Polyscience AD06S150-A11B 6L Stainless Steel Open Bath, Advanced Digital (Ambient +10 to 150C), 120V, 60Hz

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The QIAgility is a compact benchtop instrument that enables rapid, high-precision setup of PCR exper (more)iments with ready-to-use software for ease and convenience. The software provides step-by-step guidance for worktable setup and automatic calculation of all mixes, eliminating the need to program pipetting steps. Just select the kit and cycler, define your targets and start the run. For added flexibility the QIAgility is operated via a laptop computer. The instrument is highly suited for laboratories performing PCR and RT-PCR reactions with applications in: ​ Gene expression analysis Genotyping Cloning Pathogen detection Food and veterinary testing Pipetting head: Single channel Tip volume: 1 – 200 µl HEPA filter: Preinstalled dual-cartridge HEPA filter system provides positive pressure clean air within the closed hood. Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips. Table capacity: 6x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1x Master Mix Block 1x Reagent Block Precision: CV <1%, 5 – 200 µl (dry-well transfer) CV <5%, 2 – 5 µl (wet-well transfer) CV <10%, 1 µl UV lamp: Preinstalled UV lamp for worktable decontamination Dimensions (HxWxD): 450 x 540 x 630 mm Weight: 41 kg

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Scilogex Circular Tube Holder for 50ml x 8 TubesThe Scilogex Circular Tube Holder accommodates 8 x 5 (more)0ml tubes. For use with the Mx-RD-Pro LCD Digital Tube Rotator. INCLUDED: The Scilogex Circular Tube Holder for 50ml x 8 Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scientific Industries Vortex-Genie PulseTrue pulsing action is ideal for applications requiring more (more) aggressive action than standard vortexing. Variable RUN/STOP time for quick pulsing or interval mixing. Fully programmable "ON" and "REST" function. The Vortex-Genie Pulse is new in the box . Includes: Power Cord Original Manufacturer Documentation Full 6 month Parts and Labor WarrantyScientific Industries Vortex-Genie Pulse Specifications Speed (RPM) 500-3000 (2850 for 50Hz models) Timer 1-99 minutes or continuous Pulse - ON/OFF 0.1 seconds - 99 minutes Product Weight 4 Kg (8.8 lb) Dimensions (base) 165 x 122 x 165mm (6.5 x 4.8 x 6.5in) Markings ETL listed / CE

Eppendorf 3 x 2.6/7ml Adapters for F-34-6-38, Cat. # 022637279 New in torn packaging Eppendorf 3 x t (more)ubes 2.6 - 7 ml / 75 mm Adapters for fixed angle rotor F-34-6-38, Cat. # 022637279. For use with 5804/R and 5810/R centrifuges. This is a two piece set, and the adapters are new in torn packaging. INCLUDED: The Eppendorf 3 x 2.6/7ml Adapters for F-34-6-38, Cat. # 022637279 includes: - Full 6 Month Parts and Labor Warranty

This Agilent Technologies 3100 Offgel Fractionator &nbsp;Model: G3100A was removed from a university (more) lab where it was surplus to requirements. The item is in good cosmetic condition. There are some scratches and stains, primarily along the lid and minor marks/scratches on the surface. The item powered on without issue. We were able to use the controller to access the settings for the different trays. When the trays activated they lit up to indicate they were functioning. The item also comes with the following:1x Agilent Fractionator ControllerModel: G3101A 1x Kingston Technology 1GB Compact Flash

This item has just arrived in our stock. Please enquire for further details.

M1 Mass Standard - knob weights - set (1 mg - 50 g), wooden box.

HX7 H scale&rsquo;s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today &ndash; that&rsquo;s the multifunctionality. That&rsquo;s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices &ndash; thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7&rsquo;s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

Benchmark Orbi-Shaker Orbital Shaker The powerful Orbi-Shaker is capable of mixing a 14 lb load capa (more)city up to speeds as high as 300 rpm with digital speed control. The standard platform (included) features a non-slip, rubber coated surface, ideal for tissue culture flasks, petri dishes, and staining trays. The convenient MAGic Clamp platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Orbi-Shaker Orbital Shaker includes: - 13 x 12 in Platform w/ Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty