Ohaus i-D33XW30C1R6 AM Defender 3000 Washdown Bench Scale, 60 lb., 0.01 lb.

Spinning top lift BOY 08 510.00 PROLABO 20 x 20 cm Lifting support, lifting table for laboratory Tab (more)letop dimensions: 200 x 200 mm With traces of wear

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Analysis time: 3.5 min at 30 mg N (6.5 min at 200 mg N) Distillation capacity: ~ 40 ml/min Measuring (more) range: 0.1 – 200 mg N Reproducibility: 1% RSD (including digestion step) Recovery: 99.5% for nitrogen levels between 1 – 200 mg N Drain tube: 200 ml in 2 s. Reagent pump volumes: 0 – 150 ml in 10 ml increments Delay: 0 – 999s SAfE Patented: 0 – 15 s Water usage: 2 l/min with water temp of 30°C (During distillation): 1 l/min with water temp of 15°C Dimensions: (WxDxH): 530 x 440 x 760 mm Weight: 35 kg

Polyscience SD15R-30-A11B 15L Refrigerated Circulator, Standard Digital (-30 to 170C), 120V, 60HzPol (more)yScience Circulating Bath with Standard DigitalTemperature Controller. Extremely easy to use and maintain, it combines designinnovation with highly intuitive operation to deliver convenient and reliableliquid temperature control for a wide range of applications.Features Large, universal icon and English display Swivel 180™ Rotating Controller On-board connectivity: RS-232 serial output On-screen prompts Automatic performance optimization Single-point calibration capability INCLUDED: The Polyscience SD15R-30-A11B 15L Refrigerated Circulator, -30°C to 170°C, 915W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Adattatore AC/DC per frigo - congelatori da trasporto Indel B IN:100-240V 50/60Hz OUT:12V 5A

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The EM series mantle is made with extreme care and is hand sewn to assure its reliability, quality a (more)nd safety. Maximum heat transfer to the sample is achieved by having excellent insulation around the cartridge and good flask coverage. Designed with flexibility and ease of use in mind, the EM series heating mantle is a reliable workhorse for your heating applications in the laboratory. All EM Electromantles have a built-in energy regulator with indicator lamps for power and heater operation. All mantles have support rod clamps as an integral feature and incorporate a grounded earth screen and double fuses for added safety. Flask capacity: 250 ml Material: Polypropylene outer case Max element temperature: 450°C Dimensions (DxWxH): 310 x 238 x 145 mm Weight: 1.25 kg

Interchangeable blocks with excellent thermal precision Broad (up to 30°C) and accurate temperature  (more)gradient Reliable and easy to use with low noise level Over-tightening protection system in the heated lid Accepts almost all standard PCR plastics Available Blocks: 2x TCA0384 Arktik Thermal Cycler 384 well block  3x TCA0096 Arktik Thermal Cycler 96 well block (WIT) (price / block) (Thermo Scientific Arktik Thermal Cycler is a reliable and flexible PCR instrument for the everyday requirements of any laboratory. Arktik Thermal Cycler is suitable for a wide range of applications from individual reactions to high-throughput projects. It offers flexibility with three different interchangeable blocks: 96-well block, 384-well block and a dual block with two 48-well units. A broad temperature gradient simplifies temperature optimization. It features an easy-to-use graphical interface for protocol setup and also offers preprogrammed protocols for maximum convenience.)

The MW-01-A mass converter is designed to be a component of an industrial load cell scale. Depending (more) on the needs, communication with the mass converter can be carried out via the following communication interfaces: RS232, RS485, Ethernet, Ethernet IP, Profibus or Profinet. The MW-01-A mass converter is compatible with indicators and PC. Operation of the MW-01-A mass converter via PC is carried out using „MW Manager” software.

Hermle 15ml Conical Insert (2pk) The Hermle 15ml Inserts are for use with the 6 x 85ml Rotor for the (more) Z326 and Z326 K centrifuges. INCLUDED: The Hermle 15ml Conical Insert (2pk) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Coated Glassware Set G1B Diagonal condenser for all standard distillations; theoption with  (more)the most affordable price - With transparent plastic coating - suitable for atemperature range up to max. 80 ° C - Glassware set includes one 1,000-ml evaporating flaskand one 1,000-ml receiving flask - Evaporating flasks and vapor tubes which come with astandard NS 29/32 joint size are also available with NS 24/29 groundjoints - Ventilation cap without ground joints for easy handling andgrease-free operation included - A venting valve with refill function is optionally available - Not suitable for the automated distillation program DynamicAUTOaccurate on Hei-VAP Expert / Ultimate Control models - Also available upon request: glassware sets for Soxhletextraction and descending condenser system INCLUDED: The Heidolph Coated Glassware Set G1B includes: - G1B Diagonal Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Ventilation Cap - Full 3 Year Manufacturer's Warranty