Leica Mikroskop Graticule Raster 100 x 1 mm 10376122

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

ÄKTAxpress is a liquid chromatography system intended for automated, multi steppurification processe (more)s. The system has been developed and optimized for purificationof Histidine-tagged and Glutathione S-Transferase (GST)-tagged recombinant proteins from clarified or crude cell lysates. ÄKTAxpress supports a number of purification protocols containing up to four chromatography steps, for example, affinity chromatography followed by desalting, ion exchange, and gel filtration. Protocols for purification of both low expressed proteins and well expressed proteins are included. Also protocols supporting purification of double tagged proteins and protocols that can be combined with on-column and off-line (batch) tag cleavage are provided. ÄKTAxpress provides the following features: •Automatic purification of up to four samples in a single run. •Purification protocols containing up to four chromatography steps. •Automated on-column affinity tag removal in the first step of purification protocols starting with an affinity/ion exchange chromatography step. •Purification protocols supporting purification of both well expressed and low expressed proteins, double tagged proteins and proteins that have been cleaved off-line. •Up to 50 mg of protein can be purified per sample. •Up to twelve ÄKTAxpress systems can be run in parallel, controlled from one computer (not included). Different purification protocols can be run simultaneously. •The systems can be placed next to each other or they can stand separately if preferred. Flow rate: 0.1 – 65 mL/min Flow rate accuracy: ±2% or ±0.02 ml/min whichever is greater Flow rate reprocibility: RSD < 0.5% Pressure range: 0 – 30 bar Step gradients (quasi-isocratic mixing) formation conditions: Water based buffers with different concentrations of salts Gradient mmix proportions: 5 – 95% Concentration accuracy: ±2%B Linear gradients conditions: Water based buffers with different concentrations of salts Linearity: ±2%B within 20 – 80%B UV monitor wavelengths: 280 and 254 nm set by lamp position and filter Optical path length: 2 nm Opitcal cell volume: 2 µL Detector cell volume: 30 µL Absorbance range: 0.01 – 5 AU Auto zero range: -0.2 – 2.0 AU Linearity, deviation: < 3% up to 2 AU Static noise, short and long term: < 40 μAU Static drift: ±0.1 mAU/h Conductivity range: 0.01 – 300.00 mS/cm Accuracy: Max. ±2% of full scale calibrated range or ±0.1 mS/cm whichever is greater Reproducibility, short and long term: Max. ±1% or ±5 μS/cm whichever is greater Noise: Max. ±0.5% of full scale calibrated range, typically ±0.1% Response time: Max. 4 s (0–95% of step) Internal volume: 24 μl Dimensions (WxdxH): 250 x 490 x 660 mm Weight: 30 kg

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

RS 232 cable: Balance - computer. Cable length: 5 m Compatible with: - Scales with PUE C315 terminal (more) - PUE C315 terminal

Julabo CORIO CP-BC6 Heating Circulator, 115V/50-60Hz Working Temperature Range 20°C - 200°C Heating  (more)Capacity 1000W Fluid Type Water, Silicone Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over between internal and external circulation - USB &amp; RS232 connection - High-quality bath tanks made of stainless steel with bath lid and drain tap - Integrated cooling coil for counter-cooling CORIO™ CP heating circulators are suitable for temperature applications to 200 °C with circulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CP circulator incorporates easy change-over for control of fluid circulation internally or externally.Pump inlet/outlet fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. Systems include insulated stainless-steel tanks with integrated cooling coil and drain ports. Bright LED display with easy to use interface including USB and RS232 connections for external PC control and data-logging. PID temperature control provides ±0.02 °C stability. Adjustable centrifugal pump capacity of 8-27 L/min with pressure from 1.5-10.2 psiClass III (FL) according to DIN 12876-1INCLUDED: The Julabo CORIO CP-BC6 Heating Circulator, 115V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Bath Lid - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This JDS SB Series Fiber Optic Switch &nbsp;Part No. SB16B5-C0FA was removed from a university lab w (more)here it was surplus to requirements. The unit powers up and is in good cosmetic condition with marks from use. Included with ti are; 17x Fiber Optic Cables: 1x - 05/97 TB II4x - 06/97 TB II5x - 09/97 TB II1x - 10/97 TB II6x - 12/97 TB II Length - 319cm&nbsp; The units are in good cosmetic condition.

Job Lot of Miscellaneous Microscope Parts And Laser Parts This job lot of items come from a universi (more)ty, where they were surplus to requirement. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.