Hettich 4626 Set of 2 Entnahmehilfe für MTP Buckets Becher Removal Frame

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

0

System consisting of: Gilson GX-281 sample robot 2 Gilson 6 position valves 2 Gilson 306 pump Gilson (more) 322 pump

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01162Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12272, 12302 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor 2.0" gas inlet pipe

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: stainless steel wire Nominal value: 500 mg Material: stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

Microtip probes are available in tapered and stepped configurations and are designed to process samp (more)les contained in small diameter vessels at extremely high intensity (refer to chart for recommended volumes). Tapered microtips screw into standard 1/2" step horns with tapped ends. The double stepped microtip consists of a coupler and a stepped tip and screws directly into the converter. It has lower amplitude than the tapered tip, but is capable of reaching into small diameter vessels of greater depth and can process solutions down to 0.1 mL. Typical Applications: - Micro-tapered is recommended for processing spores, fungi, yeast, muscle, and connective tissue. - Double Stepped Microtip –is recommended for red and white blood cells, tissue culture cells, HELA cells, and cells which have a low to medium resistance to breakage. Attaches to converter only. For use with Branson SFX250, SFX550, 250 & 450 Sonifiers .Only attach Microtip to Disruptor horn; attach 2-piece. Double-step Microtip to converter only. Tip Diameter 1/8” (3mm) Intensity Ultra High Ampl. Range 116 - 494 Volume 0.25 – 10ml

Manufacturer: Thermo Scientific Model:  Multifuge X3 FR Refrigerated Centrifuge           with TX-75 (more)0 Rotor with Round Buckets(4x Adapter: 2x 14x15ml / 2x 5x50ml Conical Tube) S/N: 41099204 P/N: 75004536 Description: Minimized footprints, maximized ergonomics - Floor models conserve valuable bench space, and have a footprint that is 24% smaller than the footprint of refrigerated benchtop models* - Low working height of 79 cm provides outstanding ergonomics when removing tubes and exchanging rotors - Fully portable with secure lockable castors— ideal for moving around the lab and easy cleaning, helping to prevent contamination Recommended for: cell culture, microplate, bioproduction, food safety, blood separation, bodily fluid processing, pharmaceutical, biotechnology, stem cell, microbiology, molecular biology, proteomics,and genomics applications Key Features: • SmartSpin technology optimizes acceleration and identifies unbalanced loads • Push-button exchange of rotors • ClickSeal bucket sealing system eliminates the need for screw caps or clips Specifications Multifuge X3 FR Floo Standing Refrigerated Centrifuge: Performance Swinging Bucket Rotors Maximum Capacity: 4 x 1000 ml (with TX-750 and BIOLiner rotors) Maximum Speed: 6000 rpm (with BIOShield 1000A rotor) Maximum RCF: 7164 x g (with BIOShield 1000A rotor) Performance Fixed Angle Rotors Maximum Capacity: 6 x 250 mL (with F14-6 x 250LE rotor) Maximum Speed: 15200 rpm (with 48x2 ml rotor) Maximum RCF: 25314 x g (with 48x2 ml rotor) Control system: microprocessor Drive system: direct, brushless induction low profile motor Rotor Locking System: Auto-Lock III Imbalance Detection System: SMARTSpin Programs: 99 (5 with direct access key) Temperature Set Range: -10 °C to +40 °C Maximum Timer Range: 99h, 59min + continuous Other Features: ClickSeal biocontainment system, language selection, motorized lid latch Max. power consumption: 1950 W Mains supply: 230 V Dimensions wit Lid closed (HxWxD): 84 x 56,5 x 67 cm Weight: 142,5 kg Specifications TX-750 Rotor: Part No.: 75003180 Rotor Capacity: 4 x 750 mL Max Speed: 4700 rpm RCF: 4816 x g Angle: 90° inclusive 4x Round Buckets (P/N:75003608) and 2x 14x15ml Conical Tube (P/N:75003639), 2x 5x50ml Conical Tube (P/N:75003638) Items delivered: - Thermo Scientific Multifuge X3 FR Floor Standing Refrigerated Centrifuge - Power Cord - TX-750 Rotor with Roundbuckets and Adapters - Instruction Manual as PDF via E-Mail The centrifuge is in perfect cosmetic as well as technical condition. - 100% functional tested (runs smooth and quiet).