Edwards T-Station 300D Dry Turbo Station CF100, 100-120V

Chloride Portable Photometer HANNA HI96753 New equipment in its original packaging Chloride Range :  (more)0.0 a 20.0 mg/L (ppm) Chloride Resolution : 0.1 mg/L (ppm) Chloride Accuracy : ±0.5 mg/L ±6% de la lectura Chloride Method : Adaptación del método de tiocianato de mercurio (II) Total Chlorine Range : 0.000 to 0.500 mg/L Total Chlorine Resolution : 0.001 mg/L (ppm) Total Chlorine Accuracy : ±0.020 mg/L ±3% of reading Chlorine Method : adaptation of the USEPA method 330.5 Photometer/Colorimeter Light Source : tungsten lamp Photometer/Colorimeter Light Detector : silicon photocell with narrow band interference filter @ 525 nm Battery Type/Life : 9V battery Automatic Shut-Off : after ten minutes of non-use in measurement mode; after one hour of non-use in calibration mode; with last reading reminder Environment : 0 to 50°C (32 to 122°F); RH max 95% non-condensing Weight : 360g (12.7oz.) Dimensions : 193 x 104 x 69 mm (7.6 x 4.1 x 2.7”)

Ohaus 30400194 Modular Combination Heat Block, 0.5 mL, 1.5 mL, 2 mL Tubes The Ohaus 30400194 Modular (more) Combination Heat Block, 0.5 mL, 1.5 mL, 2 mL Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400194 Modular Combination Heat Block, 0.5 mL, 1.5 mL, 2 mL Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco CentriVap Acid SystemVacuum Concentrator: Acid-Resistant benchtop type with glass lid B (more)rushed stainless steel and glacier white, powder-coated steel exterior with blue accents 300w heater with heat from OFF to HI (100C) in one degree increments and heat time from 1 to 999 minutes PTFE-coated chamber with Hastelloy shaft Cold Trap: HCFC/CFC-free refrigeration system with 1/3 hp compressor lowers cold trap to -50C Temperature graph that illuminates green when the collector coil reaches operating temperature INCLUDED: The Labconco 7983013 CentriVap Acid System, 115V, 60Hz includes: - Acid-Resistant Benchtop Vacuum Concentrator - Cold Trap -50°C - Clear Canister 7460900 - Acid Insert 7814800 - 12-13 mm Acid-Resistant Rotor 7455101 - Glass Trap 7397605 - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The impulse bar sealer hpl 450 A seals any type of thermoplastic (as well as compostable and biodegr (more)adable materials such as ORGANIXprotect) plastic film and aluminium laminate film. The sealing and cooling time can be set separately and the film length can easily be adapted to the item being packaged. Thanks to the impulse process, the device is very cost-effective since it only draws power when it is being used. A standard 3 mm  wide sealing seam, consistent contact pressure thanks to an integrated interlock magnet and constant temperature distribution over both sealing bars ensure a fast and reliable sealing process. The simple operation is effected via a footswitch.

Syringe Size: From 10 µl to 50/60 ml Flow Rate Range (Min/Max): 0.0014 µl/hr with 0.5 µl syringe to  (more)26.55 ml/min with 50/60 ml syringe Maximum Force: 8 kg Maximum Pressure: 8 p.s.i. with 50/60 cc syringe; 100 p.s.i. with 1 ml syringe Step Rate (Min/Max): 1 pulse in 27.6 sec / 200 steps/sec Pusher Advance/Step: 0.8 µm pusher advance per motor step Pusher Travel Rate (Min/Max): 0.7 µm/min to 15 mm/min Dimensions (HxWxD): 114 x 229 x 114 mm Weight: 2.1 kg

WRT Laborbau Fumehood 1800