Leica CLS 100 X Kaltlichtquelle Cold Light Source Duplex Light Guide Lichtleiter

ÄKTAxpress is a liquid chromatography system intended for automated, multi steppurification processe (more)s. The system has been developed and optimized for purificationof Histidine-tagged and Glutathione S-Transferase (GST)-tagged recombinant proteins from clarified or crude cell lysates. ÄKTAxpress supports a number of purification protocols containing up to four chromatography steps, for example, affinity chromatography followed by desalting, ion exchange, and gel filtration. Protocols for purification of both low expressed proteins and well expressed proteins are included. Also protocols supporting purification of double tagged proteins and protocols that can be combined with on-column and off-line (batch) tag cleavage are provided. ÄKTAxpress provides the following features: •Automatic purification of up to four samples in a single run. •Purification protocols containing up to four chromatography steps. •Automated on-column affinity tag removal in the first step of purification protocols starting with an affinity/ion exchange chromatography step. •Purification protocols supporting purification of both well expressed and low expressed proteins, double tagged proteins and proteins that have been cleaved off-line. •Up to 50 mg of protein can be purified per sample. •Up to twelve ÄKTAxpress systems can be run in parallel, controlled from one computer (not included). Different purification protocols can be run simultaneously. •The systems can be placed next to each other or they can stand separately if preferred. Flow rate: 0.1 – 65 mL/min Flow rate accuracy: ±2% or ±0.02 ml/min whichever is greater Flow rate reprocibility: RSD < 0.5% Pressure range: 0 – 30 bar Step gradients (quasi-isocratic mixing) formation conditions: Water based buffers with different concentrations of salts Gradient mmix proportions: 5 – 95% Concentration accuracy: ±2%B Linear gradients conditions: Water based buffers with different concentrations of salts Linearity: ±2%B within 20 – 80%B UV monitor wavelengths: 280 and 254 nm set by lamp position and filter Optical path length: 2 nm Opitcal cell volume: 2 µL Detector cell volume: 30 µL Absorbance range: 0.01 – 5 AU Auto zero range: -0.2 – 2.0 AU Linearity, deviation: < 3% up to 2 AU Static noise, short and long term: < 40 μAU Static drift: ±0.1 mAU/h Conductivity range: 0.01 – 300.00 mS/cm Accuracy: Max. ±2% of full scale calibrated range or ±0.1 mS/cm whichever is greater Reproducibility, short and long term: Max. ±1% or ±5 μS/cm whichever is greater Noise: Max. ±0.5% of full scale calibrated range, typically ±0.1% Response time: Max. 4 s (0–95% of step) Internal volume: 24 μl Dimensions (WxdxH): 250 x 490 x 660 mm Weight: 30 kg

Dimensions (WxDxH): 600 x 490 x 430 mm

Labconco 4-Port Manifold, 8.6" w x 8.6" d x 11.2" h Type 304 stainless steel manifold 4 neop (more)rene valves with plastic knobs accommodate both 1/2 in. and 3/4 in. adapters For use with 1L, 2.5L, 4.5L, 6L, 8L, 12L, or 18L FreeZone Freeze Dryers Freeze Dryer, glassware, and adapters are required (not included) Includes one latching pin INCLUDED: The Labconco 7201700 4-Port Manifold, 8.6" w x 8.6" d x 11.2" h includes: - Latching Pin - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Thermo Scientific Sorvall Culture Flask Adapter 75008383 This was removed from a working lab where  (more)it was surplus to requirements. The item is in brand new condition in its original packaging.For processing Nunc™ T-75 or T-25 EasyFlasks™ in Thermo Scientific Sorvall Legend™ T/RT Centrifuges.

This Don Whitley VA500 Hypoxia Workstation Glove Box was removed from a university lab where it was  (more)surplus to requirements. The lab were unable to confirm the working status as it has not been used in some time, but did confirm that it requires a software upgrade. The unit powers up and the incubator is in working order. It has not been tested under vacuum. The lights are functional on both units. Glove door locks both working. The left glove insert is damaged. Rubber has separated from the ring. Both units are in good cosmetic condition. The back of Airlock does have some cracking on the external casing due to UV exposure. The unit was situated by a window at the university which caused this. Included with the system are; 1 x User manual folder for both units. 1 x "MACS Footswitch". it is in good cosmetic condition but we were unable to test it. It is wireless. 2x Gas regulators. Good condition, not tested.P/N - 4127822-01-B03S/N - 1350P4HRS/N - 1370Q7TV

LGC Biosearch Technologies Araya + Tape Counter Lab This item was removed from a university where it (more) was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Includes the following: Biosearch Technologies Tape Counter Model- TC1412S/N- C521002 5L Water Supply Bottle With PumpModel- DS-AC2102S/N- 1210242 The table the item sits on is included.

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.

Julabo CORIO CP-BC26 Heating Circulator, 115V/50-60Hz Working Temperature Range 20°C - 200°C Heating (more) Capacity 1000W Fluid Type Water, Silicone Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over between internal and external circulation - USB &amp; RS232 connection - High-quality bath tanks made of stainless steel with bath lid and drain tap - Integrated cooling coil for counter-cooling CORIO™ CP heating circulators are suitable for temperature applications to 200 °C with circulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CP circulator incorporates easy change-over for control of fluid circulation internally or externally.Pump inlet/outlet fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. Systems include insulated stainless-steel tanks with integrated cooling coil and drain ports. Bright LED display with easy to use interface including USB and RS232 connections for external PC control and data-logging. PID temperature control provides ±0.02 °C stability. Adjustable centrifugal pump capacity of 8-27 L/min with pressure from 1.5-10.2 psiClass III (FL) according to DIN 12876-1INCLUDED: The Julabo CORIO CP-BC26 Heating Circulator, 115V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Bath Lid - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 1 x 80-120ml Adapters, Cat. # 022638424 The Eppendorf 1 x 80-120ml Adapters, Cat. # 022638 (more)424 are for use with the Eppendorf A-4-62 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 1 x 80-120ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 45mm x 138mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 1 x 80-120ml Adapters, Cat. # 022638424 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 1 x 80-120ml Adapters, Cat. # 022638424 SpecificationsBottom ShapeFlat with Rubber MatRotor CompatibilityEppendorf A-4-62 Swing Bucket Rotor