Nikon 238422 AL7 Obj. 2x Stereo Microscope 20x Stereo Mikroskop

Branson Stainless Steel Continuous Flow Attachment For use with Branson SFX250, SFX550, S250A, and S (more)450A SonifiersThe stainless steel, in-line continuous flow cell uniformly processes low-viscosity solutions at rates up to 10 GPH (38 LPH). It can be used to emulsify, disperse, and homogenize by pumping a solution through a zone of intense ultrasonic activity. The degree of processing is controlled by varying the amplitude of the ultrasonic horn and the flow rate. Some solutions may require recirculating until the desired results are obtained. The continuous flow attachment incorporates a cooling jacket through which a suitable cooling liquid can be circulated to retard heat build-up during extended operation. The attachment may also be sealed in a closed system to assure sterile conditions and inhibit contamination when working with infectious materials.INCLUDED: The Branson Stainless Steel Continuous Flow Attachment includes: - Manufacturer's Warranty

Gilson F171501 PIPETMAN DIAMOND Tips D1000ST, 100-1000uL The Gilson F171501 PIPETMAN DIAMOND Tips D1 (more)000ST, 100-1000uL are designed to fit your PIPETMAN perfectly. They deliver accurate and precise pipetting when used in conjunction with Gilson pipettes. One commercial unit/quantity of the autoclavable TIPACK includes 10 racks of 96 tips (total of 960 already racked tips). These tips are fully autoclavable and color-coded for easy identification while being compliant with Good Laboratory Practice (GLP). Using PIPETMAN DIAMOND Tips with your PIPETMAN ensures maximum accuracy and precision and delivers consistent results. The perfect air-tight seal prevents leaks. The tips are made of pure polypropylene to deliver the correct volume and ensure complete dispensing. Volume graduations make it easy to visually check the volume aspirated. Gilson tips are manufactured in a clean room environment ensuring they are free of detectable contaminants that can affect your results. From mold to bench, our tips are guaranteed, certified, and traceable to meet the most stringent demands in many applications. Uniquely designed TIPACKS feature a dual-purpose lid: hinged to easily open and close while using tips; or simply pull it out of the hinges to set on top or discard for high-throughput tip usage. TIPACKS are compact, ergonomic, and eco-friendly. INCLUDED: The Gilson F171501 PIPETMAN DIAMOND Tips D1000ST, 100-1000uL includes: - 10 Racks of 96 Non-Filtered Tips - 3 Year Manufacturer's Warranty

IKA DB 2.2 Conical Tube Dry Block (50 ml)

VACUUBRAND BVC Control Fluid Aspiration System Ultimate Vacuum 150 mbar / 112 torr Maximum Pumping  (more)Speed 0.5 CFM at 60Hz Control Range 150 - 850 mbar Features - powerful and long-lasting chemistry diaphragm pump for universal economical use. - Extremely compact, space saving and low noise and thus the ideal tool in the workplace. - Easy operation due to electronically adjustable suction power via touch panel, for strong or sensitive suction. - Autoclavable collection bottle designed to reduce aero­sol and foam formation; with hydrophobic protection filter 0.2 µm, autoclavable quick-couplings available as accessory. - Ready to accept a second aspiration hand controller (VHCpro) to support two users. The BioChem-VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants. The vacuum level - and thus the suction force - is exactly adjustable by the electronic touch panel and allows a sensitive and reproducible operation. The chemically resistant diaphragm vacuum pump is automatically turned on and off as needed, which reduces the low noise level even further. The BVC control is available in two complete equipment options with different collection flasks. The 2l borosilicate glass bottle with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4l bottle of unbreakable polypropylene (PP) is used. The smooth surfaces allow an easy cleaning of the systems. INCLUDED: The VACUUBRAND BVC Control Fluid Aspiration System includes: - Chemistry Diaphragm Pump - 4L Collection Bottle - Adjustable Suction Power Control Panel - Non Contact Liquid Level Sensor - Quick Couplings (4l pp version) - Aspiration Hand Set VHC with Protection Filter - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

Ohaus 30400164 Modular Heat Block, Titer Plates The Ohaus 30400164 Modular Heat Block, Titer Plates  (more)is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400164 Modular Heat Block, Titer Plates includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Amersham Biosciences AKTA Pilot Liquid Chromatography System This was removed from a laboratory whe (more)re it was surplus to requirements. The unit powers up and has been professionally serviced. It is in good working order. A report is available on request. It is in excellent cosmetic condition with minor marks.

Labconco 9000722 WaterPro PS HPLC/UF Hybrid Polishing Station with Dispensing Gun, 115V, 60Hz Featur (more)es - Timed dispense for unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000722 WaterPro PS HPLC/UF Hybrid Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C 200 h auto Semi-Automated Halogen Resistant Calorimeter w/ Automated Water Handling Measuring  (more)Range Max. 40000 J Measuring Time Dynamic Approx. 8 min Cooling Medium Permissable Operating Pressure 2 bar Features - Compact, space-saving, and cost-effective design for educational and low-volume industrial laboratories - Capable of measuring calorific values for liquid and solid samples - Four operation modes: isoperibol, dynamic, manual, and time-controlled (14 min). - Semi-automated system with manual water and oxygen handling, and optional automation available - Closed-loop water circulation with optional RC 2 basic chiller for improved reproducibility and efficiency - Includes C 5012 decomposition vessel, suitable for high-halogen and sulfur samples (3%) - Operated via C 6040 CalWin software for monitoring, multi-calorimeter management, and data export - Compatible with DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711, GOST 147, GOST 21261 - Compact dimensions (15.7 x 15.7 x 15.7 in.) and lightweight (46.3 lb.) for ease of installation - Installation and calibration consumables included for seamless setup The IKA C 200 h auto Semi-Automated Halogen Resistant Calorimeter w/ Automated Water Handling allows operating the C 200 with a completely automated water cycle. This results in ease of handling and saves valuable time especially for laboratories with a low number of analyses. The water circulates in a closed loop and is kept at a constant temperature by using a recirculating chiller. This leads to shorter preparation time for each experiment and even better reproducible results. The semi-automated and conforming-to-standards combustion calorimeter determines the gross calorific value of liquid and solid samples. So far it has mainly been used for teaching and training purposes at technical schools and universities. Due to the automated water handling it is now also suitable for industrial laboratories with low number of analyses. The catalytic activated, halogen resistant decomposition vessel C 5012 is specifically designed for the combustion of samples that contain halogens and sulfur ( 3 % ). The material of the decomposition vessel (Hastelloy) prevents corrosion caused by samples with high chlorine content. The catalytic activated inner-surface leads to higher recovery rates in case analysis of halogens and/or sulfur is required after the combustion. Four different operation modes enable the user to control the measuring times according to individual requirements: Isoperibol: approx: 17 min. Dynamic : approx. 8 min Manual : approx. 17 min (depends on the operator) Time controlled : 14 min Measurements are possible according to e.g. DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711. The software C 6040 CalWin controls the unit and monitors the measurement of the samples. Additionally, collected data can be exported to e.g. Excel, Word, SQL and LIMS for further analysis. It is possible to operate several calorimeters with one PC. A PC is not part of the scope of delivery and needs to be provided by the operator. CalWin is sold separately. INCLUDED: The IKA C 200 h auto Semi-Automated Halogen Resistant Calorimeter w/ Automated Water Handling includes: - C 5012 Decomposition Vessel, Halogen Resistant - C 200.2 Conversion Kit for C 5012 - C 200.RC Set of Hoses - RC 2 Basic Recirculating Chiller - C 248 Oxygen Filling Station - Ignation Adapter - Water Emptying Hose - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Potteau door cabinet L.Grey 600

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW