Benchmark D1131-05 Bulk Beads, Silica (glass), 0.5mm, acid washed, 200g

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Complete UV-VIS operation from 195 nm to 800 nm. 7 mm Pathlength, 10 µl Volume Double beam optics (R (more)eference and Sample Paths). Eight absorbance ranges via scrolling up and down controls. Sensitivity levels available for over 95% of all applications. Digital read-out of absorbance and wavelength. Analog outputs for absorbance and wavelength available at rear of instrument. Absorbance and wavelength remote control available via rear connector contact closures. Scrolling selection of wavelength.

VACUUBRAND MD 4C NT +AK+EK Chemistry Vacuum System Ultimate Vacuum 1.5 mbar Max. pumping speed at  (more)60 Hz 2.2 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and very low vibration - Excellent environmental friendliness due to efficient solvent recovery This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors in chemical, biological and pharmaceutical laboratories. This system is ideal for high vacuum requirements with high boiling solvents. Typical applications are rotary evaporators and drying ovens. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling of solvents and active protection of the environment.INCLUDED: The VACUUBRAND MD 4C NT +AK+EK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Block for 1 x Micro Plate The Benchmark Block (for one Micro Plate) for use with the Multi (more)Therm Heating Shaker or MultiTherm Heating and Cooling Shaker is discounted, brand-new, and includes free shipping with a one year warranty. This Benchmark Block is ready for immediate shipment.

Thermo Scientific HERACELL 150i GP Co2 incubator / oven In excellent condition, only used 6 months.  (more)Thermo reference: 51032719 Years of manufacture: 2021 Forced convection Volume: 151 liters Stainless steel chamber iCAN touch screen Patented humidification system without water tray for rapid return to set points Temperature regulation range. : TA+3 at 55°C Constant humidity: 95% ± 3 Hr CO2 regulation range: 0 to 20% Heat emission at 37°C: 0.06 kWh/h CE certification 230 V, 50/60 Hz Ext. sun. (L x H x D) mm: 637 x 867 x 782 Sun Int. (L x H x D) mm: 470 x 607 x 530 Weight: 70 kg Supplied complete with: 1 CO2 thermal conductivity (CT) sensor 1 water level sensor 3 stainless steel shelves 423 x 465 mm 1 42 mm cable passage 1 interior glass door with closure Tested at 37°C CO2 at 5% Year of manufacture: 2021

The Eppendorf CellTram Air 5176 Pneumatic Manual Microinjector utilizes air for pressure transmissio (more)n to guarantees clean and simple handling of a piston pump. Change in volume: 88 µl Adjustable total volume: 2,640 µl Max pressure: 20,000 hPa Dimensions: 175 x 60 mm Weight: 1.4 kg

This Gallenkamp Digital Flame Analyser FGA-350-L was removed from a university lab where it was surp (more)lus to requirements. The system powers up and is in good cosmetic condition with minor marks from use. We were able to get it to produce a spark. The lab confirmed that it was working prior to removal. With it is; 1 x Lafert air compressor pump:Model LM 63/4The unit powers up but has not been tested further.

BOC Edwards Scroll Vacuum Pump XDS5 A724-01-903 This system was removed from a university lab where  (more)it was surplus to requirements. The unit is in very good, clean condition and is in working order. Specifications:- Model: XDS5 A724-01-903 - Serial No.: 056314619

This ILab 650 Automatic Biochemistry Analyzer Clinical Chemistry System was removed from a universit (more)y lab where it was surplus to requirements. The system is in full working order and was in use right up until its removal. We have a video of it working prior to removal. It comes with the following parts/accessories/spares PC Accessories include:-PC - See photos of software working in attachmentsViewSonic 17" MonitorKeyboard, Mouse & USB Cable Power supplyPN - 241-03110SN - 62R1753 6/8KD Sample Wheel Holds 75 x 5ml tubes2 x Cuvette Carousels Bottle/ContainerPN - 241-01000-51SN - U00704000496C1 Other Accessories/Consumables:-2 x Shimadzu Lamp - PG-64258/ME-MLP2 x Reagent Probes - 0018470500Box of 20 x RGT Bottle 25mlBox of 10 x RGT Bottle 20mlBag of 6 x Brown 20ml BottlesBag of 10 x RGT Bottle 50mlBag of 19 x RGT Bottle 25mlBag of 4 x 25ml RGT AdaptorsBag of 12 x 50ml RGT AdaptorsBox 3 x 5X5 CuvettesBox of 30+ Assorted size bottles it is in reasonably good cosmetic condition but has some marks from use.

IKA RV 10 Auto Pro V Flex Rotary Evaporator Features - 4L heating bath optimized for rapid achieveme (more)nt of working temperature, with a temperature safety circuit and boil-dry protection - Integrated vacuum controller and timer function - Bright, high-contrast, TFT, color-graphic control panel with simple menu navigation and programming for up to ten individual procedures - Automatic cooling water management, heating bath management, and ventilation - Right or left flask rotation with push-off mechanism for tightly-fitting flasks - Digital interfaces: USB port and RS-232 interface for remote control Motorized lift with Safety-Stop function, which lifts the receiving flask from the heating bath in case of a power failure Precise setting of distillation method per solvent with direct volume and efficiency control Integrated solvent library with 40 preset solvents and the ability to expand to incorporate new processes The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative handling concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The receiving flask and the condenser are also available in coated versions. The USB port or the RS-232 interface enable remote control with the IKA “labworldsoft” software package and an update option with the firmware update tool. The device comes complete with vacuum hoses and hose connectors for your in-house cooling water supply. The new IKA Vacstar digital included in the package is controlled directly from the drive unit of the RV 10 auto via the data cable provided. INCLUDED The IKA RV 10 Auto Pro V Flex Rotary Evaporator includes: - RV10 control - HB digital S099 Heating Bath - IKA VACSTAR digital Vacuum Pump - RV 10.900 Glassware vertical - RV 10.73 Vapor tube (NS 24/40) - RV 10.8001 Seal - RV 3.4 Woulff bottle - RV 3.1 Support pole - Vacuum hose (2 x 0.55 m) - Water discharge hose (1 x 1 m) - Water discharge hose (1 x 1 m) - USB cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 10 Auto Pro V Flex Rotary Evaporator SpecificationsType of coolingVertical condenserCooling surface1500 cm2Speed range5 - 300 rpmReversible direction of rotationyesSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftMotorStroke140 mmHeating temperature rangeroom temp. - 180 °CHeat output1350 WSet temperature resolution1 ±KFilling volume max.4 lVacuum controller integrated yesTimer yesVacuum pumpVacstar digitalDimensions (W x H x D)500 x 430 x 440 mmWeight52.34 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesAnalog outputyesVoltage100 - 240 VFrequency50/60 HzPower input100 WPower input standby3.3 WComparison of ModelsSpecificationRV 10 Auto Pro V FlexRV 10 Auto VRV 10 Digital VRV 3 VRV 8 VType of CoolingVertical CondenserVertical CondenserVerticalVerticalVerticalSpeed Range5 - 300 rpm5 - 300 rpm5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorMotorMotorManualManualStroke140 mm140 mm140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CTimerYesYesYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm500 x 430 x 440 mm500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmWeight52.34 kg34.96 kg32.36 kg28.3 kg25.76 kgRS 232 InterfaceYesYesYesN/AN/AUSB InterfaceYesYesYesN/AN/AVoltage100 - 240 V100 - 240 V220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }Request a Formal Quote