Mettler Toledo Seven2Go Pro S9 + InLab OptiOx Resolved Oxygen Meter DO

Eppendorf 1 x 7-15ml Adapters for F-35-6-30, Cat. # 022654512 The Eppendorf 1 x 7-15ml Adapters for  (more)F-35-6-30, Cat. # 022654512 Adapters are for fixed angle rotor F-35-6-30, and hold round bottom tubes 16 x 75-105 mm. For use with Eppendorf 5430/R centrifuges. This is a two piece set, and the adapters are new in torn packaging. INCLUDED: The Eppendorf 1 x 7-15ml Adapters for F-35-6-30, Cat. # 022654512 includes: - Full 6 Month Parts and Labor Warranty

Boekel Scientific 301300 Large Platelet AgitatorThe Boekel Scientific 301300 Large PlateletAgitator  (more)is designed for continuous quiet operation and to meet mixingrequirements in the storage of platelets. For use with Boekel ScientificPlatelet Incubator. Easy sliding and removable agitator shelves Rotation Failure alarm if not connected to Boekel Platelet Incubator Non-slide feet to alleviate unit walking on the bench as well as for placement within the Boekel Platelet Incubator Click Here to View Product Video INCLUDED: The Boekel Scientific 301300 Large Platelet Agitator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Hygiena EnSure luminometer is a quality assurance system that can check and detect swabs for the (more) presence of ATP (Andenosine Tri Phosphate) within 15 seconds. The presence of ATP may indicate biological contamination. In locations such as hospitals, it is extremely important that proper cleaning is carried out. With the use of the EnSure, it can be scientifically proven within seconds that the cleaning has been done properly. Implementing a monitoring system to validate cleanliness has been shown to increase compliance with cleaning procedures from 40% to 82%. The main difference with the Hygiena SystemSure luminometer is that the Ensure is more sensitive and can detect up to 0.1 femtomole ATP. The EnSure uses the latest photodiode sensor technology, which has superior sensitivity and stability. In addition, the design is made in such a way that the luminometer is easy to operate with one hand. The luminometer works on two AA batteries for a long battery life, you can use an average of 8-12 months of continuous use before the batteries need to be replaced. Measures ATP, High Sensitivity ATP/Allergen Prevention, TVC, Enterobacteriaceae, Coliforms, E. coli, ALP, and ACP test devices Sensitive – can detect down to 0.1 femtomoles of ATP Advanced photodiode sensor technology – Internal solid-state detector is not affected by drops or shakes Storage: 100 programmable test plans 200 programmable user IDs 251 programmable locations per test plan 5000 programmable test locations Small, lightweight, handheld instrument (250 g, 70 x 180 x 30 mm) Quick-test mode enables ad-hoc testing Large screen with back-light and optional BOLD text Powered by 2 x AA batteries for several months of uninterrupted use Removable read chamber design allows for easy cleaning Durable outside shell and sealed keypad to protect against splashes and wear

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Under-bench cabinet depth 51cm - Length 65cm Laboratory cabinet Length: 65cm Depth: 51cm Height: 71c (more)m In melamine 2 doors On casters (hidden by the finishing profile) In good condition Slightly oxidized hinges and some small traces of wear (see photos)

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

Mild steel powder coated weighing platform We provide you with mild steel powder coated weighing pla (more)tforms with readability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms have a square shape of 300 x 300 mm or a rectangular shape of 400 x 500 mm or 500 x 700 mm. Use the potential Our platforms can work with one of eight weighing terminals to choose from: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. The frame is made of mild steel. Mild steel powder coated weighing platforms are marked by a high degree of protection IP 65.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Varied Standards: The set consists of 12 flat polygonal sheets and 16 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 2 brushes and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.

Hermle 4 x pcr rotor, Hermetically Sealed (for Z216 series only) The Hermle 4 x PCR rotor with a her (more)metically sealed lid is designed for use exclusively with Hermle Z216 series centrifuges. It has a maximum speed of 15,000 RPM, generating a maximum relative centrifugal force (RCF) of 15,343 x g, making it ideal for a variety of PCR applications. The rotor can accommodate up to 4 strips of 8-PCR tubes, providing ample space for PCR experiments. The rotor has an angle of 45°, which facilitates effective separation of samples. The hermetically sealed lid provides a safe and secure environment for samples and prevents contamination due to aerosols. Overall, the Hermle 4 x PCR rotor is an excellent choice for PCR applications in a laboratory setting, providing consistent and reliable results. INCLUDED: The Hermle 4 x pcr rotor, Hermetically Sealed (for Z216 series only) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Seat height: 485 – 675 mm