Applied Biosystems MDS Sciex 1007031 rev G MS Ion Source

Boekel Scientific 137100 Pipet Washer/Dryer Combination, 115VThe BoekelScientific 137100 Pipet Washe (more)r/Dryer Combination combines washing, rinsing, anddrying functions in a single unit. It requires less counter space and costsless than conventional separate devices. No need to move wet pipets from washerto dryer. Made from 0.018 stainless steel, type 302. Drying time is one hour.Pilot light indicates heater function. For maximum pipet length: 37.5cm(143/4"). INCLUDED: The Boekel Scientific 137100 Pipet Washer/Dryer Combination, 115V includes: - Stainless Steel Pipette Holder - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

CORNING Lambda Plus 200 adjustable single-channel pipettor Accuracy: ±1.2 to ±0.6% Compatible tips:  (more)200 μl tip For use with: 200µl cone Volume (metric): 20 to 200 μl

Stainless steel storage vessel equipped with a gooseneck supply, vacuum hose for connection to an ex (more)ternal vacuum pump (not included) and drain valve on the bottom. Capacity about 60 L

Eddy Jet 2 reduces costs per test, hands on time, and consumable use during counts while increasing  (more)microbiology lab’s productivity. This cutting-edge spiral plater automates, standardizes and streamlines plate inoculations with its patented cross-contamination-free technology. Microsyringes give the system unique, unmatched advantages that make it a bestseller. The user interface is very intuitive and there are no setup times. Although Eddy Jet 2 is mostly used by food, cosmetic and pharmaceutical labs, any microbiology lab can greatly benefit from its use. This instrument will generate a threefold dilution concentration gradient on a single plate, allowing labs to skip serial dilutions and most platings. Each sample is processed with a brand new sterile microsyringe, making sample handling a cross-contamination-free process. Other than bacterial counts, antimicrobial susceptibility testing (AST) and mutagenicity test applications are also available. Reproducibility: > 99% Time for a full cycle: 30 s (disposable syringes make disinfection unnecessary) Spreading modes stored: 25 spread modes (37 counting those for 150 mm Petri plates) Motion control: 3 Microcontroller-regulated stepper motors Petri plate diameters: 90 and 150 mm Minimum step volume: < 10 nl Maximum pipetted volume: 100 μl Syringe material: Polypropylene Plunger material: Polyethylene H.D. Auto checking: Programmed for 6 regions External balance connection: Serial RS232 DB9 Printer connection: Serial RS232 DB9 Barcode scanner connection: Specific connection for IUL barcode scanner Connection for updates: Ethernet/ USB pen drive Additional connections for peripherals: 2 x USB Host ports Dimensions (WxHxD): 515 x 420 x 500 mm Weight: 20 kg

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

This ATAGO Palette D 2020 Digital Refractometer was removed from a university lab where it was surpl (more)us to requirements. This item is in good cosmetic condition and powers up, unable to test further at our facility.

Hirayama HICLAVE HV-25 Floor-Standing Autoclave, 25L, 120V Chamber Volume 25L Sterilization Temperat (more)ure Range 105°C to 126°C Chamber Dimensions 9.4 x 21.6 in. (24 x 55 cm) Features - Space-saving design with lid opening upward. - Programmable auto-start for initiating a cycle up to 1 week later. - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C. - Automatic air purging by a microprocessor prevents over-pressurization during a cycle. - One-touch lever to easily open and close chamber lid. - Programmable rate of steam exhaust. - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly. The 25-liter (HV-25), 50-liter (HV-50), 85-liter (HV-85), and 110 liter (HV-110) Autoclaves are self-containers, portable floor models mounted on caster wheels. They occupy minimum floor space and can fit conveniently into many locations in the laboratory. Their many uses include the sterilization of agar, media, wastes, glassware, and fermenters, especially for the larger models. INCLUDED: The Hirayama HICLAVE HV-25 Floor-Standing Autoclave, 25L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7&quot; colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal&rsquo;s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

Differential refractometer WATERS 410 HPLC The 410 is a differential refractive index detector desig (more)ned for high performance liquid chromatography applications. It can operate as stand-alone unit with an integrator or chart recorder, or with a system controller or data system. The 410 functions with solvents with refractive indices between 1.00 and 1.75. The measurement range of the instrument is 5×10(-8) to 5×10(-3) refractive index units (RIU) full scale. Flow rate: 0.3…10 ml/min. Housing (D)x(H)x(W): 49 x 23 x 28,6 cm. Unit powers up as shown in pictures. Equipment not tested

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW