Benchmark BV1010-1520 Tube Rack, 50 x 1.5/2.0ml (10mm)

Boekel Scientific 145951 Illuminated Tissue Bath w/ Dryer & Orienter Block, 115VThe BoekelScient (more)ific 145951 Illuminated Tissue Bath w/ Dryer & Orienter Block is adigital microprocessor control tissue flotation bath with a heated Slide DryingBlock Module and a Heated Slide Orienting Block Module. The unit has advancedsafety over temperature protection and bright white LED's for basinillumination. 2 year warranty and manufactured in the USA. Precision temperature controlled water bath eliminates wrinkles and distortion during preparation of paraffin embedded tissue sections Digital Microprocessor Control with advanced safety over temperature protection L.E.D. illuminated black background with transparent PYREX® dish; allows specimen to be easily seen A nonvolatile memory retains the last temperature set point after power off/on Deluxe Model includes the Slide Dryer and Tissue Orienter Blocks Supplied with a removable PYREX® dish 2 year warranty Units are certified to UL61010-1, CSA C22.2 and CE approvedINCLUDED: The Boekel Scientific 145951 Illuminated Tissue Bath w/ Dryer & Orienter Block, 115V includes: - Pyrex Dish - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Including 2 cartridges and vacuum workstation.

Dimensions (HxWxD): 2730 x 2400 x 880 mm

The Ci3000+ Weather-Ometer with its advanced digital control systems, represent monumental achieveme (more)nts in applying digital and optical technologies in easy-to-use laboratory weathering instrument. The 3000 Series is approved by many OEMs in the textiles, paints & coatings and plastics industries as the exclusive platform to deliver accurate, reproducible and repeatable results for predicting service life. The 3000 Series has been certified CE, UL, CSA, ISO and EN compliant. 4500 W water-cooled xenon arc lamp Total exposure area of 2,188 cm2 TFT full color 12″ touch screen control panel display of all test parameters Direct setting and control of Black Panel Temperature, uninsulated (BPT) or insulated (BST) Direct setting and control of relative humidity Direct setting and control of specimen chamber air temperature Display of diagnostic messages 14 factory pre-programmed test methods Space for 12 custom programs, sub-cycle capability SmartDamper to reduce test variability in chamber temperature and humidity and compensates for changes in ambient lab conditions SmartLight Monitor verifies that correct light capsule is installed Chamber viewing window in door Meets CE, UL, ISO EN and CSA safety requirements Automatic test countdown based on time or radiant exposure VibraSonic Humidification System Calibrated xenon reference lamp Water purity indicator Standards: AATCC TM16-2004: Colorfastness to Light AATCC TM 16.3 (2014): Colorfastness to Light, Xenon-Arc AATCC TM169: Weather Resistance of Textiles: Xenon Lamp Exposure ASTM C1442: Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus ASTM D2565: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications ASTM D3424: Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter ASTM D4303: Standard Test Methods for Lightfastness of Pigments Used in Artist Paints ASTM D4355: Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water ASTM D4459: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications ASTM D4798: Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method) ASTM D5071: Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus ASTM D6551: Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus ASTM D6695: Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings ASTM D7869: Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings ASTM D904: Standard Practice for Exposure of Adhesive Specimens to Artificial Light ASTM G151: Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources ASTM G155: Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials GME 60292: Designation of Colour Fastness and Resistance to Artificial Light IEC 60068-2-5: Environmental testing – Part 2-5: Tests – Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering ISO 105-B02: Textiles – Tests for colour fastness – Part B02: Colour fastness to artificial light: Xenon arc fading lamp test ISO 105-B04: Textiles – Tests for colour fastness – Part B04: Colour fastness to weathering: Xenon arc test ISO 105-B07: Textiles – Tests for Colour Fastness – Part B07: Colour Fastness to Light of Textiles Wetted with Artificial Perspiration ISO 105-B10: Textiles – Tests for colour fastness – Part B10: Artificial weathering – Exposure to filtered xenon-arc radiation ISO 12040: Graphic technology – Prints and printing inks – Assessment of light fastness using filtered xenon arc light ISO 16474-1: Paints and varnishes – Methods of exposure to laboratory light sources – Part 1: General guidance ISO 16474-2: Paints and varnishes – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps ISO 18909: Photography – Processed photographic colour films and paper prints – Methods for measuring image stability ISO 18930: Imaging materials – Pictorial colour reflection prints – Methods for evaluating image stability under outdoor conditions ISO 18937: Imaging materials – Photographic reflection prints – Methods for measuring indoor light stability ISO 3917: Road vehicles – Safety glazing materials – Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering ISO 4892-1: Plastics – Methods of exposure to laboratory light sources – Part 1: General guidance ISO 4892-2: Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc sources JASO M346: Light-exposure test method by xenon-arc lamp for automotive interior part MIL-STD 810F: Environmental engineering considerations and laboratory tests – Part 2: Laboratory test methods – 505.4: Solar radiation (Sunshine) Peugeot Citroen (PSA) D47 1431: Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures SAE J2412: Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus SAE J2527: Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus VDA 75202: Automotive interior materials – Colorfastness and ageing test against light at high temperatures: Xenon arc VW PV 1303: Non-metallic materials – Lightfastness test for interior parts VW PV 3929: Non-Metallic Materials – Weather Ageing in Dry, Hot Climate VW PV 3930: Non-Metallic Materials – Weathering in Moist, Hot Climate

Seat height: 520 – 680 mm

MEMMERT ICO150 Co2 incubator / oven Equipment in new condition, never used. MEMMERT reference: ICO15 (more)0 Year of manufacture: 2023 Forced convection Volume: 156 liters Stainless steel chamber Screen with large display Temperature: amb +5°C up to +50°C IR probe CO₂: 0 to 20% 1 stainless steel water tray included per incubator Visual and audible alarms Sterilization at 180°C without needing to remove probes Dimensions L x D x H int. : 719 x 591 x 1066 mm Dimensions L x D x H ext. : 560 x 400 x 700 mm Temperature: ambient +5 to 50°C Weight: 92 kg Gross weight: 116 kg Side sheet slightly deformed (see photo) This in no way hinders the proper functioning of this equipment.

Julabo CORIO CP-310F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz Refrigerant  (more) R290 Working Temperature Range -30°C - 220°C Cooling Capacity 300W (at 20°C) Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 CORIO™ CP-310F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.03 °C stability. Suitable for temperature applications with cirulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CP circulator incorporates easy change-over for control of fluid circulation internally or externally and an adjustable pump from 8-27 L/min; 1.5-10.2 PSI. The CORIO CP includes USB-B and RS232 ports for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 300W cooling power at 20 °C with 20W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo CORIO CP-310F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz includes: - 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) - Power Cord - Two Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW