Benchmark IPD9600-50S 50ml grinding jar, stainless steel, pack of 2

IKA Pette multi 8 x 0.5 - 10 µlLies comfortably in your hand with uncompromising precise performance (more): IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 8 x 0.5 - 10 µl includes: - Two Year Manufacturer's Warranty

Labconco SecondaryVacuum Trap, 2L, 9-3/4" h x 7-7/8" dia. with 1/2" connectionForprocessing samples  (more)with low eutectic points. Trap connects in series with afreeze dry system or vacuum evaporation system and vacuum pump to preventcontaminants from migrating into the vacuum pump. An insulated well, when dryice and solvent are added, cools to approximately -75C (-103F). When usedalone, Dry Ice Secondary Trap may serve as an inexpensive collector. Simplyconnect a sample directly to the incoming port and add a vacuum pump to theoutgoing port. Dry ice and solvent, such as alcohol, are required (notincluded).INCLUDED: The Labconco 7538200 SecondaryVacuum Trap, 2L, 9-3/4" h x 7-7/8" dia. with 1/2" connection includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Hewlett Packard HP 6890 Series GC System was removed from a university lab where it was surplus (more) to requirements. The unit has been powered up but not tested further at our facility. The lab said it had been serviced in May 2022 and so should be in good working order. Included are; 1 x Hewlett Packard HP 6890 Series GC SystemG1540A 1 x HP GC AutosamplerG1512AX 1 x Agilent 6890 Series InjectorG1513A 1 x Hewlett Packard 5973 MassSelective Detector. Accessories: Cables: 1x 9pin FEMALE to FEMALE RS232 Cable: Part no, G1530-60600•TO6890AAuto Sampler to GC - GC to Data Box (Data Box is missing from system) 1x 9pin MALE to Male RS232 Cable:Part no. G1530-60930Top Remote on GC - Data Box 2x Hewlett Packard Controller Cables:Part no's.• 10833B•10833D

Polyscience WBE02A11B 2L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz3D Visualization of the P (more)olyscience General Purpose Water BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience WBE02A11B 2L Digital Water Bath is designed to handle a wide range of laboratoryprocedures including: incubation, inactivation and agglutination as well asmost pharmaceutical, serological, biomedical and industrial procedures.To ensure optimium temperature uniformity, your Water Bathfeatures an energy efficient, large-area heater and thermostatic control. ItsPID microprocessor control (Proportional Integral Derivative) system providesproportional heat control by anticipating the approach to your set pointtemperature and preventing overshoot. A redundant safety thermostat is standardon all models.Features Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Click Here to View Product Video INCLUDED: The Polyscience WBE02A11B 2L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz includes: - Manufacturer's Documentation - Power Cord - Operator's Guide - Full 2 Year Parts and Labor Warranty Polyscience WBE02A11B 2L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz SpecificationsKey SpecificationsDescriptionGen. Purpose Water Bath, Digital, 2 LDisplay3.25" LCDWorking Temperature Range CAmbient +5° to 100°Temperature Stability C±0.1°Temperature Calibration Capability1-pointWorking Access (L x W x D) (cm)9.9 x 10.9 x 15.2Flammability Class (DIN 12876-1)I (NFL) 60 Hz OnlyPart NumberWBE02A11BIncluded HardwareSample TrayHeater Wattage120Electrical Requirements (VAC/Hz/Ph/A)120/60/1/1.1Regulatory ApprovalsETL Comparison of ModelsSpecificationWBE02A11B 2LWBE05A11B 5LWBE10A11B 10LWBE20A11B 20LWBE28A11B 28LDescriptionGen. Purpose Water Bath, Digital, 2 LGen. Purpose Water Bath, Digital, 5 LGen. Purpose Water Bath, Digital, 10 LGen. Purpose Water Bath, Digital, 20 LGen. Purpose Water Bath, Digital, 28 LDisplay3.25" LCD3.25" LCDFull-color TFTFull-color TFTFull-color TFTWorking Temperature Range (°C)Ambient +5° to 100°Ambient +5° to 100°Ambient +5° to 100°Ambient +5° to 100°Ambient +5° to 100°Temperature Stability (°C)±0.1°±0.1°±0.1°±0.1°±0.1°Temperature Calibration Capability1-point1-point1-point1-point1-pointWorking Access (L x W x D) (cm)9.9 x 10.9 x 15.212.7 x 27.4 x 15.226.9 x 29.5 x 15.224.1 x 43.2 x 15.224.1 x 43.2 x 15.2Flammability Class (DIN 12876-1)I (NFL)I (NFL)I (NFL)I (NFL)I (NFL).comparison-table tr td:nth-child(2) { background-color: #fffacd; }

The VELP stirring rod with turbo propeller is ideal for medium/high viscosity ranges and medium/high (more) speeds. Compatible with Velp Scientific ES, LS, DLS, LH, DLH, PW, OHS pole stirrers. The stirrer shaft generates an axial flow with top-down suction of media and low shear forces.

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

ZWIEBEL calibration weight 100mg class F1 INOX Stainless steel laboratory calibration weight Brand:  (more)ZWIEBEL Weight: 100 mg Type / class: F1 maximum permissible error: ± 0.05mg Weight checked on a precision balance at 0.0001g (0.1mg) - see photo In its plastic box uncalibrated weight