Gilson DISPENSMAN 5mL

VACUUBRAND BVC Basic G Fluid Aspiration System Control Range 100 to 500 mbar Collection Bottle 2L Gl (more)ass Max. Back Pressure (abs.) 1.1 bar Features - Mechanical vacuum regulator and integrated check valve to provide optimum working vacuum and minimize the vapor load on the vacuum network - Stable base and electricity-free operation for convenience - Autoclavable collection bottle designed to reduce aero­sol and foam formation; autoclavable quick-couplings available as accessory - Aspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube - no contamination of handle by aspirated media - Hydrophobic 0.2 µm sterilizable filter - contamination risks for the vacuum pumping system are greatly reduced The BioChem-VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN®) and does not require electric power. The chemical-resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The evaporation of collected liquid is minimized. The inlet tubing integrated in the bottle head reduces aerosol and foam formation and ensures a long service life of the hydrophobic protection filter. The aspiration system is available either as BVC basic with 4l PP bottle or as BVC basic G with 2l coated borosilicate glass bottle. INCLUDED: The VACUUBRAND BVC Basic G Fluid Aspiration System includes: - Hose Nozzle DN 6/10 mm - VacuuHandControl VHC Aspiration Hand Set - 2L Collection Bottle - Protection Filter - Operators Manual - 1 Year Manufacturer's Warranty

Eppendorf F-35-6-30 Fixed Angle Rotor Eppendorf F-35-6-30 Fixed Angle Rotor, new in packaging. Cat.  (more)# 022822228. This rotor accommodates 6 x 15/50ml. The Eppendorf F-35-6-30 Fixed Angle Rotor is for use in the Vacufuge Plus Vacuum Concentrator. INCLUDED: The Eppendorf F-35-6-30 Fixed Angle Rotor includes: - Full 1 Year Parts and Labor Warranty

Old Interscience FID Trace GC without software

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

F2 Mass Standard - slotted weights. Nominal value - 2 g.

Ohaus HB1AL Analog Dry Block Heater, 1 Block Temperature Range (High) 75°C to 150°C Control Analog U (more)niformity Within the Block ± 0.1°C at 37°C Features - Supports one interchangeable modular block with over 30 configurations - Tool-free block setup for easy operation - Enhanced tube-to-block contact for maximum heat retention and efficiency - Robust painted steel housing for durability - Features dual temperature adjustment knobs with dial markings for precise control - Versatile utility across various laboratory applications - Designed for long-lasting performance in demanding settings The Ohaus HB1AL Analog Dry Block Heater offers exceptional temperature stability, making it perfect for various applications that demand consistent heating. This heater accommodates one interchangeable modular block, providing over 30 configuration choices to suit different needs. The modular blocks are designed for effortless setup without requiring tools, ensuring optimal tube-to-block contact for superior heat retention and efficient operation. The HB1AL features a robust painted steel housing and is equipped with dual analog temperature adjustment knobs, making it an economical yet reliable choice for any laboratory setting.Please Note: Blocks are sold separately and are REQUIRED for operation. Please view the Accessories tab. INCLUDED: The Ohaus HB1AL Analog Dry Block Heater, 1 Block includes: - Support Rod Holder with Locking Knob - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA RC 5 basic Recirculating Chiller, basic Working Temp. -30°C to Room Temp. Pump Pressure Max. 0.6 (more)1 bar Flow Rate Max. 31 l/min Features - Speed-controlled refrigeration system with 1400 W cooling capacity (@20°C) - Natural thermofluid R290 - Designed for cooling applications up to -30°C - RT - Extended operating temperature range until 80°C - Excellent temperature stability of about ± 0,1K (@-10°C) - Speed-controlled pump made of PEEK: (0,6 bar; 31l/min) - Digital level indicator This energy-efficient chiller is operated with an eco-friendly refrigerant and reaches a high power density. This results in a comparatively small working space in the lab. The speed-controlled PEEK pump allows an indirect, continuous adjustment of the maximum pressure and flow rate. Due to its excellent temperature stability of about ± 0,1 K, the RC 5 can handle even sophisticated applications. The isolated, high-quality 7l bath has an integrated hopper and drain valve, ensuring a safe and clean handling of the thermofluid. A hose can be connected to empty the bath in order to avoid direct contact with the thermofluid. The easy-to-open front flap allows an easy cleaning of the cooling unit’s air filter.INCLUDED: The IKA RC 5 basic Recirculating Chiller, basic includes: - Hose olive NW 8 (2 pcs.) - Hose olive NW 12 (2 pcs.) - USB Cable - USB A to Micro-B, 2 m - Power Cord - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson MINIPULS 3 Peristaltic Pump (Drive Unit Only), 110V/220VFeatures - Utilizes positive displace (more)ment pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds the MINIPULS 3 is exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateMINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible. (Please Note: A Pump Head is NOT INCLUDED and is required for operation, please inquire.) INCLUDED: The MINIPULS 3 Pump (Drive Unit) with One Channel, Standard Flow Head (R1) includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf 4 x 50ml Adapters, Cat. # 022638351 New in box Eppendorf 4 x 50ml Adapters, Cat. # 0226383 (more)51 for the A-4-62 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 4 x 50ml Adapters, Cat. # 022638351 are used with the Eppendorf 5810/R Centrifuges. INCLUDED: The Eppendorf 4 x 50ml Adapters, Cat. # 022638351 includes: - Full 6 Month Parts and Labor Warranty