Edwards T-Station 85H Wet Turbo Station ISO63, 100-120V

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Packard Biochip Technologies ScanArray Lite Micro Array This was removed from a university lab where (more) it was surplus to requirements. The unit powers up but has not been tested further. The lab confirmed it was working prior to removal. It is in great cosmetic condition with only minor marks. The power lead is included.

Yamato WE-200 Pure Line Type 1 Water Purification System, 100-240V Pure Water Delivery Rate ~0.5 to (more) 1L/min Final Filtration 0.1μm Membrane Filter Water Quality Display Conductivity/Resistivity/Temperature Features - Suitable for high sensitivity trace analysis - Lower running cost - By adopting reverse osmosis (RO) membrane cartridge set, life span of consumables has been expanded significantly - Benchtop type, space saving - Easy water sampling by attaching to water faucet - Easy to operate digital display - Displays replacement of consumables and its exchange history - Standard equipped with membrane filter to protect pure water production from contamination - Electromagnetic valve equipped at sampling water port for leakage prevention - Universal power supply: works with 100-240VAC The Yamato WE-200 Pure Line is a benchtop water purification system which features an integrated reverse osmosis membrane cartridge to increase the life span of all consumables significantly. The standard equipped membrane filters additionally protect pure water production from contamination. It displays alerts for consumable replacements and keeps track of replacement history. The WE-200 produces ASTM type 1 deionized water and is suitable for high sensitivity analysis. INCLUDED: The Yamato WE-200 Pure Line Type 1 Water Purification System, 100-240V includes: - Supply & Drain Water Hoses - Pre-Treatment Cartridge - Reverse Osmosis (RO) Membrane Cartridge Set - Membrane Filter - Seal Tape - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Pette multi 12 x 20 - 200 µlLies comfortably in your hand with uncompromising precise performanc (more)e: IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 12 x 20 - 200 µl includes: - Two Year Manufacturer's Warranty

Laboratory heating magnetic stirrer LBX 3L / 280°C - NEW New Equipment Speed - Rpm: 200-1500 Top pla (more)te diameter 135mm Hot plate with ceramic cover LED display that shows speed and temperature 515W Max temperature: 580°C Stirring volume: 3 liters ABS chassis with flame retardant material, resistant to weak acids and alkalis External dimensions (L x W x H): 260 x 150 x 80 mm 200-240V 50-60Hz

Amersham ECL Gel Box is a mini-gel system for high quality separation of proteins. Amersham ECL Gel  (more)is compatible with Tris-Glycine buffer and contain no SDS, makingit ideal for protein analysis under both native and denaturing conditions. Amersham ECL Gel is compatible with standard protein detection protocols.

Thermo Scientific Megafuge 16 ventilated centrifuge. Maximum speed 15,200 rpm (25,830 x g). Includes (more) TX-400 rotor, whose maximum speed is 5000 rpm, four buckets and adapters for 14 10 ml tubes. (Adapter ref. 75003681). Nine acceleration ramps and 10 deceleration. Digital screen. Memory for 6 programs. Maintenance free induction motor. Timer 9 h 99 min. and continued. Safety and imbalance controls. Dimensions: 60.5*44*36cm; weight 57 kg. Other adapters not included. Ref: Thermo Scientific Set of 2 15 mL adapters (Cat. No. 75003682) and Set of 2 50 mL adapters (Cat. No. 75003683). The Thermo Megafuge 16 is an easy-to-use benchtop centrifuge with intuitive controls, a digital setup display, and a memory bank of six programs to store your processes. It has a maximum capacity of 1.6 liters, reaches a maximum of 15,200 rpm and a timer of up to 9h59min. It is recommended, among other applications, for cell culture, blood processing, microplates, etc.

IKA RH Basic White Magnetic Hotplate Stirrer Stirring Quantity Max. (H2O) 15 L Speed Range 100 - (more) 2000 rpm Heating Temperature Range 50 - 320 °C Features - Economic magnetic stirrer with integrated heating up to 600 watts, ideal for rapid heating of solutions. - Adjustable safety temperature range from 50 to 320 °C ensures precise temperature control and safety. - Soft-start feature for gentle motor activation and prolonged stir bar life. - Strong magnetic field and wide speed range (100 - 2000 rpm) suitable for volumes up to 15 liters. - Includes three IKAFLON® magnetic stirring bars (20 mm, 30 mm, and 40 mm) and H 102 cover and protection handle. Newly designed, economic magnetic stirrer with heating. Bushing according to DIN 12878 for connecting an electronic contact thermometer, such as the ETS-D5. Highly accurate temperature control is possible with sensor placed directly in the medium. High heat output of 600 watts and stainless steel compound hot plate ensures rapid heating. Adjustable safety temperature from 50 to 320 °C. INCLUDED: The IKA RH Basic White Magnetic Hotplate Stirrer includes: - RH basic white - IKAFLON® 20 Magnetic stirring bar - IKAFLON® 30 Magnetic stirring bar - IKAFLON® 40 Magnetic stirring bar - H 102 Cover for RH basic - H 102.1 Protection handle - Screwdriver (use for safety circuit) - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 1 Year Warranty Extension with IKA Registration) IKA RH Basic White Magnetic Hotplate Stirrer Specifications Number of stirring positions1Stirring quantity max. per stirring position (H2O)15 lMotor rating output2 WDirection of rotationleftSpeed display set-valuescaleSpeed controlTurning knobSpeed range100 - 2000 rpmStirring bar length20 - 80 mmSelf-heating of the set-up plate by max. stirring (RT:22°C/duration:1h)28 +KHeat output600 WTemperature display set-value scaleTemperature unit °CHeating temperature range 50 - 320 °CHeat controlscaleTemperature setting range0 - 320 °CConnection for ext. temperature sensorETS-D5Characteristics in the medium with temperature sensor1l M50 Oil at H1500Heating rate medium6 K/minAdjustable safety circuit100 - 360 °CSet-up plate materialtechnical enamelSet-up plate dimensionsØ 135 mmDimensions (W x H x D)160 x 100 x 250 mmWeight3.135 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage230 / 115 / 100 VFrequency50/60 HzPower input620 W