KGW Isotherm 11L FB 1 L CAL Dewar Flask Container Gefäß

Under-bench cabinet depth 45cm - Length 102cm Laboratory cabinet Length: 102cm Depth: 45cm Height: 6 (more)7cm In melamine 2 doors On casters (hidden by the finishing profile) Average condition of the cabinet and worn casters

Yamato WA-301R Auto Pure Remote Dispense Type 1 Water Purification System, 120V Configuration Remot (more)e Dispense Flow Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, remote dispense configuration water purification system in 120V producing Type 1 deionized water. Low cost of ownership. Water is purified using a stage purification process which includes high-purity ion exchange resins to remove dissolved minerals and internal recirculation to maintain purity. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WA-301R Auto Pure Remote Dispense Type 1 Water Purification System, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The system includes: pt100 probe (code A00000268), rod (code A00001069) and clamp (code A00000280);  (more)magnetic stir bar Ø8x40 mm (code A00000356). AREC 7 CONNECT MAGNETIC STIRRER AREC 7 Connect features state-of-the-art heating plate technology, designed by VELP, which ensures temperature homogeneity, thermal efficiency and long-lasting heating performance. AREC 7 Connect can be connected to the external Pt100 probe for precise thermoregulation of the fluid, being ideal for temperature-sensitive applications in Chemistry, Biotechnology and Pharmaceuticals. The probe guarantees stable and precise thermoregulation up to 300°C, with an accuracy of ± 0.5°C. Powerful stirring for all your lab applications Thanks to the powerful magnetic coupling, you will have the possibility to stir up to 20 liters (H2O), from 30 up to 1700 rpm (aqueous solutions), ideal characteristics for any type of application, chemical, pharmaceutical and microbiological. In addition, the SpeedServo ™ technology, designed by VELP, will keep the speed constant as the viscosity changes. Absolute safety and ease of use for laboratory operators The AREC 7 Connect hotplate stirrer guarantees a higher level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. Save time with the new control panel Thanks to the double digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature and the stirring speed. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1700 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood. Programmable operation for excellent laboratory efficiency AREC Connect is equipped with some exclusive and extremely advanced features that optimize unattended operation, easily usable, thanks to the intuitive display: - Integrated timer to suit your lab workflow - 1 min to 99 h 59 min (1 min steps) - Autorverse of the stirring direction which guarantees advanced mixing capabilities - from 5 s to 99 min and 59 s (1 s steps) - Programs in intermittent mode for better scheduling of unattended operations - from 5 s to 99 min 59 s (1 s steps) - Acoustic signals for timers and alarms - Safety lock function to avoid possible alterations of the working conditions VELP ERMES: FROM USER WORK MANAGEMENT TO DATA-RICH PROCESSES AREC Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP service centres.VELP ERMES: FROM USER WORK MANAGEMENT TO PROCESS DATA-RICH AREC Connect has built-in Wi-Fi technology to connect to the VELP Ermes Cloud Platform, the perfect solution for your Smart Lab. VELP Ermes Cloud Platform allows the reduction of daily manual activities and repetitive operations thanks to the real-time monitoring and control of your AREC Connect. By simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analytical data and share reports with your colleagues; receive immediate notifications of remote events and alarms; record data and insights to improve productivity and reproducibility. Connecting your AREC will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of assistance from authorized VELP assistance centres.

VG Scientific Wien Mass Filter for Ion Beam Filtering UHV This was removed from a university lab whe (more)re it was surplus to requirements. It is in good cosmetic condition but has not been tested.

EG&G Polarographic Analyzer System Model 384B with 303A Dropping Electrode These were removed fr (more)om a university lab where they were surplus to requirements. Both units have been powered up but we were unable to test them further at our facility. Included are; 1x EG&G Polarographic AnalyzerModel 384BThe unit powers on and is in good cosmetic condition. 'BLANK SWV' appeared on the screen after the analyser had powered up. None of the buttons appeared responsive. 1x EG&G Stating Mercury Dropping Electrode (SMDE, DME, HMDE)Model 303AThe unit powers on and is in good cosmetic condition. We were unable to test it. Accessories: 1x EG&G Operating DisketteRevision: F0The unit is in good cosmetic condition. The diskette goes into the back of the polargraphic analyser in the disk drive. 'BLANK SWV' appeared on the screen after the analyser had powered up. 1x EG&G Polargraphic Analyzer user manual 1x EG&G StirrerModel 305The unit powers on via the SMDE and is in good cosmetic condition.The stirrer works in MANUAL mode, and both the slow and fast speeds are working. We could not get the stirrer to work in AUTO mode. 2x Ametek Data DiskModel 394Rev 2.01The units are in good cosmetic condition, they are not compatible with the unit. more likely for a PC, 7x 25ml Glass cupsThe units are in good cosmetic condition 5x 50ml Glass cupsThe units are in good cosmetic condition. 1x Ribbon cables RS232The unit is in good cosmetic condition 1x Cell compartment controller cableThe unit is in good cosmetic condition,it provides power from the 384B Analyser to the 303A SMDE

Scilogex MX-M Microplate MixerThe Scilogex MX-M Microplate Mixer is ideal for mixing or shaking 96 w (more)ell microplates. The mixer's high speed and small orbit combine to offer vortexing action in each well of the microplate for complete and uniform mixing. Click Here to View Product Video INCLUDED: The Scilogex MX-M Microplate Mixer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris AccuCheck Pipette Calibration System (W3002A-120 Balance with W3110 Anti Evaporation Trap) T (more)he Benchmark Scientific W3002A120ACS Accuris AccuCheck Pipette Calibratlon System combines the W3002-120A touch screen analytical balance with an anti evaporation trap accessory and built-in pipette calibration software. Together, this standalone pipette calibration system is easy for any lab tech to use for the ISO 8655 method of pipette calibration for variable volume pipettes from 10µL to 10ml. The W3002-120A has a large, high resolution touch screen that presents the user with an icon based menu system to allow quick and intuitive access to a wide range of useful functions. A precisely engineered Electromagnetic Force Restoration (EFR) weigh cell accurately determines masses to sub milligram levels. The user interface of the AccuCheck™ software is intuitive and requires no special training to use. Individual pipette details (brand, model, serial number) can be saved in the internal data base for current and future calibrations. The software walks the user through all steps of the gravimetric method, allows input of water temperature, air temperature, pressure, and humidity. It saves the weight values, and then automatically performs all calculations for accuracy and precision at minimum, middle and maximum volume settings. The internal calibration system helps ensure that the balance is always calibrated and ready for use. Auto calibration can also be set to occur at specific time intervals depending on user preference. A high resolution thermal probe is incorporated in the core of the EFR weigh cell, and if measured temperature fluctuates slightly, the balance will automatically compensate. Offering a maximum capacity of 120g, readability of 62g x 0.01mg / 120g x 0.1mg, and automatic internal calibration, the W3002-120A balance is a favorite for labs needing fast and accurate weight determinations. The Anti Evaporation Trap greatly improves results when performing the gravimetric method by preventing unstable measurements due to evaporation loss. Removing the Anti Evaporation Trap also allows the W3002-120A balance to be used for general weighing applications. A USB port on the side accepts a flash drive for the storage of weighing data, which can then be transfered to a computer. W3002-120A has adjustable feet and a leveling bubble to ensure correct installation. (Note: For optimal weighing performance, the W3002-120A semi micro model must be installed on a suitably stable surface such as a marble slab table.) Academic, research and industrial labs require accurately calibrated pipettes to achieve meaningful results, and all mechanical pipettes require calibration on a regular basis. The W3002A-120ACS gives any lab the freedom to calibrate pipettes quickly and when required.INCLUDED: The Accuris AccuCheck Pipette Calibration System (W3002A-120 Balance with W3110 Anti Evaporation Trap) includes: - W3002A-120A Analytical Balance with built in Calibration Software - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty