Beckman Coulter SX-4750 Round Bucket Adapter 369292 Set of 4

This system was removed from a university lab as surplus to requirements. The lab reported: "Hasn’t  (more)been used for a few years. I am told it was working fine last time. " Genomic Solutions Cartesian Dispensing System ,Honeybee SD 8+1 Active. Model 6PCSDBXL-00. The system in the perspex enclosure was in good working order prior to it being disconnected. There is also included a spare unit which the university was using to provide spare parts. There are eight tube rails each holding 24 tubes. There are two Dell GX520 PC's that both have Microsoft XP pro installed and the software for the honeybee installed. There are no personal data on either of the units and all passwords and usernames have been changed on both. A HP 1702 monitor, usb keyboard and mouse are also included. It also comes with instruction books and a CD-Rom of software with Cartesian AXSYS V81.6.2. Included are the following; Model Honeybee 8+1 Active (complete)Serial No. H2755 Model Honeybee 8+1 Passive (incomplete)Serial No. HSD2756 2 x Dell Optiplex GX520 PCs running Windows XP ProfessionalSerial Nos. JQBJOB1. BBVD891 HP 1702 17" monitor Serial No. CNN407072Y Dell keyboard RT7D50 Serial No. CN-OW7658-37172-58O-08FI Passed a PAT test on 10.06.24The Honeybee unit powered on with power indicator lights showing on the main panel and injection head.A small vacuum pump powered on and generated suction.The first PC powered on but would not boot up properly, the second booted up and loaded windows and showed the software icons.When the icons were selected attempts were made to communicate with the Honeybee hardware but were not successful.The com cables reconnected into different ports but the data link could not be made. Software:Genomic Solutions AxSys Ver 81.6.2 November 2005 Manuals:3 x Genomic Solutions Training Guide V4 May 20061 x Genomic Systems Cartesian Honeybee Bench-top Protein Crystallisation System Operating Manual Version 1.0 January 2003 Included:8 x 24 position tube holders1 x barcode reader1 x small vacuum pump1 x Dell mouse5 x data cables

Maximum Temperature Homogeneity The aluminum alloy plate ensures a formidable temperature homogeneit (more)y over the entire surface of the plate itself, up to 370°C Low Profile, Attractive Design RC offers an innovative low profile and highly attractive design for greater user comfort. Even the inclination of the front panel has been carefully studied to facilitate its use. - Uniform heat distribution with coated aluminum alloy heating plate - Excellent chemical resistance - Maximum temperature 370°C - Accepts beakers up to 15 liters - Choice of mains voltage / frequency model - Control panel shielded against spills - Designed for maximum durability and backed by a 3-year warranty

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Scilogex MicroPette Plus Autoclavable Pipettor, 2-20ul Volume Range 2-20uL Adjustable or Fixed Volum (more)e Adjustable Volume Accuracy (±%) 0.90/1.20/3.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 2-20ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco RapidVap N2 48-Place Block for 13 mm tubes For use withRapidVap N2/48 Evaporation System. B (more)lock tube capacity: 48. Sample tube size:13 x 100 mm OD tubes, up to 10 ml. Sample volume: 7.5 ml. Actual sample volumedepends on tube shape, height and vortex speed.Blocks fitinside RapidVap Evaporation Systems. Glassware is required (not included). INCLUDED: The Labconco 7482200 RapidVap N2 48-Place Block for 13 mm tubes includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo CORIO C-B5 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C t (more)o 100°C Heating Capacity 1000W Volume 5L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B5 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty