Heidolph RZR 2000 Rührwerk Overhead Stirrer Rührer 60-700 rpm 50W

0

Yamato WH-201P Auto Pure High Purity Di Type 2 & Type 3 Water Purification System, 120V Flow Rat (more)e 0.5 gpm / 1.9 lpm Resistivity Light 200 KΩ Total Capacity Grains As CaCO₃ 1800 Features - Turn-key system for low cost – on demand service - Resistivity light included for visual indication of cartridge replacement - Available in high purity and high capacity configurations - Available in 2-1/2″ and 4/1/2″ diameter configurations - Outlet isolation valve, spanner wrench and associated tubing provided - Economically produces DI water High Purity DI System - 2-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K DI Light). Type 2 and 3 water quality. High purity models: WH201P and WH501P: use low odor mixed bed cartridges for applications requiring better than 10 MΩ water quality. Perfect for general deionization, battery water filling, humidification, hydrogen generator, glassware rinse, glassware washer, sterilizers. INCLUDED: The Yamato WH-201P Auto Pure High Purity Di Type 2 & Type 3 Water Purification System, 120V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Polyscience F25N0A101B FT Series Flow Through Cooler, Continuous Cooling at -25°C, 120V, 60Hz PolySc (more)ience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to -25°C Designed to run at maximum cooling Ideal for use with heated and refrigerated circulating baths INCLUDED: The Polyscience F25N0A101B FT Series Flow Through Cooler, Continuous Cooling at -25°C, 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Chariot inox 2 plateaux - dim. ext. L x l x h (mm) : 850 X 540 X 940 4 roues pivotantes anti-bruit ø (more) 100 mm, dont 2 à frein 4 butoirs d'angle Capacité de charge : 60 kg/chariot et 30 kg/étagère Equipement Neuf, encore emballé

MVE CryoShipper 8.5 ltr Lab This item was removed from a university where it was surplus to requirem (more)ent. It is in good cosmetic condition, we are unable to test it at our facility. Neck Opening in (mm): 8.50 (216.0)Overall Height in (mm): 21.5 (546)Outside Diameter in (mm): 14.50 (369) ShipsLog 3 Temperature Lid fitted.The data log is not included. Last calibrated: 04:01:2021.Last serviced: 04:06:2021.

Memmert UF30plus Forced Circulation Oven 32L, 115V Working Temperature Range Min. 10°C above ambien (more)t up to +300°C Oven Type Forced Air Circulation Chamber Volume 32 L (1.13 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 32 L (1.13 cu. ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF30plus Forced Circulation Oven 32L, 115V is a cutting-edge solution designed to meet the stringent demands of precision heating and drying in laboratories and industrial environments. This robust unit features a minimum setting temperature range from 10°C above ambient up to a maximum of +300°C, ensuring versatile application possibilities. Equipped with TwinDISPLAY, an adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT-color displays, it offers unparalleled ease of monitoring and precise control over experimental conditions. Enhanced with comprehensive safety features, the Memmert UF30plus includes an overtemperature monitor TWW with protection class 3.1, an adjustable temperature limiter TWB with protection class 2, and a mechanical temperature limiter TB to prevent overheating. The oven’s AutoSAFETY functionality further enhances its reliability, with integrated over- and undertemperature monitoring that closely follows set parameters, alerting users to any discrepancies and shutting down the heating to prevent damage. With its 32-liter capacity, easy-to-clean stainless steel interior, and advanced data logging capabilities via AtmoCONTROL software, this oven is an ideal choice for professionals seeking reliability and precision in their heating applications. INCLUDED: TheMemmert UF30plus Forced Circulation Oven 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.