IKA EURO-ST P CV 6000 EUROSTAR Rührwerk Overhead Stirrer

12 x Packs of 10 Lonza Reagent Reservoirs CN 00190035 These were removed from a university lab wher (more)e they were surplus to requirements. The units are brand new and sealed. Expiry dates are as follows: 21st September 2025, 25th April 2025

Microtip probes are available in tapered and stepped configurations and are designed to process samp (more)les contained in small diameter vessels at extremely high intensity (refer to chart for recommended volumes). Tapered microtips screw into standard 1/2" step horns with tapped ends. The double stepped microtip consists of a coupler and a stepped tip and screws directly into the converter. It has lower amplitude than the tapered tip, but is capable of reaching into small diameter vessels of greater depth and can process solutions down to 0.1 mL. Typical Applications: - Micro-tapered is recommended for processing spores, fungi, yeast, muscle, and connective tissue. - Double Stepped Microtip –is recommended for red and white blood cells, tissue culture cells, HELA cells, and cells which have a low to medium resistance to breakage. Attaches to converter only. For use with Branson SFX250, SFX550, 250 & 450 Sonifiers .Only attach Microtip to Disruptor horn; attach 2-piece. Double-step Microtip to converter only. Tip Diameter 1/4” (6.5 mm) Intensity High Ampl. Range 59.5 - 247 Volume 10 - 50 ml

RET control-visc white Speed Range 50 to 1,700 rpm Temperature setting range 0 - 340 °C Setting accu (more)racy speed 10 rpm Features - BNC socket for connection of a pH electrode - Adjustable temperature control mode: rapid heating and very accurate temperature control - Dual sensor for simultaneous control of heat transfer fluid temperature and medium temperature - Timer and countdown functions - Display of viscosity change trend - Detached magnet detection - Intermittent operation - Several modes of operation available - Safety circuit adjustable from 50 to 380° - Transparent protective cover included - Error code display for easy troubleshooting - Exact temperature and speed adjustment by means of digital display; even when function switched off - Suitable for unsupervised operation - Sealed casing (IP 42) ensures a long service life - Automatic switch-off of the heating function if the connected external temperature sensor is not immersed in the medium. Function selectable, timeout time adjustable (Error 5) PATENTED WORLD FIRST: Safety magnetic stirrer with heating and integrated balance. Clear, multilingual TFT display makes it easy to set all parameters. Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. PT 100 temperature sensor is included. The stainless steel composite hot plate with white ceramic coating, reaching a temperature of 340 °C, enables rapid heating and very good chemical resiatance. RS 232 and USB interfaces enable pc control of the magnetic stirrer and documentation of all test parameters. "Lock" function prevents inadvertent changes of speed and temperature settings. As a safety feature, the current temperature is displayed when the unit is switched off but surface is still hot. Below 50 °C the display turns off automatically.INCLUDED: The RET control-visc white includes: - RET control-visc white - PT 100.70 Temperature sensor - IKAFLON® 30 Magnetic stirring bar - IKAFLON® 40 Magnetic stirring bar - Screw driver - H 104 Cover for RET control - USB Cable - USB A to Micro-B, 2 m - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This compact device is the ideal external light source for fluorescence excitation in microscopy. Co (more)upling is preferably achieved via liquid light guides. The average service life of a lamp is 2,000 hours. The optimised internal air flow cools the lamp and enables quiet operation. A resettable operating hour meter shows lamp operating hours. The brightness of the lamp output can be varied in 5 steps (0-100%) by means of a mechanical dimmer unit. An ultra-fast shutter opens or closes after activation with approx. 6 ms. The shutter is actuated by means of an appliance switch, but is also possible externally by means of a remote control input or CAN-BUS connection. Equipped with a VIS-Lighting adapter. Dimensions (HxWxD): 210 x 130 x 290 mm Weight: 4,7 kg

Refrigerant R290 Working Temperature Range -25/ -10 °C (-77 / -50 °F) Capacity 49.44 Cu. FT (1400L (more)) Features - Superior performance and temperature stability - High-quality Carel digital controller - Data logger with Bluetooth and NFC interface - High / Low temperature warning alarm - Open door alarm - Power failure alarm (visual and acoustic) - LED inside light (refrigerators models) - Forced air ventilation - Port hole - UL61010 certification - Energy Star rating - 115V/60Hz power - Sizes available from 14.12 cu.ft. up to 49.44 cu.ft. Arctiko LF 1350 -10C / -25C Upright Biomedical Freezer The Arctiko LF 1350 high-capacity upright freezer offers the superior features required for biomedical applications. This model includes a high-quality Carel controller with Bluetooth connection as well as high/low temperature alarms and a built-in data logger.INCLUDED: The Arctiko LF 1350 -10C / -25C Upright Biomedical Freezer includes: - Key for Door Lock - Shelves - Power Cord - Two Year Manufacturer's Warranty

Hermle 50ml Inserts for Z326-100H Rotor (2pk) The Hermle 50ml Inserts are for use with the 4 x 100H  (more)Swing Out Rotor for the Z326 and Z326 K centrifuges. The Hermle 50ml Inserts for Z326-100H Rotor (2pk) are discounted, brand-new, and includes free shipping with a 3 year warranty. These adapters are ready for immediate shipment.

Eppendorf Research Plus 3 Pipette Kit, 0.5 to 1000uL Adjustable or Fixed Volume Adjustable Volume Ra (more)nge 0.5 to 1000uL Pipette Type Air Displacement Features - Mechanical air-cushion pipette with standard 3-button operation (one operating element for volume selection, one for pipetting, and one for tip ejection) - Ideal for accurate, easy, and ergonomic manual pipetting of aqueous solutions - Feel the difference in weight and pipetting forces: Designed according to the Eppendorf PhysioCare Concept® principles - Benefit from one of the lowest operating and tip ejection forces on the pipette market, helping to reduce hand and arm strain - Enjoy minimal tip attachment forces due to a spring-loaded tip cone (available for all pipettes up to 1 mL) - Temporarily adjust your pipette in seconds for better accuracy when pipetting challenging liquids like ethanol or when pipetting at high altitudes. Return to factory adjustment without calibration - Autoclave the entire pipette or only the lower part according to your needs and applications to ensure a proper decontamination - Premium material ensures a high UV and chemical resistance; special single-channel lower parts for aggressive chemicals available - ACT®-labeled single-channel pipettes and epT.I.P.S.® pipette tips help you make an informed choice when it comes to sustainability The Eppendorf Research Plus 3 Pipette Kit offers an ergonomic and lightweight solution for precise manual pipetting. This kit features a mechanical air-cushion design with a standard 3-button operation, facilitating volume selection, pipetting, and tip ejection. It is engineered to minimize strain with one of the lowest operating and tip ejection forces available, thanks to its compliance with the Eppendorf PhysioCare Concept®. The spring-loaded tip cone ensures minimal attachment forces for pipettes up to 1 mL, enhancing user comfort. Adjust the pipette quickly for specific needs like pipetting challenging liquids or working at different altitudes, with an easy return to factory settings without recalibration. Each component, from the pipette to the lower part, can be autoclaved for thorough decontamination. Made with premium materials, these pipettes offer high UV and chemical resistance, and they are available with single-channel lower parts designed for aggressive chemicals. The ACT® label on single-channel pipettes and epT.I.P.S.® pipette tips highlights their eco-friendly attributes. These durable, intuitive pipettes feature 4-digit displays and color coding for easy selection, providing a dependable and sustainable option for daily laboratory tasks. INCLUDED: The Eppendorf Research Plus 3 Pipette Kit, 0.5 to 1000ul includes: - 3 Single-Channel Pipettes (0.5 - 10 uL, 10 - 100 uL, and 100 - 1000 uL) - 3 x epT.I.P.S Pipette Tips Boxes (x 96 tips, 20 uL M, 200 uL, 1000 uL) - Operator's Manual - Manufacturer's Documentation - 6 Month Full Parts and Labor Warranty Eppendorf Research Plus 3 Pipette Kit, 0.5 to 1000uL SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeAir DisplacementPipette Volumes0.5 to 10 uL (adjustable in 0.01 uL increments)10 to 100 uL (adjustable in 0.1 uL increments)100 to 1000 uL (adjutable in 1 uL increments)Maximum Systematic Error0.5 to 10 uL: ± 8% (± 0.1 uL)10 to 100 uL: ± 3% (± 0.5 uL)100 to 1000 uL: ± 3% (± 6 uL)Maximum Random Error0.5 to 10 uL: ± 5% (± 0.04 uL)10 to 100 uL: ± 1% (± 0.15 uL)100 to 1000 uL: ± 0.6% (± 2 uL)Pipette SeriesResearch PlusDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote .features-side img{height:500px;}

The autoclave is suited as a universal autoclave for demanding sterilization tasks. The autoclave is (more) intended for use in  the medical field, e.g. in general physician and dental practices. The autoclave is not approved for the sterilization of liquids. Programs Universal Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 5:30 min, Operating time: 30 min, Drying: 20 min Quick program B: Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 5:30 min, Operating time: 30 min, Drying: 10 min Quick program S: Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 3:30 min, Operating time: 30 min, Drying: 5 min Gentle program: Sterilization temperature: 121°C, Sterilization pressure: 1.1 bar, Sterilization time: 20:30 min, Operating time: 45 min, Drying: 20 min Prion program: Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 20:30 min, Operating time: 45 min, Drying: 20 min Chamber dimensions (⌀xD): 250 x 350 mm Capacity: 17 L Dimensions (HxWxD): 490 x 425 x 620 mm Weight: 55 kg

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.