Safety cabinet for chemicals and corrosives CSB62 MULTIRISK CHEMISAFE

CABINET CS 120 BASIC PLUS - CHEMISAFE - Completely made of 10/10 mm thick electrogalvanized steel sh (more)eet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - One piece construction with adjustable leveling feet - Possibility of having 1, 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged or double layer doors - Lock and key - Door opening at an angle of 110° which allows the shelves to be pulled out without tilting them - Equipped with fixed or sliding retention shelves in plasticized/painted/stainless steel, with adjustable height - Possibility of having a retention tray on the bottom of the cabinet (see table alongside) - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards - Compliance with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3 shelves in plasticized steel (max load 80 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

Additional technical features: - External structure in steel painted with antiacid epoxy powder - In (more)ner chamber in stainless steel - 45 mm hole on the rear side for flue gas discharge with device for opening / closing the passage of cables, probes, etc. - 10 mm hole on the upper side for inserting the thermometer or probes - Temperature control with microprocessor - Adjustable safety thermostat - Safety class 3.1 - 4 work programs of 8 segments - Repeatability With the optional software you can control the operation of the programs in a very simple way and have all the data under control. Specifically, you can: - Create charts - Archive the history - Check and see all processes on a graph - Optimize times Quality materials: - External structure in steel sheet painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Dimensions: 1200 x 400 x 920 mm

Chart MVE 500 Series MVE510AF-GB Liquid Nitrogen Tank Dewar This was removed from a university lab w (more)here it was surplus to requirements. The unit powers up and we have the password available. We were unable to test it further. It is in good cosmetic condition with marks from use. Model no. MVE510AF-GBRef - 11905075SN - CAB2111410005 Internal dimensions - D91 x W52.5cm6 x Triangular storage holders sized 22 x 23 x 64cm (Blue spacers inside drawers)

Lifting platform Rudolf Grauer Boy 110. Aluminum and stainless steel. Load max. 50 kg Size of platfo (more)rm-12x14 cm Lift style scissor. Control of manual adjustment. Specifications: Height of extension: 14 cm Height folded: 4 cm Ideal for use in fume-hoods fume, the media lab are lifting platforms ultra-stable able to hold a variety of items such as glassware, hot plates, baths and magnetic stirrers. The button adjustment allows height adjustment easy and precise. Constructed of aluminum and stainless steel and with a top plate 12x14 cm, With its system of lift-style scissor, this cat in the laboratory is able to withstand loads of up to approximately 50 kg It is recommended that the cat be lifted as close to the desired height as possible, before the weight is put on it and make final adjustments.

PURELAB Chorus provides a complete solution from tap to ultrapure water direct from a potable water  (more)supply and is ideal for laboratories needing up to 100 liters of 10 MΩ.cm ultrapure water. With its simple and ergonomic design and ease-of-use, water can be dispensed directly from the system or from the dispenser. Dispense Flow rate: >1.5 l/min Inorganics (resistivity at 25°C): 1 to 10 MΩ.cm Organics (TOC): <30 ppb Bacteria: <5 CFU/ml Bacterial Endotoxin: <0.001 EU/ml pH: Effectively Neutral DNase: <5 pg/ml RNase: <1 pg/ml Daily Usage (max): 100 l/day Daily Usage (min): 1 l/day Delivery Flow Rate: 10 l/hr Equipped with: Elga LA760 100 litre storage tank Elga LA824 dispenser Excluding new filters

S+B Hanging cabinet D. Gray 600x330x600

Dimensions (HxWxD): 310/105 x 1630 x 805 mm Worktop (WxD): 1630 x 785 mm Sink (HxWxD): 200 x 400 x 5 (more)50 mm

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 500 g), plastic box Number of  (more)pieces in the set: 24 Weights 1 g i 2 g &ndash; solid masses without adjusting chamber

Julabo DYNEO DD-1000FW Refrigerated Circulator, 115V/60Hz Working Temperature Range -50°C to 200°C  (more)Cooling Capacity 1000W at 20°C Refrigerant R449A Features - Powerful cooling - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 The Julabo DYNEO DD-1000FW Refrigerated Circulator, 115V/60Hz features an operating range of -50…+200°C and ± 0.01°C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multilingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (5-7.5L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 1kW cooling power at 20°C with 110W at -40°C. Options for heating power (1kW or 2kW). 1000FW: cooling water connections G 3/4″ male; contains R449A synthetic refrigerant. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo DYNEO DD-1000FW Refrigerated Circulator, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - G 3/4" Female to 1/2" Hose Barbs for Water Cooling Circuit - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty