IKA DB 1.3 VWR Microtube Dry Block (1.5 ml)

43 x Illumina HiSeq Reagent Racks - Mixed Sizes These were removed from a university lab where they (more) were surplus to requirements. The units are in good cosmetic condition with minor marks. Included are; 24 x Racks that hold 8 x 6cm diameter tubes19 x Racks that hold 20 x 12ml tubes

Labconco CentriVap Ultra-Low Cold Trap, -85 C Brushed, Stainless Steel and Powder-Coated Steel E (more)xterior Illuminated Temperature Graph with Endpoint Indication (Operating temperature of -40C) HCFC-Free Refrigerant System 1/3 hp Compressor (Reaches -84C in less than 40 min.) 4-liter, Stainless Steel Collector Acrylic or Stainless Steel Lid (with 2 Quick-Disconnect fittings for connection to a CentriVap Concentrator) Stainless Steel Drain Port (with corrosion-resistant, nylon valve) INCLUDED: The Labconco 7460020 CentriVap Ultra-Low Cold Trap, -85 C, 115V, 60Hz includes: - Tubing - Clamps x 2 - Wire Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo FT902 Immersion Cooler, 115V/60Hz (NRTL Certified) Working Temperature Range -90°C to 30°C R (more)efrigerant R404A/R23 Fluid Type Water, Silicone, Fluorinert/Galden Features - Rapid cooling of liquids down to low temperatures - Counter-cooling of liquids in combination with heating circulators - Environmentally friendly by saving precious tap water - User-friendly operation and handling - Compact design, small footprint - Dry ice substitution - Integrated temperature control and display - With external Pt100 sensor (200 x 6 mm dia., stainless steel) JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FT902 Immersion Cooler, 115V/60Hz (NRTL Certified) includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo CORIO CP-BC4 Heating Circulator, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C (more) - 200°C Heating Capacity 1000W Fluid Type Water, Silicone Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over between internal and external circulation - USB & RS232 connection - High-quality bath tanks made of stainless steel with bath lid and drain tap - Integrated cooling coil for counter-cooling CORIO™ CP heating circulators are suitable for temperature applications to 200 °C with circulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CP circulator incorporates easy change-over for control of fluid circulation internally or externally.Pump inlet/outlet fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. Systems include insulated stainless-steel tanks with integrated cooling coil and drain ports. Bright LED display with easy to use interface including USB and RS232 connections for external PC control and data-logging. PID temperature control provides ±0.02 °C stability. Adjustable centrifugal pump capacity of 8-27 L/min with pressure from 1.5-10.2 psiClass III (FL) according to DIN 12876-1INCLUDED: The Julabo CORIO CP-BC4 Heating Circulator, 115V/50-60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Bath Lid - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards T-Station 300D Dry Turbo Station CF100, 200-240V Ultimate Pressure 5×10-10 mbar Inlet Connec (more)tion DN 100 CF Leak Tightness <1x106 mbar l/s Features - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer nEXT T-StationThe Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 300Our T-Station 300 builds on the existing popular T-Station 85 platform, by replacing the nEXT85H with the nEXT300 turbomolecular pump providing a solutionfor customers and applications that require a higher pumping speed up to 300 ls-1.INCLUDED: The Edwards T-Station 300D Dry Turbo Station CF100, 200-240V includes: - One Year Manufacturer's Warranty

Ohaus Scout STX222 portable scale, with plate Ø 120mm These balances are ideal for laboratory and in (more)dustrial applications. They feature an easy-to-navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They are also equipped with excellent overload protection and advanced connection options. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3'' (109 mm) touchscreen display with VGA color graphics resolution and user-controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Structure ABS housing, stainless steel deck, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, safety slot, stabilizing feet, level indicator front illuminated Construction features Stability indicator, stackable design with storage cover included (except 1mg models), mechanical and software protection against overload and underload, battery life indicator, automatic shutdown, automatic tare, calibration mass provided on models with capacity higher than 620 gr. Integrated applications: - Weighing: determines the weight of the objects on the pan in the selected unit of measurement. - Piece Counting: Counts the number of pieces on the pan using a uniform weight. - Percent Weighing: Measures the weight of a sample displayed as a percentage of a preset weight reference. - Weight check: compares the weight of a sample with respect to the target limits. - Dynamic Weighing: Weighs an unstable sample load. The scale takes an average of weights over a period of time. - Totalization: measures the cumulative weight of multiple objects. The cumulative total can exceed the capacity of the balance. - Density determination: determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for objects that cannot be easily placed on the weighing pan. - Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. - Mole Weighing: Measures the weight of a sample and  calculate it into Moles automatically

Sony Solid-State Memory Camcorder Model-PMW-200 This item was removed from a university where it was (more) surplus to requirement. It is in reasonably good cosmetic condition, powers on, and has been tested with an in-house charger. Please note that it does not include a battery or charger. It will require the following to be operational: Sony BC-U1 or BC-U2 Charger/PSU.And a BP-U30/U60/90 battery pack.

Servomex Analyser Series 1400 CO2 Analyser Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The high resolution MPS module operates on the basis of electromagnetic force converter. The device  (more)may be easily integrated into existing system owned by the customer. Compact design and integrated electronics provide various possibilities of MAS module adaptation into technological lines and installation inside laboratory equipment or devices. Measurements can be carried out using either weighing pan or under-pan weighing system, i.e. solution enabling the load to be suspended beneath the module. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The module has been equipped with RS232 and USB type B interfaces. Dedicated freeware, the R Panel, has been designed to enable control of the module via a computer. It provides access to all the keys and functions available directly from the operation panel, e.g. taring, zeroing, setup, etc. Innovative algorithm for automatic search of electromagnetic weighing modules facilitates connection to a computer. R Panel software makes complete functionality of the R series balances available via the PC. R Panel functionality has been implemented in RLab program as one of its numerous functions.

Benchmark Orbi-Shaker CO2 XL Orbital Shaker The Orbi-Shaker CO2 XL is designed for shaking, mixing a (more)nd aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60C and humidity levels up to 100%. To avoid contamination, unintentional release of gas or deviations from protocol, both speed and time are set via the included remote control module. The remote controller allows the user to set and adjust the shaker settings without opening the chamber door(s). The instrument is supplied with a 16" x 16.5” non-slip platform. In addition, convenient MAGic Clamp platforms (available in large or small) are also available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method has been widely recognized as the easiest way to instantly change between flask clamps of different sizes. Click Here to View Product Video INCLUDED: The Benchmark Orbi-Shaker CO2 XL Orbital Shaker includes: - 16 x 16.5 in Platform w/ Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty