Copley DUSA Mittelstück lang mit Auslass Middle long w/ Nozzle

GERHARDT LS5 back and forth agitator Brand GERHARDT Model: LS 5 The drive belts are new, changed on  (more)01-10-2024 With: 2 UB 50 fixing bars, longitudinal and 5 US 25 clamping rollers, transverse Platform surface: 380x540 mm Timer 0-999 min Non-slip rubber mat Movement: Linear Amplitude: 50 mm Minimum speed: 20 rpm Maximum speed: 200 rpm Capacity: up to 30 kg Timer: 1 to 999 minutes Power consumption: 230 V, 50 Hz, 80 W, 0.35 A Overall dimensions (WxDxH): 610 x 510 x 120 mm Weight: 28 kg

Exhaust gases are better removed from the furnace and discharged. The B500 – P580 controllers can b (more)e used to activate the fan automatically (not for models L 1/12, LE 1/11, LE 2/11).

This GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System was removed from a university (more) lab where it was surplus to requirements. The microscope focus motor/Z-Drive has been removed from this unit. We have removed the microscope focus motor/Z-Drive from this system. It is sold for spares/repairs. Included in the system are; 1x GE IN Cell Analyzer 1000: Dims: L85cm W70cm H70cmThe unit is in good cosmetic condition. When connected up to the power supply we could not hear the unit power on.Inside the unit it appears have been tampered with as there are several cables and connector cables not attached to anything the EARTH cable is also not attached. A circuit board has been removed from the unit. this may explain why we could not get the unit powered up. 1x GE IN Cell Analyser 1000 Kinetic OZ EnabledModel No. 28-4051-29System No. 1316043The unit powers on and is in good cosmetic condition.The fans are working, they can be heard powering up immediately once the unit is powered on. 1x GE IN Cell Analyser 1000 ENDPNT OZ EnabledModel No. 28-4051-28System No. 1358008The unit powers on and is in good cosmetic condition. The unit appears to have been stripped only 1x HP Workstation 6200 PC and 1x MVP Series power supply were still inside it. The Kinetic OZ Enabled unit appears to be complete with an Optigrid light imaging system. We have fitted the GE IN Cell Power supply back into the rack unit where it should be housed. EMKA Keys:Model 2233X2x keys for GE IN Cell Analyser 1000 ENDPNT OZ Enabled2x keys for the GE IN Cell Analyser Kinetic OZ EnabledAll 4 keys are in good cosmetic condition and open and lock both the Kinetic and the ENDPNT units. We did not connect up the GE IN Cell 1000 to the GE 1000 Kinetic OZ Enabled unit as one of the communication cable connections at the back of the rack has come away and will need to be fixed back on. Without this being fixed we do not believe the systems to be aware of each other. 1x Optigrid Light Imaging System:Model QIOPTIQThe unit powers on and is in good cosmetic condition. 1x Xenon ARC Lamp Power supply w 2x keys:Type 6Part No. 56409187The unit powers on and is in good cosmetic condition. The keys do not fit in the barrel well and do not turn. The LCD screen is working and reads clearly. Keys:model No. 901The units are in good cosmetic condition 2x MVP Series Power supplies. ( 1x in each rack unit)Model Nos. MP8-3Q-1L-00Both units power on and are in good cosmetic condition. There is dust around and on both units from general use. 1x Hamilton power supplyModel No. 231352/00The unit powered on and is in good cosmetic condition. 2x APC rack PDUThe units power on and are in good cosmetic condition. 1x GE cO2 Controller:Ser No. 1352436The unit powers on and is in good cosmetic condition. The LCD screen is working and reads clearly. All dials and switches appear responsive to the unit. 2x Hewlett Packard PC's: HP workstation xw6200:The units both power on and are in good cosmetic condition.There is some dust around the units from general use. Programs on PC:•Overlord 2Version 2.1.0.0 •IN Cell Analyser 1000 3.5•IN Cell Analyser 1000 3.6The program is password protected and we could not get past this window to access other parts of the program. 'Shutter Counter 1984048'. 3 x Low Voltage Computer Cables:•28-4060-63 Umbellcal Axis 0734•28-4060-66 0647•28-4060-68 Umbellcal Hamilton 0738 1x Xenon lamp Bulb:Model OSRAM XBO 100W OFRThe box had been opened. We cannot confirm if this lamp has been used. The unit was in good cosmetic condition.

Thermo Haake A25 refrigerated circulating bath with SC150 controller. Capacity 12 L. Flow rate 17 L/ (more)min. LCD screen. Two levels of pump speed adjustment. Temperature range -25 °C to +100 °C. Stability ± 0.02 °C. Maximum pressure 300 mbar. Communications RS485, Ethernet/LAN, analogue I/O. Audible and visual alarm. Dimensions (LFA): external 483*273*711 mm; internal 184*204*173 mm; 36.1 kg. User manual. Improve the accuracy and efficiency of your experiments with the Thermo Haake ARCTIC A25 with SC150 controller, the ideal refrigerated circulating bath for laboratories that demand precision and reliability. With a temperature range of -25°C to 150°C and a capacity of 6 liters, this equipment provides exceptional thermal control and versatility in multiple applications. Its digital display and efficient circulation pump ensure even heat distribution, while advanced safety features offer peace of mind and protection. Optimize your processes and obtain accurate results with the Thermo Haake ARCTIC A25 with SC150 controller!

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Labconco 9000620 WaterPro PS/HPLC Polishing Station, 115V, 60HzFeatures - Timed dispense for unatte (more)nded operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000620 WaterPro PS/HPLC Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty