Eaton UPS

HRC 2 basic Working Temp. -20°C to 100°C Pump Pressure Max. .5 bar Flow Rate Max. 21 l/min Features  (more)- Speed-controlled refrigeration system with 400 W cooling capacity - Speed-controlled pump make of PEEK: (0.5 bar; 22 l/min) - 1500 W heating capacity (1200 W @115V) - Digital level indicator - Safety classification III (FL) according to DIN 12876 - Adjustable temperature safety circuit The compact refrigerated and heating circulator HRC 2 basic is renowned for its high energy efficiency, a working temperature powerful infinitely range from -20°C to 100°C and a variable pressure and suction pump. The on-demand and speed-controlled compressor reduces noise and operating costs. The high-quality Isolation of the 4 l bath allows fast heating and reduces heat input when cooling. Using the external temperature control circuit is possible for up to 2.5 l thermofluid without a refill.The integrated hopper and drain valve ensure a safe and clean handling of the thermofluid. The easy-to-open front flap allows an easy cleaning of the cooling unit’s air filter. There is a drain valve on the front side of the bath. A hose can be connected to empty the bath, so the user does not get in direct contact with the thermofluid.INCLUDED: The IKA HRC 2 basic Cooling and Heating Circulator, 2-5 l, basic includes: - Power Cord - Two Year Manufacturer's Warranty

Eppendorf 8 x 7-18ml Adapters, Cat. # 022638327 The Eppendorf 8 x 7-18ml Adapters, Cat. # 022638327  (more)are for use with the Eppendorf A-4-62 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 8 x 7-18ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 20mm x 126mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 8 x 7-18ml Adapters, Cat. # 022638327 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 8 x 7-18ml Adapters, Cat. # 022638327 SpecificationsBottom ShapeFlat with Rubber MatRotor CompatibilityEppendorf A-4-62 Swing Bucket Rotor

Edwards T-Station 85H Wet Turbo Station - NW40 200-240V Ultimate Pressure <5 x 10-8 mbar Inlet Co (more)nnection NW40 Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application nEXT T-StationThe Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85Our T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Dry Turbo Station - NW40 200-240V includes: - Power Cord - One Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Edwards E2M28 Rotary Vane Vacuum Pump, 230V, Cat. #: A37316903 Ultimate Vacuum 1 x 10-3 mbar / 7.5 (more) x 10-4 Torr Inlet Connection NW25 Flange Displacement 38.9 m3h-1 / 22.3 ft 3min-1 Features - Displacement of 32.2 m3/h at 50 Hz and 38.9 m3/h at 60 Hz - Maximum pumping speed of 27.5 m3/h at 50 Hz and 33.0 m3/h at 60 Hz - Ultimate vacuum of 1 x 10-4 mbar partial pressure and 1 x 10-3 mbar total pressure - Thermal overload protection with automatic motor reset - Mass spectrometer compatibility for applications like gas analysis and leak detection - Oil-sealed two-stage rotary vane pump with sight-glass and drain-plug for easy maintenance - Maximum water vapor inlet pressure of 30 mbar - Rotational speed of 1440 rpm at 50 Hz and 1720 rpm at 60 Hz The Edwards E2M28 Rotary Vane Vacuum Pump, 230V, Cat. #: A37316903 is a high-performance two-stage, direct-drive vacuum pump designed for precise and reliable operation in laboratory and industrial environments. With a displacement of 32.2 m³/h at 50 Hz and 38.9 m³/h at 60 Hz, it delivers a maximum pumping speed of 27.5 m³/h and 33.0 m³/h, respectively. Its ultimate vacuum capabilities include 1 x 10⁻⁴ mbar partial pressure and 1 x 10⁻³ mbar total pressure, ensuring optimal performance for demanding applications. The pump features an oil-sealed design with an integrated sight-glass and drain-plug for easy maintenance, along with thermal overload protection that automatically resets the motor after cooling. Built for versatility, the Edwards E2M28 supports a maximum water vapor inlet pressure of 30 mbar and operates at rotational speeds of 1440 rpm at 50 Hz and 1720 rpm at 60 Hz. Its robust construction includes a fully enclosed motor with a cooling fan to maintain efficient operation. Designed for compatibility with a range of systems, this vacuum pump is ideal for gas analysis, leak detection, mass spectrometry, electron microscopy, and other critical processes. The E2M28 offers dependable performance with features tailored for long-term use and minimal maintenance.Click Here to View Product Video INCLUDED: The Edwards E2M28 Rotary Vane Vacuum Pump, 230V, Cat. #: A37316903 includes: - Edwards Ultragrade 19 Oil - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Servomex Analyser Series 1400 CO2 Analyser This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Julabo PURA 10 Water Bath, 115V/60Hz Working Temperature Range 18°C - 99°C Heating Capacity 1200W V (more)olume 9.5L Features - Ease of use - Bright display - Splash-proof protected mains switch - Built-in dry running protection - No disturbing elements in the bath - Platform included as standard - Integrated timer - Non-slip rubber feet - Ergonomic recessed grips - Integrated drain screw The PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of ± 0.15°C 2). The working temperature range of +18°C to 99.9°C 1) allows a wide range of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages and in the dental field. All models (except PURA 4) come with an integrated drain screw for quick and clean draining of the baths. PURA water baths can be used flexibly and can be easily transported through ergonomic side recessed grips. Non-slip rubber feet ensure a firm footing and more safety in the laboratory. The units are splash-proof, feature a (membrane) keypad and temperature display (LED) for ease of use. Operation in °F or °C with integrated timer. There are no disturbing parts inside the bath so that the entire inner surface can be used to safely temperature-control even small sample containers. Click Here to View Product Video INCLUDED: The Julabo PURA 10 Water Bath, 115V/60Hz (NRTL Certified) includes: - Platform - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty