julabo FT400 Immersion Cooler, 115V/60Hz Working Temperature Range -40°C to 30°C Refrigerant R449A  (more)Fluid Type Water, Silicone, Fluorinert/Galden Features - Rapid cooling of liquids down to low temperatures - Counter-cooling of liquids in combination with heating circulators - Environmentally friendly by saving precious tap water - User-friendly operation and handling - Compact design, small footprint - Dry ice substitution JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FT400 Immersion Cooler, 115V/60Hz includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 400ml Cone Fitting Adapters, Cat. # 022638785 New in box Eppendorf 400ml cone fitting adap (more)ters (Cat. # 022638785) for rotor A-4-81 rectangular buckets for the Eppendorf 5810 and 5810R centrifuges. This is a two piece set, and the adapters are new in packaging. The Eppendorf 400ml Cone Fitting Adapters, Cat. # 022638785 arediscounted, brand-new, and includes a 6 Month Full Parts and Labor Warranty.

Temperature: Ambient to 4°C, digitally adjustable and digitally readable per 0.1°C Stainless steel i (more)nterior Dimensions (WxDxH): 760 x 820 x 2030 mm Internal dimensions (WxDxH): 530 x 650 x 1450 mm Includes 4 height-adjustable grids.

Beckman L8-80 Ultracentrifuge Lab This item was removed from a university where it was surplus to re (more)quirement. It is in good cosmetic condition externally and powers on, however, when tested we attempted to run the unit with a 70Ti rotor (not included), but encountered cooling system and speed sensor errors.Also, oil was discovered under the rotor and in the chamber/motor area, possibly due to a worn seal. Due to the above faults, this item is listed as Spares/Repair. The 3-phase plug has been removed and there is no rotor included in the sale. Also included: 1 x Operation Key1 x Original User Manual

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 400x500 mm (A x B).

E1 class mass standards are characterized by the highest precision in terms of mass. The allowable d (more)eviation from the actual weight is minimal, making standards of this class ideal for applications where every milligram matters. Product Features: Varied Standards: The set consists of 12 wire standards and 16 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 brushes, 2 tweezers and gloves, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are wires.