Heidolph Hei-VAP Expert HL/G5 Non Coated Hand Lift w/ G5 Dry Ice Condenser

Bunsen 1603 water bath. Analogical. Capacity 5 L. Ambient temperature range +5 ºC to 200 ºC. Stainle (more)ss steel tank. Safety thermostat for overheating. Useful dimensions: 290*150*140 mm.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Wall cabinet consisting of 4x sliding door and 1x double door cabinets Dimensions (WxDxH): 5560 x 73 (more)0 x 1280 mm

Average crossflow speed (in work mode): 0.45 m/s Average crossflow speed (in standby mode): 0.20 m/s (more) Airflow (work mode): 2150 m³/h ±10% Sound level: < 54 dBA Pre-filter (EN 779): G3 Horizontal HEPA filter: HEPA 18P7 Dimensions (WxDxH): 1900 x 890 x 1350 mm Interior dimensions (WxDxH): 1805 x 580 x 730 mm Height with support frame: 2082 mm Front aperture (WxH): 1800 x 730 mm Weight: 325 kg

Old Interscience FID Trace GC without software

This item has just arrived in our stock. Please enquire for further details.

Nikon Eclipse TE200 w/ 2 x Objectives Ph1 10x, Ph2 40x This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Item includes the following: Nikon Plan 40X/0.65 Ph2 DL ∞ 0.17 WD 0.57 Nikon Plan 10X/0.25 Ph1 DL ∞/ - WD 10.5

BioRad  Mini-PROTEAN ll vertical electrophoresis system. Up to 2 gels. It Includes: tetra blot modul (more)e, 2 cassettes, buffer tank, casting system, lid with power cables and original user manual. Specifications:

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean &ndash; operator does not touch moisture analyzer&rsquo;s housing. Removing any shocks caused by manual closing of the chamber &ndash; the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and &ndash; thanks to databases &ndash; particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7&rdquo; capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M &ndash; the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D &ndash; the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R &ndash; the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g &ndash; the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

IKA HS 260 Control Shaker Type of Movement Reciprocating Speed Range 10 to 300 RPM Shaking Stroke 20 (more) mm Features - Electronic adjustment of speed and timer - Digital display makes it possible to read the speed, timer function and operating modes - Electronic time switching clock: 0 - 9 h 59min or continuous operation (endless) - With integrated endpoint positioning (for automated robot-controlled sampling) - All functions can be controlled and documented with labworldsoft® software - Wide range of attachment combinations makes it possible to use almost all shapes and sizes of vessels - Attachments are not included, please order separately The HS 260 control open air reciprocating shaker is a reliable and efficient solution for laboratory applications that require gentle mixing of samples. It has a compact and flat design, making it easy to fit into any lab space. With a maximum shaking weight of 7.5 kg, it can handle a variety of vessel sizes and shapes. The shaker's integrated end point positioning function is highly useful for automated robot-controlled sampling.