4x Thermo Scientific Adapter Transparent TX400 12x Tubes

VACUUBRAND MD 4C NT +AK SYNCHRO+EK Chemistry Vacuum System Ultimate Vacuum 1.5 mbar Max. pumping s (more)peed at 60 Hz 2.2 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Simultaneous operation of two independent vacuum applications, with reliable check valves to prevent interference between systems - Excellent environmental friendliness due to efficient solvent recovery This chemistry vacuum system provides the simultaneous operation of two processes with only one pump. Typical applications are rotary evaporators, vacuum concentrators and vacuum drying ovens. Each vacuum connection is provided with a manual valve to regulate the effective flow at each port. The MD 4C NT pump offers more than sufficient pumping speed also for the parallel operation of two challenging applications. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment.INCLUDED: The VACUUBRAND MD 4C NT +AK SYNCHRO+EK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

RS 232 cable: MAS.1 module - computer. Cable length: 2 m Compatible with: MAS.1 module MAS.1.R modul (more)e

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

Polyscience SD15H170-A11B 15L Heated Circulator, Standard Digital (Ambient +10 to 170C), 120V, 60HzP (more)olyScience Circulating Bath with Standard DigitalTemperature Controller. Extremely easy to use and maintain, it combines designinnovation with highly intuitive operation to deliver convenient and reliableliquid temperature control for a wide range of applications.Features Large, universal icon and English display Swivel 180™ Rotating Controller On-board connectivity: RS-232 serial output On-screen prompts Automatic performance optimization Single-point calibration capability INCLUDED: The Polyscience SD15H170-A11B 15L Heated Circulator, Standard Digital (Ambient +10 to 170C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 022653008 Aerosol-Tight Rotor FA-45-24-11 with AT lid The Eppendorf 022653008 Aerosol-Tigh (more)t Rotor FA-45-24-11 with AT lid for 1.5/2 mL Tubes, 24-Place is for use with microcentrifuge models 5424. The rotor has a maximum rotational speed of 15,000 RPM and is used for centrifugation of standard application lab samples. The rotor has a 24-place tube array that holds 1.5 mL/2.0 mL tubes, and includes a certified aerosol-tight lid for working with hazardous samples. Both the rotor and lid are autoclavable at 121 degrees C for 20 minutes. This fixed-angle rotor is an accessory for use with Eppendorf centrifuge model 5424, which spins biological lab samples at high speeds to separate cellular material into component parts.

Formulatrix Tempest V.2 Liquid Handler with Pumping Box This item was removed from a university labo (more)ratory where it was surplus to requirements. The liquid handler and pump box are in good cosmetic condition, and power on. The previous client has reported that the system is not in working order, as it requires a PF shared control valve (Mantis CF solenoid). Due to the client's statement, this system is listed as Spares/Repair. Software and a compatible computer are required for operation. Components:- Formulatrix Tempest V.2 - Serial No.: 0117 - Pump Box V2.1 - Serial No.: 0169 Includes:- 18 x Silicone Nozzle Strip-HV 0.35mm (PN: 207459_A) - 7 x Silicone Nozzle Strip-HV 0.15mm (PN: 204694) - 7 x Low Volume Silicone Chips (Volume 1 µL & 0.2 µL) - 1 x High Volume Silicone Chip (Volume 5 µL & 1 µL) - Tube connectors - 2 x Holders

This Perkin Elmer GC Gas Chromatograph Clarus 480 was removed from a university lab where it was sur (more)plus to requirements. It is in reasonably good cosmetic condition and powers up. The original ECD detector has been removed, leaving mains cables exposed, therefore, this item is listed as Spares/Repair. Part number- N664948ESerial number- 480S13030901

Motic PA53MET-BD-T Trinocular Upright Industrial Microscope, Reflected & Transmitted Illuminatio (more)n Objectives S-APO S-APO BD 5X, 10X, 20X, 50X Objectives Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Expertly designed, carefully crafted, high-performance Motic objective lenses provide excellent clarity in any observation environment. - Intelligent, Sleek Design to guarantee efficient use of limited laboratory space. - Advanced ergonomic design, compact size, carefully sourced high-quality materials ensure durability. - Versatile digital capabilities limit operator fatigue during extended periods of operation. - Innovative Module Design. - Interchangeable individual modules meet the needs of any application. - You can select the appropriate optional accessories for your task: reflected light illuminators, transmitted light illuminators, XY stage, Z-axis, etc. The Motic PA53MET-BD-T is an advanced trinocular metallurgical microscope designed for both bright field and dark field observation. It features a reflected intermediate illumination system and a powerful 100W halogen lamp, complemented by a transmitted illumination system with a Long Working Distance (LWD) condenser. The microscope includes widefield eyepieces with 10X magnification and a 25mm field of view. Its coded quintuple revolving nosepiece supports bright field and dark field (BD) and features a slot for Differential Interference Contrast (DIC). Plan S-APO BD objectives are available in 5X, 10X, 20X, and 50X magnifications. The PA53MET-BD-T is highly modular, allowing future upgrades for motorized components, including a motorized stage for low magnification tiling of large samples. INCLUDED: The Motic PA53MET-BD-T Trinocular Upright Industrial Microscope, Reflected & Transmitted Illumination includes: - S-APO S-APO BD 5X, 10X, 20X, 50X Objectives - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty