Benchmark D1132-10TP Bulk Beads, Zirconium, 1.0mm, Triple-Pure Molecular Biology Grade, 250g

Benchmark H5100-05 24 x 0.5ml Block for MultiTherm Touch The Benchmark H5100-05 24 x 0.5ml Block for (more) MultiTherm Touch is designed for use with the Benchmark H5100-HCT MultiTherm Touch Heating and Cooling Shaker. The H5100-05 is compatible with the H5100-HL Heated Lid. INCLUDED: The Benchmark H5100-05 24 x 0.5ml Block for MultiTherm Touch includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Motic LUMOS Fluorescence LED High Powered Light Source Objectives Optional Optical System Spectrums (more) ranging from NUV to visible to NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Features apochromatic design - Compared to the lifespan of only 200 hours and the high cost of mercury-arc lamps, the LUMOS FL provides over 20,000 hours of use - No light toxicity like traditional mercury-arc lamps which can damage samples with infrared light heat toxicity - Instant On/Off: Unlike traditional mercury-arc lamps which take up to 20 minutes to reach optimal brightness levels when turned on, the LUMOS FL is ready for use at the flip of a switch - Dose not pose toxic gas danger to users - Avoids stray light interference during observation, helping to avoid errors in user interpretation of images - Individually controls each LED channel and eliminates need for multiple filters therefore reducing filter cube expense - Features a broad spectrum spread which can satisfy multiple user applications Do more with your Motic microscope setup with the cutting-edge Motic LUMOS Fluorescence LED High Powered Light Source. With this high-performance plug and play illuminator device, you will obtain stunning multi-channel images that can be seamlessly overlaid using our intuitive imaging software. Featuring UV, blue and green color LED channels, with ultra-accurate wavelengths and contrast provided by its black background, this accessory yields sharp images without the need for constant bulb changes or an alignment. INCLUDED: The Motic LUMOS Fluorescence LED High Powered Light Source includes: - Control Box - DC Power Supply - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 16-Port Drying Chamber, PTFE-coatedThe 16-PortDrying Chamber with PTFE is made of type 304  (more)stainless steel with acorrosion-resistant PTFE-coated interior. Includes 16 neoprene valves withplastic knobs that accommodate both 1/2" and 3/4" adapters forconnection of flasks, a 3/4" thick arcylic lid with neoprene gasket, andone latching pin. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18Liter Freeze Dryers.DryingChambers provide a means to attach flasks to your freeze dryer or containsamples in bulk.INCLUDED: The Labconco 7522901 16-Port Drying Chamber, PTFE-coated includes: - Neoprene Valves x 16 (accomodates 1/2" & 3/4" adapters) - 3/4" Thick Acrylic Lid with Neoprene Gasket - Latching Pin - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

COMBISTORAGE 120 FIRE TYPE 90 CERTIFIED SAFETY CABINET - CHEMISAFE General features: - Completely ma (more)de of 1 -1.5 mm thick galvanized steel sheet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with fire dampers which close the ducts when the temperature is higher than 70 °C according to DIN 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded - Adjustable leveling feet - Lock and key - Height-adjustable shelves in painted or stainless steel - Shelf fixed with aluminum pins, excluding all risks of sparks - Fire resistant shelves - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470 and EN16121 standards - DOOR OPENING TO THE LEFT, opening with door to the right on request INTERNAL COMPARTMENTS for the storage of various families of chemicals: - Separation by means of 18 mm thick HPL panels covered with thermo-expanding gaskets (possibility of having up to 3 compartments and customization compartments - do not hesitate to contact us) Supplied: - COMPARTMENT FOR FLAMMABLES: 3 painted steel shelves + 1 retention tank with grid - COMPARTMENT FOR ACIDS: 2 plasticized steel shelves - COMPARTMENT FOR BASES: 2 stainless steel shelves - COMPARTMENT FOR TOXIC SUBSTANCES: 1 painted steel shelf (max load 60 kg evenly distributed) Optional: - Shelves - Visual and acoustic alarm - Timer - Fire extinguisher - Electric aspirator - Activated carbon filter - Molecular suction system

The Waters Acquity UPLC Binary Solvent Manager delivers solvent compositions for isocratic and binar (more)y gradient methods at flow rates of 0.01 to 2.0 mL per minute.  The binary solvent manager’s two pump channels permit quick solvent changeovers at a flow rate of 4.0 mL per minute. Low-volume degasser channels (480 µL internal volume), automated solvent-selection valves, and an automated vent valve make the quick changeovers possible.  The pump accommodates up to four chromatographic solvents and one Binary Solvent Manager Seal wash solvent.

IKA C 200 h auto Semi-Automated Halogen Resistant Calorimeter w/ Automated Water Handling Measuring  (more)Range Max. 40000 J Measuring Time Dynamic Approx. 8 min Cooling Medium Permissable Operating Pressure 2 bar Features - Compact, space-saving, and cost-effective design for educational and low-volume industrial laboratories - Capable of measuring calorific values for liquid and solid samples - Four operation modes: isoperibol, dynamic, manual, and time-controlled (14 min). - Semi-automated system with manual water and oxygen handling, and optional automation available - Closed-loop water circulation with optional RC 2 basic chiller for improved reproducibility and efficiency - Includes C 5012 decomposition vessel, suitable for high-halogen and sulfur samples (3%) - Operated via C 6040 CalWin software for monitoring, multi-calorimeter management, and data export - Compatible with DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711, GOST 147, GOST 21261 - Compact dimensions (15.7 x 15.7 x 15.7 in.) and lightweight (46.3 lb.) for ease of installation - Installation and calibration consumables included for seamless setup The IKA C 200 h auto Semi-Automated Halogen Resistant Calorimeter w/ Automated Water Handling allows operating the C 200 with a completely automated water cycle. This results in ease of handling and saves valuable time especially for laboratories with a low number of analyses. The water circulates in a closed loop and is kept at a constant temperature by using a recirculating chiller. This leads to shorter preparation time for each experiment and even better reproducible results. The semi-automated and conforming-to-standards combustion calorimeter determines the gross calorific value of liquid and solid samples. So far it has mainly been used for teaching and training purposes at technical schools and universities. Due to the automated water handling it is now also suitable for industrial laboratories with low number of analyses. The catalytic activated, halogen resistant decomposition vessel C 5012 is specifically designed for the combustion of samples that contain halogens and sulfur ( 3 % ). The material of the decomposition vessel (Hastelloy) prevents corrosion caused by samples with high chlorine content. The catalytic activated inner-surface leads to higher recovery rates in case analysis of halogens and/or sulfur is required after the combustion. Four different operation modes enable the user to control the measuring times according to individual requirements: Isoperibol: approx: 17 min. Dynamic : approx. 8 min Manual : approx. 17 min (depends on the operator) Time controlled : 14 min Measurements are possible according to e.g. DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711. The software C 6040 CalWin controls the unit and monitors the measurement of the samples. Additionally, collected data can be exported to e.g. Excel, Word, SQL and LIMS for further analysis. It is possible to operate several calorimeters with one PC. A PC is not part of the scope of delivery and needs to be provided by the operator. CalWin is sold separately. INCLUDED: The IKA C 200 h auto Semi-Automated Halogen Resistant Calorimeter w/ Automated Water Handling includes: - C 5012 Decomposition Vessel, Halogen Resistant - C 200.2 Conversion Kit for C 5012 - C 200.RC Set of Hoses - RC 2 Basic Recirculating Chiller - C 248 Oxygen Filling Station - Ignation Adapter - Water Emptying Hose - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Branson Disruptor horn 3/4 in dia. Threaded with solid tip Disruptor horn, 3/4″ diameter, threaded w (more)ith solid tip, used with Branson SFX250, SFX550, S250A, and S450A sonifiers; used for processing volumes of 25 – 500 mlINCLUDED: The Branson Disruptor horn 3/4 in dia. Threaded with solid tip includes: - Manufacturer's Documentation Request a Formal Quote

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW