DRÄGER CH 214 Abgassonde ... Exhaust Gas Probe

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Cytiva Xuri Cell Expansion System W25 Lab This system was removed from a university lab where it was (more) surplus to requirement. All units are in good cosmetic condition with the Xuri Cell Expansion System W25 base unit powering on. All units have been powered on using test cables required to connect the Cytiva Xuri Cell Expansion W25 Pump and Cytiva Xuri Cell Expansion W25 CBCU. These are test cables and are not included in the listing. This system comprises the following: Cytiva XuriTM Cell Expansion System W25 base unitCytiva Xuri Cell Expansion W25 PumpCytiva Xuri Cell Expansion W25 CBCU HP EliteDesk PC w/ Dell Monitor & HP Mouse and Keyboard . There is no software installed. Cytiva Filter Heater

IN/OUT cable (PUE C41H, PUE HY10, PUE 5.15, PUE 5.19). Cable types: Standard P0256.2: 2 m Customized (more) P0256.5 (extra charge): 5 m Customized P0256.10 (extra charge): 10 m Compatible with: Scales operated via PUE C41H terminal Scales operated via PUE HY10 terminal Scales operated via PUE 5.15 terminal Scales operated via PUE 5.19 terminal PUE C41H terminal PUE HY10 terminal PUE 5.15 terminal PUE 5.19 terminal HRP platform MWSH weighing module MWLH weighing module

Labconco Liquid Nitrogen TrapForprocessing samples with ultra low eutectic points. Secondary Trap co (more)nnects inseries with a freeze dry system and vacuum pump to prevent contaminants frommigrating into the vacuum pump. After pulling a vacuum, liquid nitrogen may beintroduced via the liquid nitrogen port. Liquid nitrogen cools to -196C(-321F) to trap contaminants with low eutectic points. The well may bedefrosted and the liquid drained from the drain hose. Glacier whiteepoxy-coated steel construction. Two valves may be opened (trap) or closed(by-pass). Opened valves allow gaseous contaminants to be trapped in the liquidnitrogen well. Closed valves allow gaseous contaminants to by-pass the wellduring defrosting and draining. 3/4" OD inlet and outlet connections.Includes an insulated filler tube for connection to a user-supplied liquidnitrogen tank; 20" rubber tubing; 3/4" ID x 3/8" wall; and twoclamps. Liquid nitrogen is required (not included). INCLUDED: The Labconco 7394800 Liquid Nitrogen Trap includes: - Insulated Filler Tube - Clamps x 2 - 20" Rubber Tubing (3/4" ID x 3/8" Wall) - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

OAI  Optical Associates Model J500/VIS Mask Aligner This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up but will require a level of refurbishment to get i back into working order. The system powered on but only one of the two optical microscope lights illuminated and displayed an image of the surface of the work platform on the monitor. The optical cables were swapped over to test the other monitor and microscope, these also worked. A new bulb is required in the light box marked "Bulb Blown".The extractor fan works well.The UV Light Controller would not power up properly when connected, making loud clicking noises, this controller did work on another OAI system of the same model which suggests there is a problem in the main mask aligner unit with the UV feature.The microscope moved around smoothly on the mounting slides but could not be moved by the joystick. It is i good cosmetic condition with minor marks.

MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump, 250 mbar Ultimate Vacuum 253 mbar (more) (190 Torr) Pumping Speed 12 L/Min Number of Heads 1 Head Features - Provides clean and uncontaminated air exhaust with a built-in filter - Automatic cooling exhaust system allows for 24-hour continuous use - Customizable vacuum and gas velocity settings for specific applications - TEFLON surface treatment protects against gas corrosion, enhancing durability - Delivers a pumping speed of 12 L/Min for effective operation - Achieves a vacuum level of 253 mbar (190 Torr) for efficient performance The MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump is designed for efficient and reliable operation in environments that require clean and uncontaminated air exhaust. This pump features an oil-free design with a built-in filter, ensuring that the exhausted air remains free from contamination. The MS-VP250 is equipped with an automatic cooling exhaust system, allowing for continuous 24-hour operation, making it ideal for demanding laboratory and industrial settings. Its pressure-adjustable design enables precise control of vacuum and gas velocity to meet specific application requirements. The pump's TEFLON surface treatment provides robust chemical and corrosion resistance, ensuring durability even when exposed to harsh gases. With an ultimate vacuum of 253 mbar (190 Torr) and a pumping speed of 12 L/Min, the MS-VP250 delivers efficient vacuum performance. It features 6 mm inlet and outlet flanges, operating within a temperature range of 7°C to 40°C. The pump runs quietly with a noise level of less than 60 dBa, making it suitable for environments where low noise is essential. Its compact design, measuring 7.7 x 3.8 x 6.1 inches, and a weight of 7.6 kg, make it easy to fit into various setups. The pump is equipped with nitrile butadiene rubber valves for reliable operation and requires a motor power of 75W, compatible with electrical requirements of 110/220V, 50/60Hz. The MS-VP250's distinctive orange color not only enhances its aesthetic appeal but also signifies its robust anticorrosive and chemical resistance properties, making it a reliable choice for a wide range of vacuum applications.INCLUDED: The MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump, 250 mbar includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Samples and applications - Homogenization of food (milkshakes, homogenised food, drinks) - Preparati (more)on of stuffings for food (e.g. meat, vegetables) TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 40 mm - Stator/rotor gap: 8 mm - Volume (H2O): 1000 - 4.000 ml - Immersion depth: 40-175 mm - Max. speed: 20,000 rpm - Max. circumferential speed: 18.8 m/s - Ultimate fineness, emulsions: - - Ultimate fineness, suspensions: - - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

IKA Microstar 15 Control Overhead Stirrer Speed Range 0/30 to 1000 RPM Viscosity Max. 8,000 mPas St (more)irring Quantity Max. 10 l Features - Hardened glass enclosed, fast response display for maximumvisibility and chemical resistance - State-of-art vibration sensors detect deviations frompermissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kineticsensitive reactions and reminders - Viscosities up to 8,000 mPas and volume of up to 10 l - Continuously adjustable speed between 0/30 – 1,000 rpm - USB interface, e.g. for documenting parameters using labworldsoft®or installing firmware updates - Intuitive and simple handling; touch-sensitive surface forlong service life - Temperature reading on display - Chemical resistant housing - Key lock function - Microprocessor-controlled speed governor for constantrotational speed, even with changes in viscosity The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, these high-tech overhead stirrers with compact designs are ideal for special applications. Combining high performance with particular excellence, they require minimal space and come with a lifetime guarantee. These products offer incredible stirring capabilities and control, making them a great cost-effective option for laboratories. With features like hardened glass enclosed displays, state-of-the-art vibration sensors, and microprocessor-controlled speed governors, the MINISTAR series ensures precision and reliability.Capable of handling a wide range of viscosities and volumes, these stirrers provide continuously adjustable speeds, making them versatile and efficient for various applications. See for yourself:

Eppendorf 1 x 1.4ml Adapters, Cat. # 022639285 New in box Eppendorf 1 x 1.4ml Adapters, Cat. # 02263 (more)9285, for A-4-38 rectangular buckets for Eppendorf 5702 centrifuges. These adapters fit 5 tubes per adapter; 20 tubes per rotor. Maximum tube length without a cap is 100mm; with an aerosol tight cap maximum tube length is 100mm. Adapter bore diameter is 8.5mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 1 x 1.4ml Adapters, Cat. # 022639285 includes: - Full 6 Month Parts and Labor Warranty