Agilent 1200 Series HPLC Solvent Tray Lösungsmittelschale

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Polyscience P10N6A101B IP-100 Immersion Probe Cooler, 3 Rigid Coil Probe, -100 to -60C, 120V, 60Hz3D (more) Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P10N6A101B IP-100 Immersion Probe Cooler, -100°C to -60°C, 85W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco 1200ml Complete Fast-Freeze FlaskCompleteFlask consists of 7543000 Flask Bottom, 7544400 Fl (more)ask Top and a supply offilter paper.Fast-FreezeFlasks attach with adapters to valve ports on Labconco Drying Chambers andManifolds. They are available in clear or amber-colored glass. A completeFast-Freeze Flask consists of a rubber top, glass bottom and a supply of filterpaper.Tops, bottomsand filter paper are available separately as replacement components. Adaptersare available in borosilicate glass or stainless steel. Fast-Freeze Flasks andAdapters are compatible with any brand freeze dryer that has 1/2" or3/4" diameter valve ports.Glass flaskswithstand maximum temperature of 490º C. Flask toppers withstand a maximumtemperature of 450º C.INCLUDED: The Labconco 7541000 1200ml Complete Fast-Freeze Flask includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

WTW OXI 3205 portable oximeter Without probe Waterproof dissolved oxygen measuring instrument Batter (more)y type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

ceramic desiccant plate for 280mm VWR desiccator VWR reference: 467-0104 For Desiccator Ø 28 cm Cent (more)ral hole Ø 20 mm, filter holes Ø approx. 5 mm New condition

The EASYSOFT SXT2 consists of a plastic softener tank with internal water distributors. In the integ (more)rated salt storage vessel, brine is automatically prepared for the resin regenerations. Furthermore, the EASYSOFT SXT2 is equipped with an integrated double 3-way bypass valve for decommissioning the water softener while preserving the water supply. On the SXT2 version of this model, a fully automatic control valve (with built-in microprocessor) is mounted on the tank. This ensures the regeneration of the resin. The EASYSOFT SXT2 is also equipped with a mixing device integrated in the control valve to set a residual hardness. The regeneration of this microprocessor controlled water softener can be done in three ways: volume, time and a combination of the two. Capacity: 450 l/h Period capacity (at 10 °dH) min/max: 2.0/3.4 m3 Salt consumption per complete regeneration min/max: 0.7/2.2 kg Resin content per tank: 9 l Salt container content: 25 kg Required water pressure min/max: 2.0/7.0 bar Dimensions (WxDxH): 262 x 463 x 640 mm

THis was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)none of the objectives are particularly clear, and two don't show an image at all (detailed below). The unit is quite stiff and awkward to use. For these reasons it is sold for spares/repairs. It is in reasonable good cosmetic condition with minor marks. 2x Carl Zeiss Kpl 8x Eyepieces 1x Leitz Wetzlar H 20x/0.40 ∞/1.80 Quarzgl. (no clear image) 1x Carl Zeiss 4494688 Ph2 40x/0.75 160/0.17 1x Carl Zeiss 4459404 Ph2 NEOFLAUR 25x/0.60 160/0.17 1x Carl Zeiss 4836489 Ph2 NEOFLAUR 16x/0.40 160/- 1x Carl Zeiss 4111437 Ph3 NEOFLAUR 100x/1.25 oil 160/- (no clear image). 1x Carl Zeiss Nose Piece III RS 46 62 49-9904 1x Carl Zeiss Stage 47 33 56-9901 1x Carl Zeiss Condenser 4680811 1x Carl Zeiss Microscope power supply 47 20 83 6 volt and 12 volt output. 1x Carl Zeiss Lamp power supply VHW 50f-2b 39 26 41 showing 365 hours and 55 minutes. 1x Carl Zeiss Lamp 12 volt 100 w 46 8019-9901 1x Carl Zeiss Lamp HBO 50 w 46 80 32-9902

Vacuubrand Vakuum-Pump system BVC 81 This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and runs. The tube connecting the pump to the bottle has been snapped off, allowing all the air to escape before it converts into the bottle. This tubing will need to be replaced but is a consumable. Unable to test further at our facility.

KNF IP65 UFEM 1.10 TT.18RCP2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to su (more)it most laboratory liquid metering and dosing needs. The UFEM 1.10 FT.18RCP2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1 – 999 mL. It is constructed with the following chemically-resistant fluoropolymer flow path materials: PTFE head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduces flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 TT.18RCP2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty