Light Guide 12 / 14mm 75cm Cold Light Source Microscope Mikroskop

Accuris AP1096 IsoPure 96 Automated Purification System Sample Capacity 96 Samples / 50ul to 1000ul  (more)Display 7.0 Inch Color Touch Screen Program Memory 100 Programs (Internal Memory) Features - Compatible with all popular magnetic bead kits - Touch screen panel for on-board programming and operation - Process up to 96 samples in deep-well plates - 8-position carousel with 2 heating blocks - Sample volumes from 50µl to 1000µl - Lysis and elution temperature range of Ambient +5°C to 120°C - Variable mixing speeds with 10 levels to select from - Ultraviolet sterilization lamp (UVC) inside the processing chamber provides effective elimination of most bacterial, viral and stray genomic DNA contaminants The Accuris AP1096 IsoPure 96 Automated Purification System is a high throughput, automated system that improves the efficiency and reproducibility of magnetic bead-based purification protocols. Capable of processing up to 96 samples at one time, the instrument is easy to set up and program. Mixing, magnetic bead transfer, washing, and elution steps are performed automatically. The purification process can be completed within 10 to 60 minutes depending on the type of reagent kit used and complexity of the program. The IsoPure™ 96 can be programmed by using the color touch screen or the included mouse. After a protocol has been created, the instrument will calculate and display the estimated time for each step and the total time. Typical step settings include: - Tip Comb Loading and Unloading: Automate tip comb loading and unloading by designating the respective plate positions in the script. - Mixing: Parameters for mixing time, speed, and amplitude can be programmed for each step of the protocol. - Temperature Control: Heating of the sample mixture during the lysis and elution steps significantly improves the purity and yield of the target molecule. The IsoPure 96 is equipped with 2 heating blocks on the plate carousel that can be precisely set to temperatures from ambient + 5°C to 120°C. IsoPure deep well plates fit into the heating blocks for efficient heat transfer. A cooling fan inside the processing chamber maintains the ambient operating temperature to ensure consistent results. - Bead Collection and Release: The complete collection of magnetic beads from sample mixtures is crucial for maximizing the yield of purified analytes. The IsoPure software offers full control of magnetic parameters to ensure cleaner extractions. General settings allow control of magnet speed, position, repeat collection cycles, etc, to guarantee consistent yields. Accuris Instruments has partnered with leading magnetic bead kit manufacturers to develop and optimize protocols for specific applications. To request scripts for specific kits, or for assistance in optimization, please contact us. An ultraviolet sterilization lamp (UVC) inside the processing chamber provides effective elimination of most bacterial, viral and stray genomic DNA contaminants. This additional safeguard reduces the possibility of unwanted DNA/RNA contamination of critical samples that could be amplified downstream in a PCR detection assay. UV sterilization time can be adjusted based on specific program requirements to ensure a sterile environment prior to purification. The IsoPure 96 can store up to 100 program files which can be transferred between instruments, or to a computer for storage or sharing. Simply insert the included flash drive to export the selected files. Programming control can be done via the touch screen, or by using the included mouse. A PC can also be connected for remote programming. Accuris offers high-quality deep well plates and magnetic tip combs designed to fit the IsoPure 96. Produced using virgin polypropylene and packaged in a sterile facility, these consumables are guaranteed to be contaminant-free. The IsoPure 96 also accepts industry-standard 96 deep well plates and tip combs designed for high throughput purification systems. INCLUDED: The Accuris AP1096 IsoPure 96 Automated Purification System includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 1 x 25ml Adapters, Cat. # 022639145 The Eppendorf 1 x 25ml adapters (Cat. # 022639145) are (more) for round 85ml buckets with the A-4-38 rotor. For use with Eppendorf 5702/R centrifuges. This is a two piece set, and the adapters are new in packaging.

Eppendorf A-4-81 Buckets The Eppendorf A-4-81 Buckets are for use with the Eppendorf A-4-81 Rotor. T (more)hese buckets feature a capacity for 4 x 500ml samples. This is a four piece set, and the buckets are brand new in packaging. INCLUDED: The Eppendorf A-4-81 Buckets includes: - Set of 4 Buckets - Full 6 Month Parts and Labor Warranty Eppendorf A-4-81 Buckets SpecificationsBucket ShapeRectangularRotor CompatibilityEppendorf A-4-81 Swing Bucket Rotors

Polyscience AP28R-30-A11B 28L Refrigerated Circulator, Advanced Programmable (-30 to 200C), 120V, 60 (more)Hz3D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AP28R-30-A11B 28L Refrigerated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Time/temperature programming (ten 100-step programs) Intuitive 4.3” (10.9 cm) SmartTouch display 6 languages: French, German, Spanish, Chinese, Arabic, English Variable speed pump with open- and closed-loop external circulation capability Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe Event scheduling (time & date) with real-time clock Review temperature trends for up to 10 days Multiple selectable “home” screens On-screen help Automatic and/or user-adjustable performance optimization 5-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AP28R-30-A11B 28L Refrigerated Circulator, -30°C to 200°C, 915W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience P10N8A101B IP-100 Immersion Probe Cooler, 0.7 Rigid Cold Finger Probe, -100 to -60C, 120 (more)V, 60Hz3D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P10N8A101B IP-100 Immersion Probe Cooler, -100°C to -60°C, 85W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Sony Solid-State Memory Camcorder Model-PMW-200 This item was removed from a university where it was (more) surplus to requirement. It is in reasonably good cosmetic condition, powers on, and has been tested with an in-house charger. Please note that it does not include a battery or charger. It will require the following to be operational: Sony BC-U1 or BC-U2 Charger/PSU.And a BP-U30/U60/90 battery pack.

Qiagen QIAcube Automated DNA / RNA Purification Robot This was removed from a university lab where i (more)t was surplus to requirements. It is in good cosmetic condition internally and externally, other than a missing panel covering the power button. Error 5167 happens when attempting to close the centrifuge lid because it is stuck open.Error with the centrifuge: cover opens before lid moves. We were unable to test this further. Therefore this item is sold as Spares or Repairs.

This listing is for a Full Mueller PyroPue WFI System.The unit is in full working condition and is r (more)eady for immediate release.This Unit was installed new in 2015 by Freestead Process Technology.This system is in immaculate condition as the sites steam requirements were low.The “Turned on Time”of the Steam Generator's is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time".The Mueller PyroPure WFI System stands out as a high-performance, integrated solution for the pharmaceutical and biotechnology industries, focusing on the production, storage, and distribution of ultra-high-purity Water for Injection (WFI). Below is an in-depth look at its components, capabilities, and specifications.Key Components2x Mueller P7310 Pure Steam GeneratorHigh Capacity: Generates 2,300 lb/hr (1,043 kg/hr) of pure steam, suitable for high-volume operations.Operational Flexibility: Can operate alternately with another unit of the same model, maximizing efficiency and reducing downtime.Regulatory Compliance: Meets USP WFI standards, ensuring suitability for pharmaceutical applications.Maintenance-Friendly Design: Features an external evaporator for easy access and servicing, minimizing contamination risks.Advanced Control: Equipped with an Allen Bradley Compact Logix PLC and an intuitive operator interface terminal (OIT) for real-time monitoring and control.Safety Mechanisms: Includes pressure relief valves and temperature controls to ensure safe operation.Energy Efficiency: Designed to optimize energy consumption, especially when alternating operations between units.Durable Construction: Made from high-quality stainless steel for longevity and hygienic conditions.1x Mueller P4003 Pure Steam Condensing SystemCondition: This unit is in full working condition and ready for immediate release. Installed new in 2015 by Freestead Process Technology.Capacity: Produces 100 gallons per hour (379 litres per hour) of WFI-quality distillate, with a pure steam inlet capacity of 807 lb/hr (366 kg/hr).Compliance: Meets stringent USP WFI standards, is CE marked, and FDA compliant with 3.1B material certification.Core Features:Utilizes a tangential nozzle design for superior impurity separation.Drainable components to minimize contamination risks, with electro-polished 316/316L stainless steel ensuring hygienic operation.Easy maintenance due to a removable tube bundle in the condenser and minimal instrumentation, requiring just 24 inches of clearance for service.1x Ormandy Newade WFI Storage VesselCondition: This 2000L WFI storage vessel is also in full working condition, installed in 2015 by Freestead Process Technology.Capacity: Perfectly balances storage efficiency for mid-sized operations with its 2000 litres capacity.Design Flexibility: Available in both horizontal and vertical configurations, customisable based on specific facility layouts.Material Excellence: Made from high-grade austenitic and Duplex stainless steel, ensuring durability and resistance to corrosion.Compliance: Adheres to key industry standards such as PD5500, ASME VIII, and EN 13445, and is CE marked under the Pressure Equipment Directive.1x Fristam FPE742/185A Centrifugal PumpCondition: This robust 5.5KW sanitary pump is operational and ready for immediate use, also installed in 2015 by Freestead Process Technology.Hygienic Design: Features close internal clearances (as tight as 0.5 mm) for efficient and sanitary operation, especially in high-purity applications.Advanced Engineering: Optimized impeller design reduces risks of cavitation, enhancing the smooth transfer of sensitive products.Robust Construction: Crafted from 316L stainless steel, known for its strength and durability, making it suitable for demanding environments.Applications:Pharmaceutical Manufacturing: Ideal for sterilizing environments, sensitive product handling, and ensuring compliance with stringent regulations.Biotechnology: Provides essential WFI for bio-processing, maintaining the integrity of sensitive biological applications.Healthcare: Supports humidification and sterilization processes in clean rooms and hospital settings.1x Freestead Technology WFI Storage Vessel Control panelA control panel designed and built for the WFI system.Please see our individual product listing of each item for more detailed information.

This item has just arrived in our stock. Please enquire for further details.

Hermle Compact Hematocrit Centrifuge Due to its compact design the Z207-H Hematocrit Centrifuge is t (more)he perfect centrifuge for even the smallest of lab spaces. It is equipped with a hematocrit rotor for 24 x capillaries. Accompanied by Hermle’s easy to use control panel , the unique EZ-Scroll™ touch pad, gives you ease of control and a modern feel. An advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-H features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily. INCLUDED: The Hermle Compact Hematocrit Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty