Polyscience P80NMA101B IP-80 Immersion Probe Cooler, 1.75” Ø Rigid Coil Probe with 180° bend, -80° to -40°C, 120V, 60Hz

Polyscience P40N7A101B IP-35 Immersion Probe Cooler, 3 Rigid Coil Probe, -35 to +40C, 120V, 60Hz3D V (more)isualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P40N7A101B IP-35 Immersion Probe Cooler, -35°C to 40°C, 1081W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark IsoBlock Digital Dry Bath w/ Two Independently Controlled ChambersBenchmark’s new IsoBlock (more) dry bath is ideal for incubation of samples at two different temperatures, in a single compact unit. The two chambers are separated by an insulated wall and are controlled independently, allowing IsoBlock to serve as two dry baths in one. The hinged (and removable) lid is also designed with a dividing wall. When closed, this dividing wall acts as a barrier, preventing air transfer between chambers.The control panel features large digital displays of both time and temperature. Both settings of a block can be adjusted at any point, without affecting the settings of the other block. The timer function is non-mandatory; IsoBlock can be used for continuous heating.Various blocks are available for accommodating nearly all popular tube sizes. In addition, the unique Quick-Flip™ universal blocks accept tubes from 0.5 to 2.0ml and, with just a quick flip to the other side, they also accommodate 0.2ml tubes or PCR strips. *Block sold separately*Click Here to View Product Video INCLUDED: The Benchmark IsoBlock Digital Dry Bath w/ Two Independently Controlled Chambers includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V Temperature Range Ambien (more)t +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 90L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 90L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle 4 x 500ml Angle Rotor for Z446/K and Z496 Centrifuges The Hermle 4 x 500ml Angle Rotor for Z4 (more)46/K and Z496 Centrifuges features a maximum speed of 8,000 RPM and a maximum RCF of 10,367 x g. This rotor is designed for use with the Hermle Z446 and Z496 Series. INCLUDED: The Hermle 4 x 500ml Angle Rotor for Z446/K and Z496 Centrifuges includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Wesemann / Open cabinet / White / 730x600x580

The GE is one of the most reliable and functional upright laboratory cabinets currently available on (more) the market. The GE upright laboratory cabinet boasts an extremely elegant and practical design: in fact, the unit is manufactured with materials of exceptional quality and maximum attention to detail. Furthermore, the internal edges are rounded in order to ensure easy cleaning. Capasity: 620L Temperature Range: +2…+8°C Adjustable support feets Exterior Stainless steel Stainless steel framework Door with lock Environmentally friendly CO2-blown polyurethane insulation Electronic control unit Reversible door Outside dimensions (w x d x h): 720mm x 850mm x 2050mm Inside dimensions (w x d x h): 600mm x 675mm x 1320mm 230V / 50Hz / 500W