Gilson DISPENSMAN 2.5mL

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface Performance graph of the pressure pump on the six levels. TECHNICAL VISUALIZATION 1 Light sensor for automatic control of display brightness 2 Monochrome LCD display 3 Control panel (refer to following page) 4 Mains switch 5 Selector switch for dividing up the external and internal pump flow 6 Pump output for internal bath circulation 7 Pump output for bath circulation or connection to the pump connection set 8 Pt100 temperature sensor 9 Heater Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead

CABINET CS 120 - CHEMISAFE - Made entirely of electro-galvanized steel sheet (Skin passat) FE P01, t (more)hickness 10/10 mm, cold pressed and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C - “Monolithic” type constructions with feet at the base for leveling the cabinets - Double-paneled and reversible doors made of the same materials, complete with handles with safety locks and locks - CE marked electric fan with self-extinguishing, antistatic technopolymer case resistant to corrosive agents - Protection fuses: 5x20 mm, fast flow 1A - Aspirator flow rate: max 275 m3/h - Activated charcoal filter (optional) mounted on top, suitable for acid substances, with prefilter. Easy replacement of the filter behind a hinged panel with key lock - Handles with lock and key - Tray-shaped steel shelves with a thickness of 10/10 mm for the eventual containment of liquids in case of breakage or spread from the containers. Height adjustable - 110° opening that allows the shelves to be extracted without having to tilt them - Multilingual safety signs indicate the presence of dangerous and toxic products to highlight the contents and storage limits - Standardized pictograms according to ISO 3864 standards - Closure with safety lock and key - Compliant with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3 plasticized shelves (max load 80 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

Ohaus i-DF33P2500B1R Defender 3000 Floor Scale, 2500 lb., 0.5 lb. Maximum Capacity 2500 lb. (1,250 k (more)g) Readability 0.5 lb. (0.2 kg) Platform Size 3 x 3 ft. (914 x 914 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Standard RS232 and optional USB Device or Ethernet - ABS plastic or 304 stainless steel indicator, 5 mm/0.196 in. fixed top plate, black painted steel treaded platform, IP65 stainless steel junction box with side access, alloy steel load cells, two carbon steel eye bolts, painted steel ramp available - Four load cell mounted feet with self-swiveling ball-in-cup design, painted and stainless steel floor stands (available as accessories) The Ohaus Defender 3000 Floor Scales meet dry weighing needs in industrial and commercial use. Their high-quality construction is designed to minimize flexing under heavy loads for years of dependable performance. The indicator features a bright display that can change color when in check mode. Scale also includes counting and totalization modes. Stainless steel bases include IP68 loadcells for wet areas. Ramps and mounting plates are available. INCLUDED: The Ohaus i-DF33P2500B1R Defender 3000 Floor Scale, 2500 lb., 0.5 lb. includes: - 2 x Eyebolts - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Dimensions (HxWxD): 780 x 900 x 600 mm

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In video, the animation shows the ST2 refrigerated incubator with the possible shelves available: shelf with compartments; perforated shelf; grill shelf. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Edwards EMF20 Oil Mist Filter NW25 The Edwards EMF20 Oil Mist Filter NW25 is designed for use with t (more)he Edwards RV12 and E2M18 vacuum pumps. The Edwards EMF20 Oil Mist Filter NW25 extremely efficient at 99.999% DOP test and azide proof. The bottom white half of the body is semi-transparent allowing easy monitoring of oil levels. INCLUDED: The Edwards EMF20 Oil Mist Filter NW25 includes: - NW25 Clamp - Centering Ring - O-Ring - NW25 to 3/4 inch BSP Adaptor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Stain at least 108 slides per day with this fast, space-saving unit that provides flexible options t (more)o meet the workflow needs of any laboratory. Benefits: One to 36 slide capacity, each individually programmable User-specified protocols and choice of reagents Multiple staining runs per day Truly hands-free, walk-away operation with advanced timer functions for overnight use System Features: Incorporates 2D Data Matrix Bar Coding for Slides and Reagents Scans rapidly using high precision label detector technology Has integrated digital bar code scanner Fully configured 2D data matrix software and printer interface Bar code control of all protocol, reagent and slide operations Preprintable data matrix labels with user-defined autoprograms Adaptable for proprietary 2D-labeled reagents or user-defined reagents/labels Carryover: <10-6 Slide Capacity: 1 – 36 slides/run Reagent Capacity: Up to 40 reagents/run, 12mL/reagent Dimensions (LxHxW): 670 x 580 x 760 mm Weight: 54 kg As-is, excluding software!

The Precision Hydrogen Standard generators are designed to provide the gas needed for GC detectors r (more)equiring hydrogen fuel gas, such as FID whilst the Precision Hydrogen Trace generators are capable of supplying GC carrier gas as well as detector gases for multiple GCs. One generator is capable of supplying multiple detectors, and there are various flow rates available to suit individual laboratory needs. Gas Type: Hydrogen Max Gas Flow: 100 cc/min Hydrocarbon Content: Hydrocarbon free Max Output Pressure: 100psi/6.9bar Max Purity: 99.9995% Gas Outlets Fitting: 1 x 1/8” Swagelok compression fitting Water Purity Requirements: ASTM Type II (<1.0 uS / > 1MΩ) Water Consumption: Up to 0.12 L/Day Start Up Time: 180 m Dimensions (HxWxD): 406 x 380 x 540 mm Generator weight: 31kg

Scanner type: Flatbed, Color Photoelectric Device: Color CCD Line Sensor Effective pixels: 27,200 x  (more)37,440 pixels at 3200 dpi Document size: 216 x 297 mm (8.5 x 11.7 in.) A4 or US letter (You can set the scanning area with your software.) Scan resolution: 3200 dpi (normal scanning), 6400 dpi with micro step (interpolated scanning) Output resolution: 25 dpi to 12800 dpi, (50 to 6400 dpi in 1 dpi steps, 12800 dpi. 12800 dpi with zoom) Scan speed: 14.3 msec/line at 3200 dpi, 3.5 msec/line at 600 dpi Color Separation:RGB Color Filters on CCD Image data: 16 bits per pixel per internal color, 16 bits per pixel per external color Brightness: 7 levels (In EPSON Scan, Brightness is controlled with gamma correction) Line Art: Fixed Threshold, Text Enhancement Technology (selectable on and off) Halftoning: AAS (Auto Area Segmentation), Selectable on and off, 3 halftone modes (A, B and C) and 4 dither patterns (A, B, C and D) for bi-level and quad-level data Gamma Correction: 2 types for CRT screen, 3 types for printer, 1 user-defined setting Color correction: 1 type for CRT display, 3 types for output to printer, 1 type for user-defined setting (only user-defined color correction is available in EPSON Scan) Interface: USB 2.0 (Type B connector) and IEEE 1394 Serial Bus Interface Light source: White fluorescent lamp with cold cathode Flawless operation: 30,000 carriage cycles (failure-free interval) Dimensions (WxDxH): 304 x 476 x 122 mm Weight: 6.0kg