IKA DB 2.2 Conical Tube Dry Block (50 ml)

Scilogex DS-160/5 Generator Probe for D-160 The Scilogex DS-160/5 Generator Probe for D-160 has a di (more)ameter of 5mm x length 50mm for solid/liquid media volumes from 0.1-50ml. To be used with D-160 Homogenizer.INCLUDED: The Scilogex DS-160/5 Generator Probe for D-160 includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Temperature range: +20 to 100°C Temperature stability: ±0.03°C Temperature display resolution settin (more)g: 0.1°C Temperature display resolution: 0.01 – 0.1°C Minimum filling height below the top of the bath: 45 mm Minimum depth bath tank: 150 mm Dimensions (WxDxH): 132 x 160 x 362 mm Weight: 1.9kg

Detection Modes: Fluorescence Intensity – including FRET Fluorescence Polarization Luminescence  (more)(flash and glow) Time-Resolved Fluorescence – including DELFIA UV/Vis absorbance Measurement Modes: Top and bottom reading Endpoint and Kinetic measurements Sequential Multi Excitation measurements Sequential Multi Emission measurements Simultaneous Dual Emission measurements Ratiometric measurements Well Scanning Microplate Formats: 6 to 384-well plates, user-defi nable Microplate Carrier: Accomodates two plates: one reagent plate and one measurement plate Light Source: High energy xenon flashlamp Detectors: Side window photomultiplier tube Optical Filters: Excitation and emission filter wheels for 8 filters each Spectral Range: 240 to 740 nm or 240 to 900 nm Sensitivity: FI: < 1 fmol / well Fluorescein FP: < 5 mP standard deviation at 1 nM fluorescein TRF: < 70 amol/well Europium LUM: < 30 amol/well ATP, DLReady certified ABS: Dynamic range: ±0.000 – 4.000 OD, Reproducibility: ±0.010 OD for 0 – 2 OD range Read Times: Flying mode: 14 s (96), 27 (384) Reagent Injection: Up to 2 built-in reagent injectors Injection at measurement position (6 to 384-well) Individual injection volumes for each well (3 to 350 µL) Variable injection speed up to 420 µL / s Up to four injection events per well Reagent back flushing Pipettor System: Injection volume: 0.5 µl – 100 µl Individual injection volumes for each well Variable injection speed Plate-to-plate transfer + 3 reagent stations + washing station Shaking: Linear, orbital, and double-orbital with user-defi nable time and speed Gas Vent: System to inject an atmosphere or to pull a vacuum into the reader Incubation: +5°C above ambient up to 45°C or 60°C Equipped with the following filters: Em: 510 – 520 – 530 – 590 – 630 nm Ex: 355 – 390 – 405 – 436 – 440 – 485 – 510 – 544 nm Dimensions (h x w x d): 300mm x 780mm x 530mm Weight: 55 kg 230V / 50-60Hz

A hardness tester according to the principle of “Brinell”, type Pessimetro S2, in combination with a (more) large surface table. The hardness of materials with a thickness of max. 10 mm. can be tested by means of 5 different (in size) pressure bodies with a fine adjustment of 100 gr – 20 kg. force can be applied. The size of the impression is measured digitally using a Mitutoyo 543-250B (in 0.001 mm.). The hardness of the material is then calculated in (kgf) and the area of the indentation. Compression bodies: 1.5 mm. / 11 mm. / 30 mm. Dimensions table (WxHxD): 40 x 8 x 55 cm. Weight: 40 kg.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Grifols DG Therm IncubatorThe DG Therm is a digital incubator designed for eff (more)icient gel card processing. It can hold up to 24 DG Gel cards and 24 test tubes across two independent incubation zones. The on-screen display shows the remaining incubation time and temperature, and it features a programmable alarm and removable trash bin.

Colorimeter to test % transmittance in a sample.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW