Bio Data Platelet PAP 4-C Aggregation Profiler

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dimensions (HxWxD): 1950 x 710 x 650 mm Internal dimensions (HxWxD): 1730 x 490 x 400 mm Fire class: (more) 120 minutes

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Block capacity: 2 (not included)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Mast Uri Well. The unit is in full working condition and is ready for immedia (more)te release. The Mast Uri Well is a cutting-edge dispensing aid that features a 96 LED template, specifically designed for the streamlined transfer of urine samples in the diagnostic process for urinary tract infections (UTIs). Key Features: 96-Well Template: The innovative design allows for efficient sample transfer across 96 wells simultaneously, facilitating bacterial identification and antibiotic susceptibility testing (AST). Semi-Automated Solution: Integrates seamlessly into the Mast Uri System, combining manual and automated processes for optimal laboratory performance. Benefits: Increased Efficiency: Automating the sample transfer minimizes manual handling, decreasing the time spent on sample preparation and allowing lab technicians to focus on other critical tasks. Improved Accuracy: The precise placement provided by the 96-well template minimizes risks of contamination and mis-identification of samples, ensuring reliable results crucial for patient outcomes. Enhanced Throughput: The streamlined workflow enables laboratories to process a higher volume of samples in shorter turnaround times, essential for timely diagnosis and treatment of UTIs. Cost Savings: By reducing the need for manual handling and minimizing waste through efficient sample management, the Mast Uri Well contributes to overall cost reductions in laboratory operations.

Labconco CentriVap Ultra-Low Cold Trap, -85 C Brushed, Stainless Steel and Powder-Coated Steel E (more)xterior Illuminated Temperature Graph with Endpoint Indication (Operating temperature of -40C) HCFC-Free Refrigerant System 1/3 hp Compressor (Reaches -84C in less than 40 min.) 4-liter, Stainless Steel Collector Acrylic or Stainless Steel Lid (with 2 Quick-Disconnect fittings for connection to a CentriVap Concentrator) Stainless Steel Drain Port (with corrosion-resistant, nylon valve) INCLUDED: The Labconco 7460020 CentriVap Ultra-Low Cold Trap, -85 C, 115V, 60Hz includes: - Tubing - Clamps x 2 - Wire Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 10000 model (measured with ethanol): - a 20°C, 10.00 kW - a 10°C, 7.60 kW - a 0°C, 5.30 kW - a -10°C, 3.50 kW - a -20°C, 2.00 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Hiden Isochema Model: IGAsorp Dynamic Vapor Sorption Analyzer S/N: IG-SA-069 Descripti (more)on: IGAsorp Dynamic Vapor Sorption Analyzer is a fully automated compact benchtop DVS analyzer, for fast and accurate sorption measurements using the dynamic flow technique for water and organic solvents. Measured vapor uptake isotherms and kinetics are used to characterize, test and evaluate materials in precisely defined environmental conditions. An ultra-sensitive microbalance measures changes in sample mass as a function of humidity and temperature. Humidity is determined by relative mixing of wet and dry gas streams, and is measured and regulated at the sample position. These factors combine to offer unrivalled performance and total baseline stability. The IGAsorp uses the unique IGA method for the determination of the sorption kinetics and equilibrium isotherms. This ensures accurate and consistent analysis with faster analysis times making the optimum use of instrument time. Hiden Isochema’s unique IGA method is applied independently to every step in a gravimetric sorption measurement. At each step, the humidity and temperature are actively regulated, with resultant changes in sample weight continuously recorded. The kinetic weight data is analyzed in real-time, and the trend toward equilibrium is predicted and displayed on screen. Equilibration criteria are applied to objectively determine the period allowed before the measurement moves on to the next pressure or temperature value. Each equilibrium point is plotted on an isotherm or isohume, and the full raw data is also recorded. The IGAsorp therefore allows consistent analysis with optimum measurement accuracy and faster overall process times. Benefits and features: - Unrivalled performance and total baseline stability- Fast and accurate analysis of equilibria and kinetics using the IGA method- Market-leading weight stability, temperature and humidity control- Unrivalled measurement precision, accuracy and resolution- Operation with water and organic vapors- Built-in user conformance tests for weight, temperature and humidity verification- High security 21 CFR Part 11 compliant software option with 3 user privilege levels- Advanced analysis features including diffusion coefficients, permeation rates and more Types of measurements that can be recorded: - Isotherm and kinetics analysis- Cyclic/lifetime studies- Moisture content determination- Hydrate analysis- Permeation and diffusion studies (MVTR)- Amorphous phase detection Types of materials that can be tested: - Polymers- Textiles- Pharmaceuticals- Porous materials- Packaging materials- Building and construction materials- Food products and other consumables- Wood, fibres, clays and other natural materials Key areas: - Pharmaceutical- Biotech- Polymers and packaging- Natural materials- Building and construction materials (cement, timber, insulation, adhesives)- Electronics- Fuel cells (proton exchange membranes) DVS applications: - Quality control- Hydrophobicity, product stability and shelf life- Water activity and water content determination- Polymorphism: amorphous phase detection and quantification- Diffusion and permeation including vapor transmission rate (MVTR/WVTR) analysis Application data: - Amorphous phase detection:A simple test to detect amorphous phase transition- Permeation study:MVTR results from a polmer film- Kinetics analysis:Example of an isothermal kinetic response data- Isotherm analysis:Comparison between isotherms at course and medium resolution- Hydrate analysis:Example of a hydration-dehydration cycle- Diffusion study:Variation of the microscopic diffusion coefficient with relative humidity Specifications: Weight:- Capacity: 5 gram- Weighing range: 25 / 200 / 1000 mg (fixed) or user selectable (optional)- Resolution: from 0.05 microgram- Stability: nominal +/- 1 microgram / weekHumidity:- Control range: 0 to 98 %RH- Absolute Calibration Accuracy: +/-1 % (0-90 %); +/-2 % (90-100 %)- Regulation accuracy: +/- 0.01 %RH- Minimum control increment: 0.02 %RH- Gas Supply: Dry air, N2 or He- Maximum flow rate: 500 ml/minTemperature:- Measurement range: 5 – 50 °C- Regulation accuracy: +/- 0.01 °CPower requirements: 240V 50Hz Items delivered: - Hiden Isochema IGAsorp Dynamic Vapor Sorption Analyzer- Connecting Cable Condition: The item is in very good condition - cosmetic, technical and working. It operates as intended and functions properly being 100% functional tested. The Hiden Isochema IGAsorp Dynamic Vapor Sorption Analyzer is ready to use!