FC5306 Ohaus

This listing is for a Hettich EBA 20 CentrifugeEBA 20 and EBA 20 S are compact and practical centrif (more)uges for small sample volumes. They are fitted as standard with an angle rotor for 8 tubes up to a volume of 15 ml. The EBA 20 attains a max. RCF of 3,461 and is the ideal choice for a medical practice.

This listing is for a Star Lab C1000-STR-230EU Plate Centrifuge. The unit is in full working condit (more)ion and is ready for immidate realese. The plate centrifuge makes the safe and quick spin down of droplets and condensation very easy. Sealed plates are loaded vertically and surface tension keeps samples in place so there is no danger of spilling samples. The centrifuge accepts all plates up to 25 mm high. An optional adaptor is available for centrifuging 48-well PCR plates and 0.2 ml PCR tubes or strips. Less than quarter the size of most plate centrifuges Accommodates two plates Rapid start to stop Use before and after thermal cycling to increase PCR yield Accepts skirted, semi-skirted and non-skirted plates Easy cleaning and maintenance Rotor capacity: Two plates, any style, up to 25 mm high Power supply: 230 V, 50/60 Hz Permissible Relative Humidity: < 85% Dimensions (W × D × H) 190 mm × 210 mm × 193 mm

Maximum RCF with fixed angle rotor: 20913 x g Maximum RCF with swing-bucket rotor: 4500 x g Maximum  (more)RCF with plate rotor: 3486 x g Speed range: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Maximum capacity: 4x 750 mL/4x MTP Acceleration/braking ramps: 10/10 Timer: 1 min to 99 min, continuous, short-spin Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf FA-45-6-30 fixed angle rotor (max 12100 rpm, 6x 50 mL falcon tube capacity) 1x Eppendorf FA-45-6-30 aerosol-tight lid

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and runs well to 6000rpm. It also cools and incubates as it should. It is in good cosmetic condition with minor marks. It is supplied with;MSE Rotor 43124-141SN - 7962Max RPM - 6000 4 x Buckets4 x Beige Adaptors hold 1 x 50ml tube each

GE Healthcare / Cytiva S-2000 - Centrifuge/Therm. Module Lab This item was removed from a university (more) where it was surplus to requirement. It is in excellent condition, we are unable to test it further due to the nature of the item. Item No/Product Name: 8800.O/Part No: 851 1332.Serial No: 239529.

Beckman Coulter Optima L-100 XP Ultra Centrifuge This item was removed from a university laboratory  (more)where it was surplus to requirements. It is in good cosmetic condition with minimal signs of general use.The unit reached its maximum rotor speed of 32,000 rpm quickly and consistently, and temperature testing confirmed it reached both 0ºC and 37ºC without issues. The lab confirmed it was in good working order prior to removal Specifications:- Model: Optima L-100 XP - Rotor Max Speed: 32,000 rpm - Temperature Range Tested: 0ºC to 37ºC In good working condition with efficient rotor and temperature functionality.

SCALES SUITABLE FOR EVERY USE The Navigator Series is perfect for general weighing applications in l (more)aboratory, industrial, education, retail, commercial, manufacturing, food and portioning environments. A powerful, rugged and multifunctional scale capable of handling a wide range of weighing applications with features such as fast stabilization time, overload protection four times its rated capacity and easy operation. - Excellent value for money - One-second stabilization to improve efficiency, productivity and throughput - Overload protection system, capable of withstanding loads up to four times higher than the nominal capacity: protect the scale from improper use. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Checkweighing: Compares the weight of a sample against the set targets. Other standard features and equipment ABS construction, stainless steel weighing pan, transport lock, menu switch and safety lock for adjustment, non-slip and adjustable feet, bubble level, mechanical and software overload/underload protection, indicator stability, low battery indicator, auto power off, user selectable print options, user selectable communication settings. MODELLI DISPONIBILI Applications Weighing, Parts Counting, Percent Weighing, Checkweighing Display Liquid Crystal Display (LCD) with backlight Operation AC adapter (included) or 4 C batteries (not included) Communication RS232, USB, or Ethernet (available as accessories) Construction ABS housing, stainless steel pan, transportation lock, slip-resistant and adjustable feet, leveling bubble Design Features Menu and calibration lock switch, mechanical and software overload/underload protection, stability indicator, low battery indicator, auto shut-off, user-selectable print options, user-selectable communication settings SUITABLE FOR ANY FIELD AND USE EDUCATIONAL: valuable overload protection system. Additionally, the portability of the Navigator balance makes it ideal for field experiments. LABORATORY: simple to clean, precise and easy to use in the laboratory. Ideal for laboratory applications such as formulation, quality inspection, testing and experimentation. INDUSTRY: Robustness, speed and accuracy, it is ideal to use in medium-light industrial applications such as paint and ink mixing, packaging, sampling and piece counting. SALES, TRADE, AND MANUFACTURING: Rugged, Portable, and Reliable. Ideal for use in shipping and receiving, retail or warehouse environments. Battery operation and counting and checkweighing modes expand the possibilities of use in hobby, inventory management, inspection and quality control. FOOD AND PORTIONING: hygiene, duration and reduced maintenance. Ideal for portioning and in pre-packaging. Units of measure such as kg, g, lb, oz, lb:oz and checkweighing and percentage checkweighing modes enhance their utility at the counter, in prep and in the kitchen.

This Gast 5H Series Air Compressor Model - 5HCE-790D-M501X-1 was removed from a university lab where (more) it was surplus to requirements. The unit powers up and builds pressure but has not been tested further. It works well. It is in good cosmetic condition with minor marks.

VACUUBRAND Diaphragm and Valve Service Kit for MD 4C NT/VARIO, PC 3003, and PC 3004 Set of diaphragm (more)s and valves for MD 4C NT/VARIO, PC 3003 and PC 3004. INCLUDED: The VACUUBRAND Diaphragm and Valve Service Kit for MD 4C NT/VARIO, PC 3003, and PC 3004 includes: - VACUUBRAND Diaphragm and Valve Service Kit for MD 4C NT/VARIO, PC 3003, and PC 3004 - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert UF110 Forced Circulation Oven 108L, 115V Working Temperature Range Min. 10°C above ambient  (more)up to +300°C Oven Type Forced Air Circulation Chamber Volume 108 L (3.8 cu.ft.) Features - Setting temperature range from +20 to +300°C - Working temperature range of at least 10°C above ambient up to +300°C - Volume of 108 L (3.8 cu.ft.) with maximum loading capacity of 385 lbs - ControlCOCKPIT with adaptive multifunctional digital PID-microprocessor and high-definition TFT-color display - Forced air circulation by quiet air turbine, adjustable in 10% steps - AtmoCONTROL software for programming, managing, and transferring data via USB or Ethernet - Fully insulated stainless steel doors with 2-point locking and inner glass doors - Easy-to-clean interior made of stainless steel with integrated large-area heating on four sides The Memmert UF110 Forced Circulation Oven 108L, 115V offers precise and reliable temperature control for various industrial and laboratory applications. With a working temperature range of at least 10°C above ambient up to +300°C, this oven is designed to handle demanding thermal processes. It features a spacious 108 L (3.8 cu.ft.) chamber that can accommodate a maximum load of 385 lbs, making it ideal for high-capacity heating tasks. The ControlCOCKPIT’s adaptive multifunctional digital PID-microprocessor controller, equipped with a high-definition TFT-color display, provides effortless monitoring and management of critical parameters like temperature, fan speed, air flap position, and program settings. The integrated SetpointWAIT function ensures that the process time only begins once the desired temperature is reached, enhancing precision in every operation. Built for durability and efficiency, this model utilizes a quiet air turbine for forced air circulation, adjustable in 10% increments to suit specific needs. The oven’s interior is constructed from easy-to-clean stainless steel, reinforced with deep-drawn ribbing and large-area heating on all four sides, ensuring uniform temperature distribution. The fully insulated stainless steel door with a 2-point compression lock and inner glass door provides safe and secure operation. Additionally, the oven includes AtmoCONTROL software for programming, managing, and transferring data via USB or Ethernet, allowing users to effectively monitor and document every process. This robust design, combined with versatile control technology, makes the Memmert UF110 an ideal choice for laboratories and industrial facilities seeking consistent and precise temperature management. INCLUDED: TheMemmert UF110 Forced Circulation Oven 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA R 1333 Anchor Stirrer Tangential flow, high shearing rate at edges, minimum deposits on the ves (more)sel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids. Stirrer Ø: 150 mmShaft Ø: 10 mmShaft length: 550 mm INCLUDED: The IKA R 1333 Anchor Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

Benchmark Orbi-Shaker CO2 w/ Remote Controller The Orbi-Shaker CO2 series is designed for shaking, m (more)ixing and aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60C and humidity levels up to 100%. To avoid contamination, unintentional release of gas or deviations from protocol, all settings are adjusted via the included remote control module. This module can be stored outside of the chamber and connects to the shaker via a flat (1mm thickness) cable, that easily passes through a port or underneath an incubator door without compromising the seal. This allows for user adjustment of run time or mixing speed without opening the chamber door(s). The instrument is supplied with a non-slip rubber mat platform. In addition, convenient MAGic Clamp platforms (of multiple sizes) are also available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method has been widely recognized as the easiest way to instantly change between flask clamps of different sizes.Click Here to View Product Video INCLUDED: The Benchmark Orbi-Shaker CO2 w/ Remote Controller includes: - 13 x 13 in Platform w/ Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty