Benchmark DC0650 DryChill Ice-Free Cooling Block, 6 x 50ml

The ClonePix FL builds on the success of the Genetix white light ClonePix adding fluorescent imaging (more) capabilities for more intelligent selection. The unique proprietary technology behind ClonePix FL represents a major advance in cell line selection and development, significantly reducing the time and costs associated with new biopharmaceutical product development especially when compared to standard techniques such as limited dilution or cell sorting. Specification: White light imaging- Trans-illumination for imaging low contrast colonies such as adherent monolayers or small colonies in suspension. Epi-illumination for imaging colonies as they are collected Fluorescence imaging- Software-controlled switching between up to 5 excitation /emission filter pairs (we recommend no more than 3 filters be multiplexed for optimal performance) Data tracking- Internal barcode reader for source and destination plates enables data tracking for each run Camera- Integrated 16-bit cooled CCD camera Imaging speed- 6-well microplate: 5 min for 2 wavelengths (standard conditions) Resolution- Standard: 28 micron; Maximum: 1.5 micron Containment- Fully enclosed working environment with Class 100-type, HEPA filtration Source plate type- PetriWell-6 plate, PetriWell-1 plate, Greiner 6 well plate, Nunc 6 well plate, Nunc OmniTray Destination plate type- PetriWell-96 plate, Costar 96 well plate, Greiner 96 well plate, Nunc 96 well plate, Falcon 96 well plate Source plate capacity- 10 plates Destination plate capacity- 10 plates Picking head- 8 x picking pins – each pin independently controlled Picking pin size- Diameter of picking pins is application specific – F1: suspension cells, F2: adherent cells Picking speed > 200 clones per hour Wash bath- Ethanol wash bath, automatically refilled Picking system fluids- 5 L sterile water supply, 5L waste bottle Pin drying- Proprietary halogen pin drying station

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Eppendorf 022653041 Aerosol-Tight Rotor FA-45-24-11, PTFE Coated The Eppendorf 022653041 Aerosol-Tig (more)ht Rotor FA-45-24-11, PTFE Coated for 1.5/2 mL Tubes, 24-Place is for use with microcentrifuge models 5424. The rotor has a maximum rotational speed of 15,000 RPM and is used for centrifugation of standard application lab samples. The rotor has a 24-place tube array that holds 1.5 mL/2.0 mL tubes, and is specially PTFE coated for working with hazardous samples. This fixed-angle rotor is an accessory for use with Eppendorf centrifuge model 5424, which spins biological lab samples at high speeds to separate cellular material into component parts.

IKA PETTE MicroKit A Vario: 0.1-2 ul, 0.5-10 ul, 10-100 ul, Linea Stand, Tip xs box, Tip s box Desig (more)n Air Displacement Piston Operated Volume Variable Number of Channels 1 Channel Features - Mechanical air-cushion pipettes manufactured in Germany - Fully automated calibration by robots - Volume-locking feature to prevent any accidental volume changes - Large and clearly visible display - Ergonomic and lightweight pipette with low pipetting and tip ejection forces to reduce strain and fatigue - Durable and robust construction using high quality UV resistant and chemical resistant materials - Fully autoclavable to ensure sterility and compliance to stringent laboratory standards - Maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance The IKA PETTE MicroKit A Vario includes mechanical air-cushion pipettes with a variable volume range of 0.1-2 µl, 0.5-10 µl, and 10-100 µl. These pipettes feature fully automated calibration by robots and a volume-locking feature to prevent accidental volume changes. The large and clearly visible display, along with the ergonomic and lightweight design, ensures low pipetting and tip ejection forces, reducing strain and fatigue. Built with high-quality UV and chemical-resistant materials, these pipettes are durable, robust, and fully autoclavable for sterility and compliance with stringent laboratory standards. The kit includes a Linea Stand, Tip xs box, and Tip s box, offering maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance.INCLUDED: The IKA PETTE MicroKit A Vario: 0.1-2 ul, 0.5-10 ul, 10-100 ul, Linea Stand, Tip xs box, Tip s box includes: - IKA PETTE vario 0.1-2 µl - IKA PETTE vario 0.5-10 µl - IKA PETTE vario 10-100 µl - IKA Linea - Tip s box (96 tips) - Tip xs box (96 tips) - Two Year Manufacturer's Warranty

Benchmark IPS2050-P-S4 Included propeller, stainless steel 4 arm The Benchmark IPS2050-P-S4 Included (more) propeller is for use with Benchmark's OS20 and OS40 Series Overhead Stirrers. INCLUDED: The Benchmark IPS2050-P-S4 Included propeller, stainless steel 4 arm includes: - Benchmark IPS2050-P-S4 Included propeller, stainless steel 4 arm - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Measurement range: 0°C – 100°C

Perkin Elmer 200 Series AutoSampler This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but is showing a flush motor fail error. It is sold for spares/repairs.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Fully Antistatic Weighing Chamber Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. How will you get an even more accurate weighing result? This will be ensured by a special antistatic glass coating that compensates for electrostatic charges on the sample and laboratory accessories. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Ohaus 30400155 Modular Heat Block, 6 x 25 mm Tubes The Ohaus 30400155 Modular Heat Block, 6 x 25 mm  (more)Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400155 Modular Heat Block, 6 x 25 mm Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty