Benchmark BSH300 MyBlock Mini Dry Bath with Cooling

Hermle 10 x 50ml Conical Rotor The Hermle 10 x 50ml Conical Rotor is a high-capacity centrifuge roto (more)r designed for use with Hermle Z32-HK, Z36-HK, Z327, Z366, Z446, and Z496 Series centrifuges. With a maximum speed of 10,500 RPM and a maximum RCF of 16,022 x g, this rotor is capable of efficiently and effectively separating biological samples. Its 38° angle allows for optimal separation, while its maximum capacity of 10 x 50ml provides ample space for larger samples. It is important to note that the maximum speed may vary depending on the centrifuge model used with the rotor. Overall, the Hermle 10 x 50ml Conical Rotor is a reliable and high-performing centrifuge accessory that can help researchers achieve their separation goals. INCLUDED: The Hermle 10 x 50ml Conical Rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Interfurn/ Plinth cabinet with sink/ L.Grey/1800x750x790

Analysis time: 3.5 min at 30 mg N (6.5 min at 200 mg N) Distillation capacity: ~ 40 ml/min Measuring (more) range: 0.1 – 200 mg N Reproducibility: 1% RSD (including digestion step) Recovery: 99.5% for nitrogen levels between 1 – 200 mg N Drain tube: 200 ml in 2 s. Reagent pump volumes: 0 – 150 ml in 10 ml increments Delay: 0 – 999s SAfE Patented: 0 – 15 s Water usage: 2 l/min with water temp of 30°C (During distillation): 1 l/min with water temp of 15°C Dimensions: (WxDxH): 530 x 440 x 760 mm Weight: 35 kg

Water bath from 25°C to 100°C for the laboratory The ring bain maries for columns, Erlenmeyer flasks (more) or beakers are suitable for continuous operation, even unattended, thanks to the standard control of the level and lack of water. LAUDA Hydro water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range of 25 to 100°C. - The opening diameter of the water bath can be changed in approximately 20 mm increments by means of a set of rings that make up the lid. - The H 11 V, H 19 V models have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow use even with chemically aggressive fluids. - Temperature adjustment by knob with graduated scale Simple control: temperature adjustment with graduated knob. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Coherent Sapphire Laser 488-200 CDRH with CDRH HP Controller This was removed from a university lab (more) where it was surplus to requirements. Both units power on with the laser beam working. It was tested with a spare cable from another laser which is not included. It is in good cosmetic condition with some minor marks from use. Controller:-Model - Sapphire CDRH HPPart no. 1100969 Rev. AE Laser head:-Model - Sapphire 488-200 CDRH

Benchtop 222DS LABNET orbital shaker incubator New equipment in its original packaging LABNET brand  (more)Model: I-5222-DS-230V Year of manufacture: 2020 Dimensions L x W x H: 370 x 530 x 400 mm Platform dimensions (not included): 300 x 300mm Height with lid open: 550 mm T° range: ambient +5 °C to 70 °C Uniformity: ± 0.5 °C Accuracy: ± 0.5 °C Weight: 19.5 kg Speed: 20 to 300 rpm Ambient conditions: Operating temperature: 4 to 65 °C Timer: 1 min to 99 h or continuous Stirring: orbital / Amplitude: 19 mm Delivered without tray, can be ordered separately.

Wall-mounting kit has been designed to facilitate installation of PUE 7.1 and PUE C32 terminals on a (more) vertical surface. The kit can be mounted in two positions. Intended use: Easy installation of PUE 7.1 terminal on a vertical surface; Easy installation of PUE C32 terminal on a vertical surface; Mounting the PUE 7.1 terminal to a wall at the angle of 80°; Mounting the PUE C32 terminal to a wall at the angle of 80°; Mounting the PUE 7.1 terminal to a wall at the angle of 55°; Mounting the PUE C32 terminal to a wall at the angle of 55°. Design: The PUE-7-32 wall-mounting kit is manufactured of 1 mm steel, which provides sufficient rigidity. The kit is offered in powder coated mild steel version in colour corresponding to the colour of PUE 7.1 / PUE C32 housing. Multiple technological holes, make it possible to mount the kit in 8 points (4 mounting points for the PUE 7.1 / PUE C32 terminal and 4 mounting points for fixing to a vertical surface).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW