Hamilton R80600 10uL SYR Agilent HP 9301-0810 710 N (22s/51/2)

IKA MultiDrive control BT Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing (more) range 5 - 4000g Features - TC 1 protective housing included for safe operation with dry samples - 5 spare seals included to extend the service life of blending tubes - USB interface for simplified actuation and documentation - Interval operation feature for efficient coarse crushing and thorough blending - Integrated cooling system in the milling cup for indirect heat dissipation - Built-in weighing function, allowing pre-crushing weighing in the same mixing cup - Batch processing capability with cutting, impact, blending, and dispersing operations - Brushless DC motor for reliable performance - Bluetooth interface for wireless communication Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples. BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers. The plastic blending tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the blending tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery. MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. High performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm,and a 1000 Watt output.Interval operation is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display guarantees user-friendly operation. Temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.INCLUDED: The IKA MultiDrive control BT Package includes: - 5 Spare Seals - KA MultiDrive control - MultiDrive TC 1 Protective housing - MultiDrive BT 250.5 Blending tube, autoclavable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Microtips for the SFX Sonifier are available in four sizes to handle volumes up to 150 ml. The micro (more)tips are also designed to process samples in the smallest diameter vessels. This tip is for use with the Branson 150 watt SFX and SLPSonifier only. Processing Volume 10 - 150 ml Tip Diameter 1/4 in (6.4 mm) Approximate Length 4 in

one Universal Voltmeter for AC and DC Manuf: NEUBERGER / Germany Description:  measuring ranges for (more) AC and DC:. ........0 Volt  to  750 Voltaccuracy class is........................................ 2.5 %duty cycle ..................................................... 2 minutescurrent consumptions :.............................100 V = 12 mA.................750 V = 12 mA instrument is in ruggedized stable housing with all protection covers in special rubberclassic model but still very useful and used worldwide instrument is in used, but good condition and 100 % functional tested

one digital tester Manuf: Wandel & Goltermann Model: TKL-12 description: display: high > +0.7 U ... (more).......low < +0,3 Uimpulse limit:                           ca. 0.5 UVimpulse duration:                   > 1usec power supply:                         + 12 - 14 VDCinput                                           1 MegOhm, 25 pFinput cirrent                              15 uA a very versatile instrument to check and display logic states of CMOC or 12 V logic units quickly and effective up to 0.5 MHz Tester in is used  condition and 100 % functional tested - comes with case and manual

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7&rdquo; graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7&rdquo; colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal&rsquo;s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

Labconco 1200ml Complete Fast-Freeze FlaskCompleteFlask consists of 7543000 Flask Bottom, 7544400 Fl (more)ask Top and a supply offilter paper.Fast-FreezeFlasks attach with adapters to valve ports on Labconco Drying Chambers andManifolds. They are available in clear or amber-colored glass. A completeFast-Freeze Flask consists of a rubber top, glass bottom and a supply of filterpaper.Tops, bottomsand filter paper are available separately as replacement components. Adaptersare available in borosilicate glass or stainless steel. Fast-Freeze Flasks andAdapters are compatible with any brand freeze dryer that has 1/2" or3/4" diameter valve ports.Glass flaskswithstand maximum temperature of 490º C. Flask toppers withstand a maximumtemperature of 450º C.INCLUDED: The Labconco 7541000 1200ml Complete Fast-Freeze Flask includes: - Flask Bottom &amp; Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty