Hamilton 202201/01 10ul 701 SN GA25S/51mm/PST 2 Syringe

Series 3 digital force gauges are designed for tension and compression force testing in numerous app (more)lications from 0.5 N to 500 N. The gauges feature a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges’ features and configurable parameters. USB output is provided for data collection purposes. Set point indicators are provided for pass-fail testing. The gauges are overload protected to 200% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. An ergonomic, reversible aluminum housing allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 3 digital force gauges are directly compatible with Mark-10 test stands, grips, and software.

Complete UV-VIS operation from 195 nm to 800 nm. 7 mm Pathlength, 10 µl Volume Double beam optics (R (more)eference and Sample Paths). Eight absorbance ranges via scrolling up and down controls. Sensitivity levels available for over 95% of all applications. Digital read-out of absorbance and wavelength. Analog outputs for absorbance and wavelength available at rear of instrument. Absorbance and wavelength remote control available via rear connector contact closures. Scrolling selection of wavelength.

IN/OUT cable (PUE C41H, PUE HY10, PUE 5.15, PUE 5.19). Lenght 2 m. Cable types: Standard P0256.2: 2  (more)m Customized P0256.5 (extra charge): 5 m Customized P0256.10 (extra charge): 10 m Compatible with: Scales operated via PUE C41H terminal Scales operated via PUE HY10 terminal Scales operated via PUE 5.15 terminal Scales operated via PUE 5.19 terminal PUE C41H terminal PUE HY10 terminal PUE 5.15 terminal PUE 5.19 terminal HRP platform MWSH weighing module MWLH weighing module

Ohaus i-DF33P2500B1R Defender 3000 Floor Scale, 2500 lb., 0.5 lb. Maximum Capacity 2500 lb. (1,250 k (more)g) Readability 0.5 lb. (0.2 kg) Platform Size 3 x 3 ft. (914 x 914 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Standard RS232 and optional USB Device or Ethernet - ABS plastic or 304 stainless steel indicator, 5 mm/0.196 in. fixed top plate, black painted steel treaded platform, IP65 stainless steel junction box with side access, alloy steel load cells, two carbon steel eye bolts, painted steel ramp available - Four load cell mounted feet with self-swiveling ball-in-cup design, painted and stainless steel floor stands (available as accessories) The Ohaus Defender 3000 Floor Scales meet dry weighing needs in industrial and commercial use. Their high-quality construction is designed to minimize flexing under heavy loads for years of dependable performance. The indicator features a bright display that can change color when in check mode. Scale also includes counting and totalization modes. Stainless steel bases include IP68 loadcells for wet areas. Ramps and mounting plates are available. INCLUDED: The Ohaus i-DF33P2500B1R Defender 3000 Floor Scale, 2500 lb., 0.5 lb. includes: - 2 x Eyebolts - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic LUMOS Fluorescence LED High Powered Light Source Objectives Optional Optical System Spectrums (more) ranging from NUV to visible to NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Features apochromatic design - Compared to the lifespan of only 200 hours and the high cost of mercury-arc lamps, the LUMOS FL provides over 20,000 hours of use - No light toxicity like traditional mercury-arc lamps which can damage samples with infrared light heat toxicity - Instant On/Off: Unlike traditional mercury-arc lamps which take up to 20 minutes to reach optimal brightness levels when turned on, the LUMOS FL is ready for use at the flip of a switch - Dose not pose toxic gas danger to users - Avoids stray light interference during observation, helping to avoid errors in user interpretation of images - Individually controls each LED channel and eliminates need for multiple filters therefore reducing filter cube expense - Features a broad spectrum spread which can satisfy multiple user applications Do more with your Motic microscope setup with the cutting-edge Motic LUMOS Fluorescence LED High Powered Light Source. With this high-performance plug and play illuminator device, you will obtain stunning multi-channel images that can be seamlessly overlaid using our intuitive imaging software. Featuring UV, blue and green color LED channels, with ultra-accurate wavelengths and contrast provided by its black background, this accessory yields sharp images without the need for constant bulb changes or an alignment. INCLUDED: The Motic LUMOS Fluorescence LED High Powered Light Source includes: - Control Box - DC Power Supply - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Heidolph Hei-VAP Expert ML/G3 Non Coated Motor Lift w/ G3 Vertical GlasswareFeatures - Rotation spee (more)d range of 10 to 280 RPM - Heating bath temperature range of 20°C to 210°C - Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm - Multilingual menu and text display for error messages - Integrated solvent library to facilitate adjustment of the required vacuum on an external vacuum controller - Smart functions include timer and maximum temperature limitation - Optional display of vapor temperature - Highly resistant PTFE vacuum seals achieve maximum tightness and reduce expensive spare parts - Available in hand lift or motor lift models - USB and Micro SD interfaces featured 5" touch screen display with clear display of all values, featuring basic and advanced views, along with additional smart functions Separate knobs for rotation and heating with locking function to prevent accidental adjustments, along with LED ring lights Safety heating bath with overheat and dry run protection, featuring ergonomic handles for easy removal/disposal of contents The Hei-VAP Series of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. Precise setting of rotation speed and heating bath temperature on the digital touch display or – for quick access during an active process – directly via the knobs on the operating panel. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert ML/G3 Non Coated Motor Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3 Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Amersham Biosciences AKTA FPLC System This was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and has been serviced, but failed the service. It is sold for spares/repairs. Included are; 1x Amersham Biosciences AKTA FPLC System UPC-900 P-920C/N: 18-1118-67System/N: 01098245 1x UPC-900C/N: 18-1128-95S/N: 01099325 1x P-920C/N: 18-1164-68S/N: 01099849

Beckman Coulter Avanti J-HC Centrifuge This item was removed from a university lab where it was surp (more)lus to requirements. The centrifuge is in good cosmetic condition and powers on. However, due to an imbalance issue, no further testing could be conducted. The spindle is bent. Therefore, it is listed as Spares/Repair.

Polyscience P35N5A101B IP-35 Immersion Probe Cooler, 1.75 Rigid Coil Probe, -35 to +40C, 120V, 60Hz3 (more)D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;}PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P35N5A101B IP-35 Immersion Probe Cooler, -35°C to 40°C, 1004W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Matrix Orbital Delta Plus Thermoshaker Shaking Stroke 3 mm Speed Range 0 - 3000 rpm Heating Te (more)mperature Max 100 °C Features - The Matrix Orbital Delta Plus Thermoshaker mixes, heats, and cools reliably with variable inserts, suitable for various lab applications. - Large display with intuitive menu structure for easy operation and quick insert changes with automatic detection. - Efficient mixing with up to 3,000 rpm and rapid heating/cooling rates for reduced waiting time. - Two speed modes for sample-specific temperature control and programmable ramps for automated tasks. - Wide range of inserts available, with intelligent speed adaptation and secure positioning in an aluminum die-cast housing. - Ideal for tempering/mixing samples, cDNA synthesis, ligation reactions, lysis reactions, and structural changes in DNA, RNA, and proteins. The all-rounder Matrix Orbital Delta plus mixes, heats andcools reliably with variable inserts. Whether blood samples, pharmaceutical agents, DNA/RNA samples or ELISA assays -reaction vials and plates with even the smallest volumes are reliably mixed andtempered in all laboratory applications. No cross-contamination and an optimalmixing result. In addition, Matrix Orbital Delta plus comes with numerous user-friendlyfeatures: - Large and clear display with a convenient menu structureallows for an intuitive operation - Firm quick-release fastener for quick and easy changing ofthe inserts/attachments as well as an automatic attachment detection - Quick and effective mixing of liquids with up to 3,000 rpmand 3 mm shaker diameter - Reduced waiting time through fast heating and cooling ratesof up to 6 °C/min (heating) or 2.5 °C/min at set-point temperature above theambient temperature (cooling, 0.5 °C/min at set-point temperature betweenambient temperature and 15 °C below ambient temperature) - Two different speed modes for sample-specific temperaturecontrol - Automatic performance of mixing, heating and cooling tasksthrough programmable ramps - Wide range of inserts for reaction vessels and plates - Intelligent speed adaption to insert, attachment and fillingvolume - Aluminum die cast housing ensures secure positioning,excellent stability and everyday robustness The device is ideally suited for numerous applications in laboratories, suchas: - Tempering / mixing of samples - Synthesis of cDNA - Enzyme-catalysed linking of RNA or DNA (ligation) - Lysis reactions - Structural change of DNA, RNA and proteins (denaturation) Click Here to View Product Video INCLUDED: The IKA Matrix Orbital Delta Plus Thermoshaker includes: - MATRIX Orbital Delta Plus - IKA Pette vario 100-1000 µl - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Matrix Orbital Delta Plus Thermoshaker Specifications Type of movementorbitalShaking stroke3 mmMaximun load0.3 kgMotor rating output88 WPermissible ON time100 %Speed min (adjustable)300 rpmSpeed range0 - 3000 rpmSpeed displayTFTSpeed deviation30 ±rpm Speed control10 RPM Steps Timeryes Timer displayTFTTime setting min.1 sTime setting max.6000 minOperating modetimer, continuous and program operationWorking with microtiter platesyesWorking temperature min.room temp. -15 °CTemperature setting range min.1 °CHeating temperature max.100 °CHeat output100 WHeat controlTFTSet temperature resolution1 ±°CTemperature control accuracy0.5 ±°CTemperature stability0.5 °CTemperature homogenity0.5 ±°CHeating rate6 °C/minTemperature displayyesCooling Rate0.8 °C/minCooling Power72 WNumber of exchangable attachments10Dimensions (W x H x D)216 x 127 x 351 mmWeight10 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input230 WPower input max.230 WFuse2x T4A 250VComparison of ModelsSpecificationsMatrix Delta PlusMatrix Orbital Delta F0.5Matrix Orbital Delta F1.5Matrix Orbital Delta F2.0Matrix Orbital Delta FPMatrix OrbitalMatrix Orbital PlusShaking Stroke3 mm3 mm3 mm3 mm3 mm3 mm3 mmMaximum Load0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kgSpeed Range0 - 3000 rpm300 - 2000 rpm300 - 1500 rpm300 - 1500 rpm300 - 2000 rpm300 - 3000 rpm300 - 3000 rpmSpeed Control10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM StepsTime Setting Min.1 s1 s1 s1 s1 s1 s1 sTime Setting Max.6000 min6000 min6000 min6000 min6000 min6000 min6000 minHeating Temperature Range-10 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C--Heating Rate5.5 °C/min15 °C/min11 °C/min13 °C/min18 °C/min--Dimensions (W x H x D)216x127x351 mm216x149x351 mm216x158x351 mm216x158x351 mm216x147x351 mm200x120x320 mm216x127x351 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(8) { background-color: #fffacd; }Request a Formal Quote