Mettler Toledo 30300921 Compact Ionizer USB with Holder

Lancer Ultima 1400 LX Labware Washer Lab This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, but displays a 'Service warning.' It is overdue a service. The front right side leaks, likely due to a damaged door seal. It requires full service to address the warning and leak before use. Therefore, this unit is listed as Spares/Repair.

Edwards T-Station 85H Wet Turbo Station - CF63 200-240V Ultimate Pressure <5 x 10-9 mbar Inlet Co (more)nnection DN 63 CF Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application nEXT T-StationThe Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All the nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of the active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85The T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Wet Turbo Station - CF63 200-240V includes: - Power Cord - One Year Manufacturer's Warranty

Polyscience AP15H200-A11B 15L Heated Circulator, Advanced Programmable (Ambient +10 to 200C), 120V,  (more)60Hz3D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AP15H200-A11B 15L Heated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Time/temperature programming (ten 100-step programs) Intuitive 4.3” (10.9 cm) SmartTouch display 6 languages: French, German, Spanish, Chinese, Arabic, English Variable speed pump with open- and closed-loop external circulation capability Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe Event scheduling (time & date) with real-time clock Review temperature trends for up to 10 days Multiple selectable “home” screens On-screen help Automatic and/or user-adjustable performance optimization 5-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AP15H200-A11B 15L Heated Circulator, Advanced Programmable (Ambient +10 to 200C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

p=0…1.5 bar 230V 5.5 VA 3x including foot pedal 1x w/o foot pedal

This listing is for a refurbished Laboklav 55M Autoclave Incl. commissioning in UK. (outside the UK (more) is possible also, please request and we will try and accomodate) Vertical device, 55l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 740 x 765 x 600 chamber dimensions (Ø x d in mm) 410 x 460 Steam generator 3,3kW Fast re-cooling with double jacket 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

Scilogex MicroPette Pipettor, Starter Kit-1. 0.5-10ul, 2-20ul, 20-200ul, 100-1000ul & Linear Sta (more)nd The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Pipettor, Starter Kit-1. 0.5-10ul, 2-20ul, 20-200ul, 100-1000ul & Linear Stand includes: - Two Year Manufacturer's Warranty

Yamato SM-520 Large Capacity Sterilizer with Dryer 50L, 100-120V Operating Temperature Sterilization (more) 105°C to 135°C Operating Temperature Drying 135°C to 150°C Internal Capacity 50L Features - Interactive keypad input allows committing sterilization settings to memory - 7″ interactive touch screen - Suitable for protein modification at the maximum operating temperature of 135°C - Easy settings and operation modes for a multitude of sterilization process - Increased safety and function list including forced cooling and memory functions - Equipped with multiple safety locking mechanism for the lid - Comes with large capacity (11L) heat resistant stainless steel container - Alarm buzzer sounds when high or low pressure error occurs Large capacity, high performance, fully automatic 50L steam sterilization from start to finish with high pressure steam sterilization and drying steps. Interactive keypad input (touch panel) allows committing sterilization settings (time & temperature) to memory 7″ interactive touch screen Suitable for protein modification at the maximum operating temperature of 135°C. Easy settings and operation modes for a multitude of sterilization process. Increased safety and function list including forced cooling and memory functionsEquipped with multiple safety locking mechanism for the lid. Comes with large capacity (11L) heat resistant stainless steel container. Alarm buzzer sounds when high or low pressure error occurs. Sterilizing temp. range 105 to 135°C. Drying temp range 135 to 150°C. INCLUDED: The Yamato SM-520 Large Capacity Sterilizer with Dryer 50L, 100-120V includes: - 2 pcs. stainless steel mesh basket (⌀344 x D200 mm) - Drain board x 1, drain bottle x 1, chemical indicator 1 set, filter x 1, droplet tray x 1 - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus 30400136 Thermal Block for 4 x 50 mL Conical Tubes The Ohaus 30400136 Thermal Block for 4 x 50 (more) mL Conical Tubes is crafted from Valox 357 Plastic for durability. This block is compatible with all Ohaus ISTH Series Thermal Shakers, and has a well depth of 3.97 in. INCLUDED: The Ohaus 30400136 Thermal Block for 4 x 50 mL Conical Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Roller shaker with 6 rolls provides smooth rocking and rolling action at a fixed speed. Used for mix (more)ing blood samples, solid and liquid suspensions and viscous samples. The unit can be used with all conventional tubes and cylindrical bottles. Easily removable attachments provide for quick cleaning in case of sample spills. Usable at 4°C to 50°C in incubators Suitable for continuous operation Removable rolls enable shaking of larger tubes Easy operation with touch keypad Shaking diameter: 24,5 mm (height) Type of movement: rolling Permissible ON time: 100 % Speed fixed: 30 rpm Rolls: 6 Rolls Ø: 32 mm Rolls length: 327 mm Working area length: 350 mm Rolls luffing angle fixed: 3° Rolls max stroke at roll end: 16 mm Dimensions (WxHxD): 240 x 115 x 545 mm Weight: 4.563 kg