Easily list your scientific equipment

Top suppliers for laboratory & industry

New and used instruments

Marketplace

Analytics

Brand

Labconco

Supplier

Marshall Scientific

Location

Hampton - United States

Price

$16,593.00

(ex. VAT)

This item is

for sale

State of item

new

Labconco 412101000 FlaskScrubber Glassware Washer, freestanding with window, 115V, 60Hz

Marshall Scientific$16,593.00 (ex VAT)

Description by the supplier

Labconco FlaskScrubber Glassware Washer, freestanding with windowProvide thorough, efficient, andeconomical cleaning that meets demanding laboratory standards by outfittingyour lab with a Labconco FlaskScrubber™ Glassware Washer.Ideal for college and university,government, pharmaceutical, and industrial labs or any facility utilizingreusable glassware. Choose from single-rack FlaskScrubber series models ordual-rack SteamScrubber models. Accessory spindle and open racks are designedspecifically for laboratory glassware and are interchangeable between models.Operating Features

Achieve higher water temperatures for enhanced washing, faster drying, and sanitizing

LCD information center for customizing cycles and monitoring operations, including internal water temperature (C or °F) and alarms

High water circulation rates for thorough cleaning: 96 gal./min. (363L/min.) when operated on 115V 60Hz, and 112 gal./min. (424L/min.) on 230V 50/60Hz

Dual pumps: one for washing and one for draining, to reduce potential for cross-contamination

Built-in purified water pump brings unpressurized or pressurized purified water into tank for up to six pure water rinses

Built-in steam generator produces hot vapor to penetrate and remove dried residue for cleaner glassware

Manual-fill dispensers for detergent (powder or liquid) or rinse aid solution

Two user-set cycle programs

User-set delayed start (up to 8 hours)

Optional tempered safety glass viewing window with 25w interior light

Environmentally Friendly: Item contains environmental attributes or features (e.g. water conserving, lead-free, etc.) as described in the item detail

Structural Features

Type 304 brushed stainless-steel door, tank, and upper and lower wash arms

Freestanding models have stainless-steel exterior sides and top

One-piece, stainless-steel, fine mesh particle drain filter traps debris in tank to protect pumps

Four leveling feet

0.375 in. female NPT inlet fitting for hot water tap connection

Factory-installed drain hose and band clamp

Outfitted for washing narrow-necked flasks

Supplied with one Type 304 stainless-steel spindle rack with 36 detachable large spindles, 18 holders, 36 clips, and 10 interchangeable small spindles

Built-in forced-air drying through the spindles and throughout the tank up to 99 min. and programmable from 38° to 70C (100° to 150°F)

Factory-set cycle programs: For 208/230V models, 10 (add INTENSE, INTENSE PLUS and EXTREME)

Click Here to View Product Video

INCLUDED:

The Labconco 412101000 FlaskScrubber Glassware Washer, freestanding with window, 115V, 60Hz includes:

- Lower Spindle Rack w/ Glassware Holders

- Small Spindle Accessory Kit

- Leveling Feet x 4

- Screws x 2

- Hose Clamp

- Drain Hose

- Operator's Guide

- Manufacturer's Documentation

- 2 Year Manufacturer's Warranty

Product details

Electrical Requirements	115V 60Hz 16A
Dimensions	24.2” w x 27.5” d x 34.2-36.2” h 61.5 x 69.9 x 86.9 – 91.9 cm
Includes	One spindle rack, glass viewing window, 25w interior light
Inlet Water Temperature (English) Min.	120°F
Inlet Water Temperature (Metric) Max.	82C
Inlet Water Temperature (Metric) Recommended	60C
Max. Pressure	20 to 120psi for hot tap water pressure at washer
Product Type	Freestanding FlaskScrubber™
Weight (English) Shipping	239 lb.
Certifications/Compliance	UL 61010-1, CAN CSA C22.2 No. 61010.1, ETL
Flow Rate	4.7L/min. for hot tap water, 3.4L/min. for purified water
Inlet Water Temperature (English) Max.	180°F
Inlet Water Temperature (English) Recommended	140°F
Inlet Water Temperature (Metric) Min.	49C
Material	Type 304 Stainless Steel
Min. Purified Water Pressure	0psi
Water Consumption	13L/Fill

About QuestPair

QuestPair matches professionals in research and industry with manufacturers, suppliers and resellers of scientific products. Companies and organisations can easily sign up for an account and showcase their laboratory equipment and other products on the marketplace. It is possible to list both new as well as used equipment. QuestPair features a variety of equipment for the physical, chemical and life sciences such as spectrometers, balances, centrifuges, testing devices, medical devices, incubators, microfluidics kit, heaters, coolers and other specialist instruments.

Related items:

Tohnichi BTG150CN Torque Tester Bidirectional 0.2 - 1.5 NM Drehmomentprüfgerät

Manufacturer: Tohnichi Co. Ltd Model: BTG150CN Torque Tester (Bidirectional), 0.2 - 1.5 NM Descripti (more)on: Torque Range :0.2 - 1.5 NMOverall Length : 135mmBTG Analog Torque Gauge: Compact portable handheld design. Top and side scales for easy reading. Three fingered keyless chuck. Technical Specifications: Min Torque: 0.2 NmMax Torque: 1.5 NmManufacturer: TohnichiWeight: 0.01 lbsWrench Type: Bidirectional Torque GaugeManufacturer Part Number: BTG150CNStock Code: BOverall Length: 135 Items delivered: – BTG150CN Torque Tester- Transport Case The torque tester is in very good cosmetic condition and 100% functional tested. Last Calibration 12/2016

€300.00 ex VAT

€357.00 incl. VAT if applicable

Germany

general laboratory equipment other

Genevac Rocket Synergy Centrifugal Evaporator Concentrator FL601 Chiller System 6x450ml

Manufacturer: Genevac Model: Rocket Synergy Evaporator with Vacuum Pump and Julabo FL601 Chiller P/N (more): RKTS-23050-SNN S/N: RK0488 MfG: November 2015 Descripton: The Rocket Evaporator is designed to dry or concentrate up to six 450ml flasks, or 18 ASE® tubes. The user is able to focus on other tasks, confident that the Rocket will achieve perfect, reproducible results every time. The Rocket Evaporator is equipped with the advanced performance features that Genevac users expect, such as effective bumping and cross contamination protection, precise temperature regulation and very easy to use controls. A two stage cold trap is built into the Rocket Evaporator, providing very high levels of solvent recovery, even with volatile organic solvents. The cold trap auto-drains under the control of the evaporator to ensure that optimal solvent recovery is maintained, no matter what mix of solvents is being used. The Rocket Evaporator can be used either to dry samples completely, or to concentrate them to a small volume. To help achieve the best results in the desired sample format, there are several options: 1) Evaporation Flasks: These are for drying or concentrating samples – if dried, samples require re-dissolving and then removing via pipette. 450ml volume. 2) SampleGenie™ Flasks: For a wide range of vials, from 12mm to 28mm diameter and up to 70mm tall. The SampleGenie system allows drying of the sample directly into the storage vial. 250ml (plus vial) volume. 3) SampleGenie™ for GC Vials: Specifically for concentrating into GC autosampler vials, this special version of SampleGenie insulates the vial so that only the solvent in the flask evaporates, leaving a small volume in the vial. 4) Puck for ASE® Tubes: The Puck insert replaces the flasks and allows up to 18 ASE® tubes to be evaporated at one time. 5) Flip-Flop system: Samples are collected directly from the extraction system in the special double-ended tube. A SampleGenie adaptor with GC vial is then fitted. The tube is flipped over and placed into the Puck in the Rocket Evaporator and the cap removed. The samples are then concentrated directly into the GC vial.Specifications: Mechanical dataMaximum speed: 1800rpmMaximum G-force: 700gDrive system: Direct driveMaximum Sample load: 6 x 450mlMaximum imbalance: 50g Vacuum systemPressure display: 0-1200mbarPressure control: Automatic, 3mbar to atmosphereSystem ultimate vacuum: 3mbarBumping protection: Dri-Pure® Temperature and controlControl range: Ambient +5°C to 60°CControl accuracy: ±1°CTemperature sensing: via thermistorDisplay range: 0°C to 60°CEnd of method: Time or automaticVisualisation: Via built in strobe (optional) Solvent compatibilityBoiling point range: 40°C to 160°C at ambientIncludes: Alcohols, DCM/methylene chloride, DMF, ethyl acetate, water, TFA HCl: Not compatibleDi-ethyl ether: Only with Inert Gas Purge option DimensionsWidth x Depth x Height: 720 x 640 x 530mmHeadspace required: 755mm (lid open)Weight: 75kgMains: 230V (±10%), 50Hz, 13A Specifications Julabo FL601 Chiller/Cold Trap: Width x Depth x Height : 320 x 500 x 600mmWeight: 48kgCooling Power: 500W at 10°C Items delivered: - Genevac Rocket Evaporator - Julabo FL601 Chiller / Cold Trap- (1) Rocket Evaporator- 6x Flask Plugs- Condenser Drain Tubing- Waste Jug- Connection Cable RS232- 6x Glass Flasks w/ Collar & Pad- 1x Balance Nest- Flask Rack- Instruction Manual as PDF via E-Mail The Genevac Rocket Evaporator is in excellent cosmetic as well as technical condition - 100% functional tested.

€16,500.00 ex VAT

€19,635.00 incl. VAT if applicable

Germany

general laboratory equipment other

Zeiss 423302 Lightguide Illumination Adapter Beleuchtungsadapter für Lichtleiter

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOL (more)LOW

€275.00 ex VAT

€327.25 incl. VAT if applicable

Germany

general laboratory equipment other

Beckman Coulter CH-3.8 / CH-3.8A Round Bucket 2x 668g

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€250.00 ex VAT

€297.50 incl. VAT if applicable

Germany

general laboratory equipment other

IUL Flash & Go Automatic Colony Counter Automatischer Koloniezähler

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€1,500.00 ex VAT

€1,785.00 incl. VAT if applicable

Germany

general laboratory equipment other

Schott Ringlicht

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€150.00 ex VAT

€178.50 incl. VAT if applicable

Germany

general laboratory equipment other

People are watching right now:

AREC.X 7 Velp system with probe

The system includes: pt100 probe (code A00000268), magnetic stir bar Ø8x40 mm (code A00000356). Magn (more)etic stirrer AREC.X 7 Precise and accurate thermoregulation for better reproducibility AREC.X 7 is equipped with state-of-the-art heating plate technology, designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. The AREC.X 7 can be connected to the external Pt100 probe or to the VTF for precise thermoregulation of the fluid. The probe guarantees thermoregulation up to 250°C, with an accuracy of ± 1.0°C, while the VTF guarantees excellent thermoregulation performance up to 300°C and an accuracy of ± 0.5°C. The VTF is equipped with a timer, for unsupervised operation and increased productivity. Powerful stirring for your lab reactions You can rely on the AREC.X 7 for demanding laboratory reactions, as it agitates volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. Absolute safety and ease of use for laboratory operators The AREC.X 7 hotplate stirrer guarantees a superior level of safety and protection for laboratory operators, since it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic soleplate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. Save time with the new control panel Thanks to the digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood.

€492.00 ex VAT

€585.48 incl. VAT if applicable

Italy

general laboratory equipment other

VACUUBRAND MZ 2C NT +2AK Chemistry Vacuum System

VACUUBRAND MZ 2C NT +2AK Chemistry Vacuum System Ultimate Vacuum 7 mbar / 5 torr Maximum Pumping Spe (more)ed 1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance. - High performance even at low vacuum levels. - Optimized vacuum even with gas ballast for condensate purge. - Whisper quiet and very low vibration. - Separators at inlet and outlet to collect condensates. This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors in chemical, biological and pharmaceutical laboratories where there are no requirements for condensation of solvent vapors at the outlet. Typical applications are vacuum concentrators, gel dryers and filtration. The separator at the inlet (AK), made of glass with protective coating, retains particles and liquid droplets. The separator at the outlet collects condensate, avoids condensate backflow towards the pump, and reinforces the whisper-quiet operation of the pump. INCLUDED: The VACUUBRAND MZ 2C NT +2AK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

$4,644.00 ex VAT

United States

general laboratory equipment other

Polyscience SD15H170-A11B 15L Heated Circulator, Standard Digital (Ambient +10 to 170C), 120V, 60Hz

Polyscience SD15H170-A11B 15L Heated Circulator, Standard Digital (Ambient +10 to 170C), 120V, 60HzP (more)olyScience Circulating Bath with Standard DigitalTemperature Controller. Extremely easy to use and maintain, it combines designinnovation with highly intuitive operation to deliver convenient and reliableliquid temperature control for a wide range of applications.Features Large, universal icon and English display Swivel 180™ Rotating Controller On-board connectivity: RS-232 serial output On-screen prompts Automatic performance optimization Single-point calibration capability INCLUDED: The Polyscience SD15H170-A11B 15L Heated Circulator, Standard Digital (Ambient +10 to 170C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

$2,928.00 ex VAT

United States

general laboratory equipment other